P2138 2009 Nissan Pathfinder Code - Accelerator Pedal Position Sensor Circuit Range/Performance
Quick Answer
The P2138 code for a 2009 Nissan Pathfinder indicates a problem with the accelerator pedal position sensor circuit's range or performance. Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the sensor circuit, ECM malfunction or software issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2138 2009 Nissan Pathfinder indicates Accelerator Pedal Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the sensor circuit, ECM malfunction or software issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2138 2009 Nissan Pathfinder Description
The P2138 code for a 2009 Nissan Pathfinder indicates a problem with the accelerator pedal position sensor circuit's range or performance. This sensor is crucial for the vehicle's electronic throttle control system, as it communicates the position of the accelerator pedal to the engine control module (ECM). The ECM uses this information to regulate the amount of fuel injected into the engine, adjusting the vehicle's speed accordingly.
Common Causes of P2138 2009 Nissan Pathfinder
- Faulty accelerator pedal position sensor
- Damaged wiring or connectors in the sensor circuit
- ECM malfunction or software issues
- Corrosion or contamination affecting sensor performance
Symptoms of P2138 2009 Nissan Pathfinder
- Hesitation or lack of response when pressing the accelerator pedal
- Rough idling or stalling
- Inability to accelerate or reach higher speeds
- Limp mode activation, limiting the vehicle's speed
How to Fix P2138 2009 Nissan Pathfinder
- Conduct a thorough diagnostic scan to confirm the P2138 code and identify the specific cause of the issue.
- Inspect the accelerator pedal position sensor, wiring, and connectors for any signs of damage or corrosion.
- Test the sensor's functionality using a multimeter to ensure accurate readings.
- Replace the accelerator pedal position sensor if it is found to be faulty, ensuring proper installation and calibration.
- Clear the diagnostic trouble codes, reset the ECM, and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P2138 2009 Nissan Pathfinder
The typical repair costs for addressing a P2138 code in a 2009 Nissan Pathfinder can range from $200 to $500, including parts and labor. However, the actual cost may vary depending on the specific cause of the issue, the quality of replacement parts used, and the labor rates charged by auto repair shops. It's recommended to inquire about local rates and obtain multiple quotes for a more accurate estimate.
Need more information about the P2138 2009 Nissan Pathfinder code?
Need more information on how to fix the P2138 2009 Nissan Pathfinder code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2138 2009 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2138 2009 Nissan Pathfinder Code
1. What are the common symptoms of OBDII code P2138 in a 2009 Nissan Pathfinder?
- Common symptoms include reduced engine power, sluggish acceleration, and the vehicle going into "limp mode" to prevent further damage.
2. What is the main cause of OBDII code P2138 in a 2009 Nissan Pathfinder?
- The main cause is usually a malfunction or failure of the accelerator pedal position sensor or the throttle position sensor.
3. How can I diagnose the issue causing OBDII code P2138 in my 2009 Nissan Pathfinder?
- A diagnostic scan tool can be used to read the code and determine if the accelerator pedal position sensor or throttle position sensor is faulty. Additionally, inspecting the wiring and connectors for any damage or loose connections is recommended.
4. Can I continue driving my 2009 Nissan Pathfinder with OBDII code P2138 present?
- It is not recommended to continue driving the vehicle with this code present, as it can lead to further damage and potential safety hazards due to reduced engine power.
5. What is the repair process for fixing OBDII code P2138 in a 2009 Nissan Pathfinder?
- The repair process typically involves replacing the faulty accelerator pedal position sensor or throttle position sensor. It is important to use OEM parts and follow proper installation procedures.
6. Are there any DIY tips for troubleshooting OBDII code P2138 in a 2009 Nissan Pathfinder?
- DIY tips include checking the sensor connectors for corrosion, ensuring proper voltage supply to the sensors, and performing a visual inspection of the sensor components for any signs of damage.
7. How much does it cost to repair OBDII code P2138 in a 2009 Nissan Pathfinder?
- The cost of repairing this code can vary depending on the extent of the damage and whether you choose to do the repair yourself or take it to a professional mechanic. Replacement sensors can range from $50 to $200.
8. Will resetting the OBDII code P2138 in my 2009 Nissan Pathfinder make it go away permanently?
- Resetting the code without addressing the underlying issue will not make it go away permanently. The root cause of the problem must be diagnosed and fixed to prevent the code from reappearing.
9. Can extreme weather conditions affect the occurrence of OBDII code P2138 in a 2009 Nissan Pathfinder?
- Yes, extreme weather conditions can potentially affect the sensors and wiring associated with the accelerator pedal and throttle, leading to the triggering of OBDII code P2138.
10. Is OBDII code P2138 a common issue in 2009 Nissan Pathfinders?
- While not extremely common, OBDII code P2138 related to accelerator pedal position sensor circuit range/performance issues can occur in 2009 Nissan Pathfinders due to sensor wear, electrical problems, or other factors.
Discuss the causes and fixes for P2138 2009 Nissan Pathfinder OBDII Code
Code P2138 2009 Nissan Pathfinder comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.