P2135 2012 Nissan Altima Sedan Code - Throttle Position Sensor Circuit Range/Performance
Quick Answer
The P2135 code for a 2012 Nissan Altima Sedan indicates a problem with the Throttle Position Sensor (TPS) circuit. Common causes include Faulty TPS sensor, Damaged wiring or connectors, Issues with the ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2135 2012 Nissan Altima Sedan indicates Throttle Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty TPS sensor, Damaged wiring or connectors, Issues with the ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2135 2012 Nissan Altima Sedan Description
The P2135 code for a 2012 Nissan Altima Sedan indicates a problem with the Throttle Position Sensor (TPS) circuit. The TPS is a crucial component that monitors the position of the throttle valve in the engine. It sends this information to the engine control module (ECM) to adjust fuel delivery and air intake accordingly. When the TPS circuit is out of range or not performing as expected, it can cause issues with the vehicle's performance and overall drivability.
Common Causes of P2135 2012 Nissan Altima Sedan
- Faulty TPS sensor
- Damaged wiring or connectors
- Issues with the ECM
- Corrosion or contamination in the sensor connections
- Throttle plate sticking or binding
Symptoms of P2135 2012 Nissan Altima Sedan
- Reduced engine power
- Difficulty accelerating
- Rough idling
- Stalling
- Limp mode activation
How to Fix P2135 2012 Nissan Altima Sedan
- Begin by checking the TPS sensor for any visible damage or wear. Replace the sensor if necessary.
- Inspect the wiring and connectors for any signs of damage or corrosion. Repair or replace as needed.
- Reset the ECM to clear the code and see if the issue persists.
- Test the TPS sensor using a multimeter to ensure it is functioning within the specified range.
- If the problem persists, consider consulting a professional mechanic for further diagnostics and potential ECM replacement.
Cost to Fix P2135 2012 Nissan Altima Sedan
The cost of repairing a P2135 code on a 2012 Nissan Altima Sedan can vary depending on the extent of the issue and the specific parts that need to be replaced. On average, the repair could cost between $100 to $300 for parts and labor. However, it's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's advisable to check local rates for a more accurate estimate.
When is the Code Detected?
Need more information about the P2135 2012 Nissan Altima Sedan code?
Need more information on how to fix the P2135 2012 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2135 2012 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2135 2012 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P2135 on a 2012 Nissan Altima Sedan?
- Common symptoms include a decrease in engine power, acceleration issues, rough idling, and potential stalling of the vehicle.
2. What does the OBDII code P2135 indicate in a 2012 Nissan Altima Sedan?
- The P2135 code specifically points to a problem with the throttle position sensor circuit range/performance in the vehicle.
3. What are the possible causes of the P2135 code on a 2012 Nissan Altima Sedan?
- Potential causes include a faulty throttle position sensor, issues with the throttle body, wiring problems, or a malfunctioning electronic control module (ECM).
4. How can I diagnose the P2135 code on my 2012 Nissan Altima Sedan?
- Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the throttle position sensor and its wiring, and checking for any visible signs of damage.
5. Can I continue driving my 2012 Nissan Altima Sedan with the P2135 code?
- It is not recommended to drive the vehicle with the P2135 code active, as it can lead to further damage and potential safety hazards due to erratic throttle response.
6. How can I repair the P2135 code on my 2012 Nissan Altima Sedan?
- Repair options may include replacing the throttle position sensor, repairing or replacing damaged wiring, cleaning the throttle body, or reprogramming the ECM.
7. Is it necessary to reset the OBDII code P2135 after repairs on a 2012 Nissan Altima Sedan?
- Yes, it is important to reset the code using an OBDII scanner after performing any repairs to clear the fault code and reset the vehicle's system for accurate monitoring.
8. Are there any preventive measures to avoid the P2135 code on a 2012 Nissan Altima Sedan?
- Regular maintenance, such as cleaning the throttle body and checking the wiring connections, can help prevent issues with the throttle position sensor and potentially avoid the P2135 code.
9. Can a DIY enthusiast resolve the P2135 code issue on a 2012 Nissan Altima Sedan?
- Depending on the skill level and tools available, some DIY enthusiasts may be able to address the P2135 code by following repair guides or tutorials, but professional help is recommended for accurate diagnosis and repair.
10. How much does it typically cost to repair the P2135 code on a 2012 Nissan Altima Sedan?
- The cost of repairs for the P2135 code can vary depending on the specific issue, but it may range from $100 to $500, including parts and labor, if professional assistance is required.
Discuss the causes and fixes for P2135 2012 Nissan Altima Sedan OBDII Code
Code P2135 2012 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.