P2138 2010 Toyota Camry Code - Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation
Quick Answer
The P2138 diagnostic trouble code (DTC) for a 2010 Toyota Camry indicates a problem with the correlation between the throttle pedal position sensor and the throttle position sensor. Common causes include Faulty throttle pedal position sensor, Faulty throttle position sensor, Wiring or connector issues in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2138 2010 Toyota Camry indicates Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation.
- Common causes
- Common causes include Faulty throttle pedal position sensor, Faulty throttle position sensor, Wiring or connector issues in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2138 2010 Toyota Camry Description
The P2138 diagnostic trouble code (DTC) for a 2010 Toyota Camry indicates a problem with the correlation between the throttle pedal position sensor and the throttle position sensor. In this specific case, sensors 'D' and 'E' are being referenced. These sensors are crucial components of the vehicle's electronic throttle control system, which regulates the amount of air entering the engine to control acceleration.
Common Causes of P2138 2010 Toyota Camry
- Faulty throttle pedal position sensor
- Faulty throttle position sensor
- Wiring or connector issues in the sensor circuit
- Corrosion or contamination affecting sensor signals
- ECM software or hardware issues
Symptoms of P2138 2010 Toyota Camry
- Reduced engine power or acceleration
- Engine stalling or hesitation
- Illuminated Check Engine Light
- Rough idling or uneven engine performance
- Difficulty maintaining a consistent speed
How to Fix P2138 2010 Toyota Camry
- Diagnose the specific sensor causing the issue using a scan tool to monitor sensor readings.
- Inspect the wiring and connectors for any damage, corrosion, or loose connections.
- Replace the faulty sensor(s) with OEM or high-quality aftermarket parts.
- Clear the DTC and perform a throttle relearn procedure to recalibrate the sensors.
- Test drive the vehicle to ensure the issue has been resolved and the code does not return.
Cost to Fix P2138 2010 Toyota Camry
The cost of repairing a P2138 code on a 2010 Toyota Camry can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay between $200 and $500 for parts and labor. Keep in mind that diagnostic time and labor rates can vary, so it's recommended to get a quote from a reputable auto repair shop in your area before proceeding with the repair.
Tech Notes for P2138 2010 Toyota Camry
Need more information about the P2138 2010 Toyota Camry code?
Need more information on how to fix the P2138 2010 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2138 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2138 2010 Toyota Camry Code
1. What does OBDII code P2138 mean for a 2010 Toyota Camry?
P2138 indicates a voltage correlation issue between the throttle pedal position sensor circuits 'D' and 'E', which monitor the accelerator pedal's movement.
2. What are the common symptoms of code P2138 in a 2010 Toyota Camry?
Symptoms may include reduced engine power, the Check Engine Light or Reduced Power Light illuminating, and unresponsive or inconsistent throttle behavior.
3. What causes OBDII code P2138 in a 2010 Toyota Camry?
Common causes include a faulty throttle pedal position sensor, damaged wiring or connectors, or corrosion in the electrical connections.
4. Can I drive my 2010 Toyota Camry with a P2138 code?
It’s not recommended, as the vehicle may go into "limp mode," limiting power and creating potential safety issues while driving.
5. How do I diagnose a P2138 code on a 2010 Toyota Camry?
Start by inspecting the throttle pedal position sensor, checking for damaged wiring, loose connections, or corrosion. Use a scan tool to monitor sensor voltage readings.
6. What is the throttle pedal position sensor in a 2010 Toyota Camry?
The throttle pedal position sensor detects the position of the accelerator pedal and sends voltage signals to the engine control module (ECM) for throttle control.
7. How much does it cost to fix a P2138 code on a 2010 Toyota Camry?
Repair costs can vary, but replacing the throttle pedal position sensor generally costs between $100 and $300, including parts and labor.
8. Can a weak battery cause a P2138 code in a 2010 Toyota Camry?
While rare, voltage issues from a weak battery or charging system problems could potentially affect sensor performance and cause this code.
9. Is replacing the throttle pedal position sensor the only fix for P2138?
Not always. The issue could also be with wiring, connectors, or the ECM. Proper diagnostics should be performed before replacing parts.
10. How can I prevent P2138 from recurring in my 2010 Toyota Camry?
Regularly inspect and maintain the wiring and connectors around the throttle pedal and ensure the sensor is clean and functioning properly.
Discuss the causes and fixes for P2138 2010 Toyota Camry OBDII Code
Code P2138 2010 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.