P2138 2011 Toyota Camry Code - Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation
Quick Answer
The P2138 code on a 2011 Toyota Camry indicates an issue with the Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation. Common causes include Faulty throttle pedal position sensor, Faulty throttle position sensor, Corroded or damaged wiring harness. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2138 2011 Toyota Camry indicates Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation.
- Common causes
- Common causes include Faulty throttle pedal position sensor, Faulty throttle position sensor, Corroded or damaged wiring harness.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2138 2011 Toyota Camry Description
The P2138 code on a 2011 Toyota Camry indicates an issue with the Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation. This means that there is a discrepancy between the voltage signals being sent by the throttle pedal position sensor and the throttle position sensor. The throttle pedal position sensor is responsible for sending information to the engine control module (ECM) about how much the driver is pressing on the accelerator pedal. The throttle position sensor, on the other hand, tells the ECM the actual position of the throttle plate in the intake manifold.
Common Causes of P2138 2011 Toyota Camry
- Faulty throttle pedal position sensor
- Faulty throttle position sensor
- Corroded or damaged wiring harness
- Issues with the ECM
- Poor electrical connections
Symptoms of P2138 2011 Toyota Camry
- Check engine light illuminated
- Reduced engine power
- Hesitation or stumbling during acceleration
- Rough idling or stalling
- Poor fuel efficiency
How to Fix P2138 2011 Toyota Camry
- Diagnose the specific cause of the issue by using a diagnostic scanner to read the fault codes and test the throttle pedal position sensor and throttle position sensor's voltage outputs.
- Inspect the wiring harness for any signs of damage, corrosion, or loose connections. Repair or replace any faulty wiring as needed.
- Test the throttle pedal position sensor and throttle position sensor for proper operation. Replace any sensors that are found to be faulty.
- Clear the fault codes from the ECM's memory and perform a throttle relearn procedure to ensure proper calibration.
- Test drive the vehicle to confirm that the issue has been resolved and that the symptoms have been eliminated.
Cost to Fix P2138 2011 Toyota Camry
The cost of repairing a P2138 code on a 2011 Toyota Camry can vary depending on the specific cause of the issue. In general, the cost of parts such as a throttle pedal position sensor or throttle position sensor can range from $50 to $200 each. Labor costs at auto repair shops typically range from $80 to $150 per hour, with the total repair time likely taking around 1-2 hours. This would bring the total repair cost to approximately $200 to $500, including parts and labor. It's advisable to check with local auto repair shops for more accurate estimates based on your location and vehicle.
Need more information about the P2138 2011 Toyota Camry code?
Need more information on how to fix the P2138 2011 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2138 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2138 2011 Toyota Camry Code
1. What does the OBDII code P2138 mean in a 2011 Toyota Camry?
P2138 indicates a voltage correlation issue between the throttle pedal position sensors 'D' and 'E', meaning the signals from the two sensors don't match as expected.
2. What are the common symptoms of code P2138 in a 2011 Toyota Camry?
Common symptoms include reduced engine power, activation of the "limp mode," hesitation during acceleration, and illumination of the check engine light.
3. What causes the P2138 code in a 2011 Toyota Camry?
Typical causes include a faulty throttle pedal position sensor, damaged wiring or connectors, corrosion in the electrical connections, or issues with the engine control module (ECM).
4. Can I drive my 2011 Toyota Camry with the P2138 code?
It’s not recommended to drive with this code active, as it can lead to unpredictable acceleration issues or reduced power, potentially creating unsafe driving conditions.
5. How do throttle pedal position sensors 'D' and 'E' work?
These sensors monitor the position of the accelerator pedal and send two separate voltage signals to the ECM to ensure accurate throttle control and redundancy for safety.
6. How can I fix the P2138 code on my 2011 Toyota Camry?
Start by inspecting and repairing any damaged wiring or corroded connectors. If the problem persists, consider replacing the throttle pedal assembly, as it contains the position sensors.
7. What tools are needed to diagnose P2138 in a 2011 Toyota Camry?
You’ll need an OBDII scanner, a multimeter to test voltage and continuity, and potentially a service manual for wiring diagrams.
8. How much does it cost to repair a P2138 code on a 2011 Toyota Camry?
Repair costs can range from $100 to $300 for parts and labor if replacing the throttle pedal assembly, but more extensive electrical repairs could increase the cost.
9. Can a dirty throttle body cause the P2138 code?
While a dirty throttle body isn’t a direct cause, it can exacerbate throttle control issues. Cleaning the throttle body may help, but focus on the pedal position sensor and wiring first.
10. Will clearing the P2138 code with a scanner fix the issue?
Clearing the code will turn off the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P2138 2011 Toyota Camry OBDII Code
Code P2138 2011 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.