P2135 2018 GMC Sierra Code - Throttle Position Sensors 1-2 Not Plausible
Quick Answer
The P2135 diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates an issue with the throttle position sensors 1-2 not being in agreement or plausible. Common causes include Faulty throttle position sensors: The sensors themselves may be malfunctioning or out of calibration, leading to inconsistent readings, Wiring issues: Damaged or corroded wiring connections to the throttle position sensors can disrupt the signal transmission, ECU malfunction: A problem with the engine control unit (ECU) can also cause discrepancies in the throttle position sensor readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2135 2018 GMC Sierra indicates Throttle Position Sensors 1-2 Not Plausible.
- Common causes
- Common causes include Faulty throttle position sensors: The sensors themselves may be malfunctioning or out of calibration, leading to inconsistent readings, Wiring issues: Damaged or corroded wiring connections to the throttle position sensors can disrupt the signal transmission, ECU malfunction: A problem with the engine control unit (ECU) can also cause discrepancies in the throttle position sensor readings.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2135 2018 GMC Sierra Description
The P2135 diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates an issue with the throttle position sensors 1-2 not being in agreement or plausible. This means that the signals being received from the two throttle position sensors are not matching up, which can lead to various performance issues in the vehicle. The throttle position sensors are crucial components that monitor the position of the throttle pedal and relay this information to the engine control unit (ECU) to adjust the throttle opening accordingly. When these sensors are not providing consistent or accurate readings, it can result in improper fuel delivery, incorrect air-fuel mixture, and ultimately affect the engine performance and drivability of the vehicle.
Common Causes of P2135 2018 GMC Sierra
- Faulty throttle position sensors: The sensors themselves may be malfunctioning or out of calibration, leading to inconsistent readings.
- Wiring issues: Damaged or corroded wiring connections to the throttle position sensors can disrupt the signal transmission.
- ECU malfunction: A problem with the engine control unit (ECU) can also cause discrepancies in the throttle position sensor readings.
- Throttle body issues: A dirty or malfunctioning throttle body can impact the performance of the throttle position sensors.
- Electronic throttle control system problems: Issues with the electronic throttle control system, such as throttle body alignment or calibration, can trigger this code.
Symptoms of P2135 2018 GMC Sierra
- Reduced engine power or acceleration: The vehicle may experience a noticeable lack of power or sluggish acceleration due to the inaccurate throttle position readings.
- Check Engine Light: The check engine light may illuminate on the dashboard to indicate a problem with the throttle position sensors.
- Rough idling or stalling: Inconsistent throttle position readings can lead to rough idling or even stalling of the engine.
- Poor fuel economy: Incorrect throttle position readings can result in inefficient fuel delivery, leading to decreased fuel economy.
- Harsh shifting: The transmission may exhibit harsh or erratic shifting patterns due to the inaccurate throttle position signals.
How to Fix P2135 2018 GMC Sierra
- Diagnose the issue: Use a diagnostic scanner to retrieve the trouble codes and perform a thorough inspection of the throttle position sensors, wiring, and related components.
- Replace faulty sensors: If the throttle position sensors are found to be faulty, replace them with new, OEM-equivalent sensors.
- Check wiring connections: Inspect the wiring harness for any damage or corrosion, and repair or replace as necessary.
- Clean or replace throttle body: Clean the throttle body to ensure proper operation, or replace it if it is damaged or malfunctioning.
- Reset ECU: After completing the repairs, reset the engine control unit (ECU) to clear the trouble codes and recalibrate the throttle position sensors.
Cost to Fix P2135 2018 GMC Sierra
The cost of repairing a P2135 code on a 2018 GMC Sierra can vary depending on the specific cause of the issue and the parts and labor rates at the repair shop. In general, replacing faulty throttle position sensors can cost between $100 and $200 per sensor, while cleaning or replacing the throttle body may range from $150 to $300. The total repair cost for resolving a P2135 code could be around $300 to $600 including parts and labor. However, it's important to note that the actual costs may differ based on the location, vehicle make and model, and the specific repair shop rates. It's recommended to obtain quotes from local auto repair shops for a more accurate estimate.
Need more information about the P2135 2018 GMC Sierra code?
Need more information on how to fix the P2135 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2135 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2135 2018 GMC Sierra Code
What does the OBDII code P2135 mean on a 2018 GMC Sierra?
The code P2135 indicates a discrepancy between the readings of Throttle Position Sensor 1 and Sensor 2, suggesting they are not providing plausible data to the engine control module.
What are the symptoms of code P2135 on a 2018 GMC Sierra?
Common symptoms include reduced engine power mode, poor acceleration, hesitation, and possible stalling.
What causes code P2135 on a 2018 GMC Sierra?
The code can be caused by a faulty throttle position sensor, wiring issues, connector problems, or a malfunctioning throttle body.
Can I drive my 2018 GMC Sierra with the P2135 code?
Driving with this code is not recommended as it can lead to reduced engine performance and safety risks due to sudden loss of power.
How do I fix code P2135 on a 2018 GMC Sierra?
Repair may involve inspecting and replacing the throttle position sensors, checking the throttle body, and addressing any wiring or connector issues.
How do I diagnose the P2135 code on a 2018 GMC Sierra?
Diagnosis involves using a scan tool to monitor sensor readings, visually inspecting the wiring and connectors, and testing the throttle position sensors for proper functionality.
Does the throttle body need to be replaced for code P2135?
Not always. The throttle body may need replacement only if the sensors or internal mechanisms are faulty and cannot be repaired.
Can cleaning the throttle body resolve the P2135 code?
Yes, if carbon buildup or debris is causing sensor interference or movement issues, cleaning the throttle body might resolve the code.
How much does it cost to fix code P2135 on a 2018 GMC Sierra?
The repair cost varies but typically ranges from $200 to $600, depending on whether the throttle position sensors or throttle body needs replacement.
What happens if I ignore the P2135 code on my GMC Sierra?
Ignoring the code can lead to further engine performance issues, potential stalling, and reduced fuel efficiency, compromising safety and reliability.
Discuss the causes and fixes for P2135 2018 GMC Sierra OBDII Code
Code P2135 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.