P2138 2009 Nissan Sentra Code - Accelerator Pedal Position Sensor Circuit Range/Performance
Quick Answer
The P2138 code for a 2009 Nissan Sentra indicates a problem with the Accelerator Pedal Position Sensor Circuit Range/Performance. Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or poor connections in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2138 2009 Nissan Sentra indicates Accelerator Pedal Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or poor connections in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2138 2009 Nissan Sentra Description
The P2138 code for a 2009 Nissan Sentra indicates a problem with the Accelerator Pedal Position Sensor Circuit Range/Performance. This sensor is responsible for monitoring the position of the accelerator pedal and sending this information to the engine control module (ECM) to adjust the throttle accordingly. When the sensor detects an issue within its circuit or performance range, it triggers the P2138 code.
Common Causes of P2138 2009 Nissan Sentra
- Faulty accelerator pedal position sensor
- Damaged wiring or connectors in the sensor circuit
- Corrosion or poor connections in the sensor circuit
- Issues with the ECM communication
- Accelerator pedal sensor misalignment
Symptoms of P2138 2009 Nissan Sentra
- Delayed throttle response
- Lack of power during acceleration
- Engine stalling or hesitation
- Illuminated Check Engine Light
- Reduced fuel efficiency
How to Fix P2138 2009 Nissan Sentra
- Diagnose the code using a diagnostic scanner to pinpoint the exact cause of the issue.
- Inspect the accelerator pedal position sensor and its wiring for any signs of damage or corrosion.
- Test the sensor's functionality using a multimeter to check for proper voltage readings.
- Replace the accelerator pedal position sensor if it is found to be faulty.
- Clear the code from the ECM's memory and perform a test drive to ensure the issue has been resolved.
Cost to Fix P2138 2009 Nissan Sentra
The typical repair costs for addressing the P2138 code on a 2009 Nissan Sentra can range from $150 to $400, depending on the exact cause of the issue and the cost of replacement parts. This estimate includes the cost of the accelerator pedal position sensor and any additional labor charges. It is advisable to consult with a certified mechanic or auto repair shop for a more accurate cost estimate based on your specific vehicle and location. Keep in mind that labor rates can vary, so it's recommended to shop around for the best deal.
Need more information about the P2138 2009 Nissan Sentra code?
Need more information on how to fix the P2138 2009 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2138 2009 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2138 2009 Nissan Sentra Code
1. What are the common symptoms of OBDII code P2138 in a 2009 Nissan Sentra?
- Common symptoms include loss of power, engine hesitation, and in some cases, the vehicle may go into "limp mode."
2. What can cause the OBDII code P2138 to appear in a 2009 Nissan Sentra?
- The code P2138 is typically triggered by issues with the accelerator pedal position sensor or the throttle position sensor.
3. How serious is the OBDII code P2138 in a 2009 Nissan Sentra?
- This code is considered serious as it can affect the drivability of the vehicle and may lead to unsafe driving conditions if not addressed promptly.
4. Can I still drive my 2009 Nissan Sentra with the OBDII code P2138?
- It is not recommended to drive the vehicle with this code present, as it may lead to further damage or safety risks.
5. How can I diagnose the OBDII code P2138 in my 2009 Nissan Sentra?
- Diagnosing the issue typically involves using a scan tool to check for the code, inspecting the accelerator pedal position sensor, and testing the throttle position sensor.
6. Is it possible to reset the OBDII code P2138 in a 2009 Nissan Sentra?
- While you can clear the code with a scan tool, it is important to address the underlying issue causing the code to prevent it from reoccurring.
7. What are some repair tips for fixing the OBDII code P2138 in a 2009 Nissan Sentra?
- Repair tips may include checking the wiring harness for damage, ensuring proper sensor connections, and replacing the faulty sensor if needed.
8. Can a DIY enthusiast fix the OBDII code P2138 in a 2009 Nissan Sentra?
- Depending on your mechanical skills and access to tools, some DIY enthusiasts may be able to diagnose and repair this issue. However, it is recommended to consult a professional if unsure.
9. How much does it cost to repair the OBDII code P2138 in a 2009 Nissan Sentra?
- The cost of repairs can vary depending on the root cause of the issue, but it may involve sensor replacement, which can range from $100 to $300 or more, including labor costs.
10. How often does the OBDII code P2138 occur in a 2009 Nissan Sentra?
- While not extremely common, this code can still occur due to sensor failures, wiring issues, or other related problems in the accelerator pedal position circuit.
Discuss the causes and fixes for P2138 2009 Nissan Sentra OBDII Code
Code P2138 2009 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.