P2135 Jeep Code - Throttle Position Sensor 1/2 Correlation
Quick Answer
The P2135 diagnostic trouble code (DTC) for Jeep vehicles indicates a Throttle Position Sensor (TPS) 1/2 correlation issue. Common causes include Faulty TPS sensors, Wiring issues or corrosion in the TPS sensor circuit, Throttle body malfunction or dirty throttle plate. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2135 Jeep indicates Throttle Position Sensor 1/2 Correlation.
- Common causes
- Common causes include Faulty TPS sensors, Wiring issues or corrosion in the TPS sensor circuit, Throttle body malfunction or dirty throttle plate.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2135 Jeep Description
The P2135 diagnostic trouble code (DTC) for Jeep vehicles indicates a Throttle Position Sensor (TPS) 1/2 correlation issue. This means that there is a discrepancy between the signals sent by the two TPS sensors in the vehicle, causing a misalignment in the throttle position data. The TPS is a crucial component that monitors the position of the throttle valve in the engine. When the TPS 1 and TPS 2 signals do not match, it can lead to incorrect fuel delivery and air-fuel mixture, resulting in drivability issues and potential damage to the engine over time.
Common Causes of P2135 Jeep
- Faulty TPS sensors.
- Wiring issues or corrosion in the TPS sensor circuit.
- Throttle body malfunction or dirty throttle plate.
- Electronic control module (ECM) failure.
- Poor electrical connections or grounds.
Symptoms of P2135 Jeep
- Erratic acceleration or deceleration.
- Engine stalling or hesitation during acceleration.
- Poor fuel efficiency.
- Illumination of the Check Engine Light.
- Reduced engine performance or power output.
How to Fix P2135 Jeep
- Begin by diagnosing the specific TPS sensor that is causing the correlation issue.
- Inspect and test the TPS sensors, wiring, and connections for any faults or damage.
- Clean the throttle body and throttle plate to ensure proper operation.
- Replace any faulty TPS sensors, wiring, or components as needed.
- Clear the error codes and perform a throttle relearn procedure to calibrate the TPS sensors.
Cost to Fix P2135 Jeep
The cost to repair a P2135 code in a Jeep vehicle can vary depending on the specific cause of the issue and the parts required for the repair. On average, the cost to replace a TPS sensor can range from $50 to $200, while additional labor charges may apply. Overall, the total repair cost for this issue could range from $100 to $400, including parts and labor. It is recommended to consult with a trusted auto repair shop for an accurate estimate based on your vehicle's make and model.
Need more information about the P2135 Jeep code?
Need more information on how to fix the P2135 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2135 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2135 Jeep Code
What does OBDII code P2135 mean on a Jeep?
Code P2135 indicates a "Throttle Position Sensor 1/2 Correlation," meaning the two throttle position sensors are reporting inconsistent signals to the engine control module.
What are the common symptoms of code P2135 on a Jeep?
Symptoms include poor acceleration, engine hesitation, reduced power, stalling, or the vehicle entering "limp mode."
What causes code P2135 on a Jeep?
Common causes include a faulty throttle position sensor, damaged wiring, connector issues, or a malfunctioning throttle body assembly.
Can a dirty throttle body cause P2135 on a Jeep?
Yes, a dirty or carbon-clogged throttle body can cause issues with the sensors, leading to this code.
How do you fix Jeep code P2135?
Repairs may include cleaning the throttle body, replacing the throttle position sensors, inspecting and repairing wiring, or replacing the entire throttle body assembly.
Is code P2135 safe to drive with on a Jeep?
Driving with code P2135 is not recommended, as the vehicle may enter limp mode or stall unexpectedly, posing safety risks.
How much does it cost to fix code P2135 on a Jeep?
The repair cost can range from $150 to $500 or more, depending on whether cleaning, sensor replacement, or throttle body replacement is necessary.
Can a software issue cause P2135 on a Jeep?
Yes, in some cases, a software glitch or outdated ECM firmware can cause this code and may require a reflash or update.
How can I prevent code P2135 from occurring on my Jeep?
Regular throttle body cleanings, checking for damaged wiring, and ensuring connectors are secure can help prevent this issue.
Do I need a mechanic to fix P2135, or can I do it myself?
If you're comfortable with basic repairs, you may be able to clean the throttle body or replace sensors yourself. For wiring issues or throttle body replacement, professional help is recommended.
Discuss the causes and fixes for P2135 Jeep OBDII Code
Code P2135 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.