P2135 2017 Toyota RAV4 Code - Throttle / Pedal Position Sensor / Switch 'A' / 'B' Voltage Correlation
Quick Answer
The P2135 diagnostic trouble code (DTC) for a 2017 Toyota RAV4 indicates a malfunction in the Throttle / Pedal Position Sensor / Switch 'A' / 'B' Voltage Correlation. Common causes include Faulty throttle position sensor, Malfunctioning accelerator pedal position sensor, Wiring or connection issues between sensors and ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2135 2017 Toyota RAV4 indicates Throttle / Pedal Position Sensor / Switch 'A' / 'B' Voltage Correlation.
- Common causes
- Common causes include Faulty throttle position sensor, Malfunctioning accelerator pedal position sensor, Wiring or connection issues between sensors and ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2135 2017 Toyota RAV4 Description
The P2135 diagnostic trouble code (DTC) for a 2017 Toyota RAV4 indicates a malfunction in the Throttle / Pedal Position Sensor / Switch 'A' / 'B' Voltage Correlation. This code is triggered when the Engine Control Module (ECM) detects a discrepancy in the voltage signals between the throttle position sensor and the accelerator pedal position sensor. Both sensors play a crucial role in the operation of the electronic throttle control system, which regulates the amount of air entering the engine, thus controlling acceleration.
Common Causes of P2135 2017 Toyota RAV4
- Faulty throttle position sensor.
- Malfunctioning accelerator pedal position sensor.
- Wiring or connection issues between sensors and ECM.
- ECM software or hardware problems.
- Environmental factors such as moisture or corrosion affecting sensor performance.
Symptoms of P2135 2017 Toyota RAV4
- Loss of power or acceleration.
- Engine stalling or rough idling.
- Unresponsive throttle response.
- Check Engine Light illuminated.
- Reduced fuel efficiency.
How to Fix P2135 2017 Toyota RAV4
- Begin by conducting a thorough inspection of the throttle position sensor and accelerator pedal position sensor for any signs of damage or wear.
- Test the voltage output of both sensors using a multimeter to determine if they are within the manufacturer's specifications.
- Check the wiring harness and connectors for any breaks, corrosion, or loose connections that could be causing the voltage discrepancy.
- If necessary, replace the faulty sensor(s) or repair any damaged wiring to restore proper voltage correlation.
- Clear the DTC with a scan tool and perform a test drive to ensure that the issue has been resolved.
Cost to Fix P2135 2017 Toyota RAV4
The typical repair costs for addressing the P2135 code on a 2017 Toyota RAV4 can range from $200 to $500, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging between $80 and $150. Rates may be higher at dealerships or in metropolitan areas, while independent shops may offer more affordable options. To obtain an accurate estimate, it is recommended to consult with local auto repair shops.
Need more information about the P2135 2017 Toyota RAV4 code?
Need more information on how to fix the P2135 2017 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2135 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2135 2017 Toyota RAV4 Code
1. What are common symptoms of OBDII code P2135 in a 2017 Toyota RAV4?
The common symptoms of code P2135 in a Toyota RAV4 may include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.
2. What does OBDII code P2135 indicate in a 2017 Toyota RAV4?
Code P2135 in a 2017 Toyota RAV4 indicates a Throttle/Pedal Position Sensor/Switch 'A'/'B' Voltage Correlation issue, meaning there is a discrepancy between the signals from these sensors.
3. What are the possible causes of OBDII code P2135 in a 2017 Toyota RAV4?
Possible causes of code P2135 in a Toyota RAV4 include a faulty throttle position sensor, problems with the pedal position sensor, wiring issues, or a malfunctioning electronic throttle control system.
4. How can I diagnose OBDII code P2135 in my 2017 Toyota RAV4?
Diagnosing code P2135 involves checking the throttle and pedal position sensor readings with a scan tool, inspecting the wiring for any damage or loose connections, and testing the electronic throttle control system for proper operation.
5. Can I still drive my 2017 Toyota RAV4 with OBDII code P2135?
It is not recommended to drive your Toyota RAV4 with code P2135 as it can lead to unsafe driving conditions due to reduced engine power or potential stalling. It's best to address the issue promptly.
6. How can I repair OBDII code P2135 on my 2017 Toyota RAV4?
Repairing code P2135 may involve replacing the faulty throttle or pedal position sensor, repairing any damaged wiring, or addressing issues with the electronic throttle control system as needed.
7. Will resetting the OBDII code P2135 in my 2017 Toyota RAV4 make it go away permanently?
Simply resetting the code may temporarily clear the Check Engine Light, but if the underlying issue causing code P2135 is not fixed, the code is likely to return. It's essential to diagnose and address the root cause.
8. Is it necessary to visit a mechanic for OBDII code P2135 in a 2017 Toyota RAV4?
While some DIY enthusiasts may diagnose and repair code P2135 themselves, it's recommended to consult a qualified mechanic for accurate diagnosis and proper resolution of the issue to avoid further complications.
9. How much does it cost to fix OBDII code P2135 in a 2017 Toyota RAV4?
The cost of fixing code P2135 in a Toyota RAV4 can vary depending on the exact cause of the issue, the labor rates in your area, and whether you choose to use genuine Toyota parts or aftermarket alternatives.
10. Can a bad throttle position sensor cause OBDII code P2135 in a 2017 Toyota RAV4?
Yes, a malfunctioning throttle position sensor can indeed cause code P2135 in a 2017 Toyota RAV4 as it plays a crucial role in providing accurate throttle position data to the engine control module.
Discuss the causes and fixes for P2135 2017 Toyota RAV4 OBDII Code
Code P2135 2017 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.