|What are the Possible Causes of the P2138 2008 NISSAN ROGUE Code?
Faulty Accelerator Pedal Position Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Electric Throttle Control Actuator
Crankshaft position sensor (POS)
Refrigerant pressure sensor
EVAP control system pressure sensor
|How to Fix the P2138 2008 NISSAN ROGUE Code?
Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the P2138 2008 NISSAN ROGUE code?
The cost to diagnose the P2138 2008 NISSAN ROGUE code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are P2138 2008 NISSAN ROGUE code possible symptoms?
Engine Light ON (or Service Engine Soon Warning Light)
No Accelerator Pedal respsonse
|What Does the P2138 2008 NISSAN ROGUE Code Mean?
The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM).
Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM.
In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals.
Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation
such as fuel cut.
Accelerator Pedal Position Sensor Circuit Range/Performance
|Need more information with the P2138 2008 NISSAN ROGUE code?