P2138 2008 Honda Accord Code - Accelerator Pedal Position Sensor 1/2 Incorrect Voltage
Quick Answer
The P2138 diagnostic trouble code (DTC) for a 2008 Honda Accord indicates that there is an issue with the Accelerator Pedal Position Sensor 1/2 Incorrect Voltage. Common causes include Faulty accelerator pedal position sensor, Wiring harness issues, Corrosion or poor connections in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2138 2008 Honda Accord indicates Accelerator Pedal Position Sensor 1/2 Incorrect Voltage.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Wiring harness issues, Corrosion or poor connections in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2138 2008 Honda Accord Description
The P2138 diagnostic trouble code (DTC) for a 2008 Honda Accord indicates that there is an issue with the Accelerator Pedal Position Sensor 1/2 Incorrect Voltage. This means that the voltage signals from the accelerator pedal position sensors are not within the expected range, causing a discrepancy in the readings received by the Engine Control Module (ECM). The accelerator pedal position sensor is a crucial component that communicates the driver's input to the ECM, allowing the vehicle to adjust fuel delivery and ignition timing accordingly.
Common Causes of P2138 2008 Honda Accord
- Faulty accelerator pedal position sensor
- Wiring harness issues
- Corrosion or poor connections in the sensor circuit
- ECM malfunction
- Environmental factors such as moisture or debris affecting sensor performance
Symptoms of P2138 2008 Honda Accord
- Hesitation or lack of response when accelerating
- Rough idling or stalling
- Sudden loss of power while driving
- Vehicle going into limp mode
- Check Engine Light illuminated on the dashboard
How to Fix P2138 2008 Honda Accord
- Begin by conducting a comprehensive diagnostic scan to confirm the P2138 code and identify the specific cause of the issue.
- Inspect the wiring harness and connections for any signs of damage, corrosion, or loose connections. Repair or replace as needed.
- Test the accelerator pedal position sensors to determine if they are functioning correctly. Replace any faulty sensors.
- Clear the DTC and reset the ECM to ensure the code does not reappear.
- Test drive the vehicle to verify that the issue has been resolved and that the accelerator pedal position sensors are providing accurate voltage signals to the ECM.
Cost to Fix P2138 2008 Honda Accord
The typical repair costs for addressing a P2138 code on a 2008 Honda Accord can vary depending on the specific cause of the issue. Parts such as a new accelerator pedal position sensor or wiring harness repairs may range from $100 to $300, while labor costs can add an additional $100 to $200. Overall, the total repair costs for this issue may fall within the range of $200 to $500. However, it is essential to note that diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check with local auto repair shops for a more accurate estimate based on your specific circumstances.
Need more information about the P2138 2008 Honda Accord code?
Need more information on how to fix the P2138 2008 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2138 2008 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2138 2008 Honda Accord Code
1. What are the common symptoms of OBDII code P2138 on a 2008 Honda Accord?
Symptoms may include reduced engine power, hesitation or stalling when accelerating, illuminated Check Engine Light, and difficulty maintaining a steady speed.
2. What does the OBDII code P2138 for a 2008 Honda Accord mean?
This code indicates that there is an incorrect voltage correlation between the accelerator pedal position sensor 1 and sensor 2.
3. What are the possible causes of OBDII code P2138 on a 2008 Honda Accord?
Common causes include a faulty accelerator pedal position sensor, issues with the throttle position sensor, wiring or connector problems, or a malfunction in the engine control module.
4. How can I diagnose the OBDII code P2138 on my 2008 Honda Accord?
Diagnosis typically involves checking the voltage readings from the accelerator pedal position sensor 1 and sensor 2, inspecting the wiring and connectors for damage, and testing the throttle position sensor.
5. Can I drive my 2008 Honda Accord with OBDII code P2138?
It is not recommended to drive the vehicle with this code present, as it can lead to unsafe driving conditions and potential damage to the engine or other components.
6. How can I repair OBDII code P2138 on my 2008 Honda Accord?
Repair options may include replacing the accelerator pedal position sensor, repairing or replacing damaged wiring or connectors, resetting the engine control module, or seeking professional help for further diagnosis.
7. Will resetting the Check Engine Light resolve OBDII code P2138 on a 2008 Honda Accord?
Resetting the light may temporarily clear the code, but it is important to address the underlying issue causing the code to prevent it from reoccurring.
8. How much does it typically cost to repair OBDII code P2138 on a 2008 Honda Accord?
Repair costs can vary depending on the specific cause of the code, but it is advisable to budget for sensor replacement, wiring repairs, or potential diagnostic fees from a mechanic.
9. Is OBDII code P2138 a common issue in 2008 Honda Accords?
While not extremely common, some owners of 2008 Honda Accords have reported experiencing this code, particularly in vehicles with higher mileage or wear on sensor components.
10. Can a DIY enthusiast with basic automotive skills fix OBDII code P2138 on a 2008 Honda Accord?
Depending on the specific cause of the code, some DIY enthusiasts may be able to address the issue by replacing sensors or checking wiring connections, but professional diagnostic tools and expertise may be necessary for a more accurate diagnosis and repair.
Discuss the causes and fixes for P2138 2008 Honda Accord OBDII Code
Code P2138 2008 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.