P2135 2011 Nissan Rogue Code - Throttle Position Sensor Circuit Range/Performance
Quick Answer
The P2135 diagnostic trouble code (DTC) in a 2011 Nissan Rogue indicates a problem with the Throttle Position Sensor (TPS) circuit. Common causes include Faulty TPS sensor: The throttle position sensor itself may be malfunctioning, causing the circuit to operate outside the specified range, Wiring issues: Damaged or corroded wiring connections between the TPS sensor and ECM can disrupt the signal transmission, ECM communication errors: Problems with the engine control module communicating with the TPS sensor can trigger the P2135 code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2135 2011 Nissan Rogue indicates Throttle Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty TPS sensor: The throttle position sensor itself may be malfunctioning, causing the circuit to operate outside the specified range, Wiring issues: Damaged or corroded wiring connections between the TPS sensor and ECM can disrupt the signal transmission, ECM communication errors: Problems with the engine control module communicating with the TPS sensor can trigger the P2135 code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2135 2011 Nissan Rogue Description
The P2135 diagnostic trouble code (DTC) in a 2011 Nissan Rogue indicates a problem with the Throttle Position Sensor (TPS) circuit. The TPS is a crucial component of the electronic throttle control system, responsible for monitoring the position of the throttle pedal and sending this information to the engine control module (ECM). The ECM uses this data to determine the appropriate amount of air and fuel to deliver to the engine for optimal performance.
Common Causes of P2135 2011 Nissan Rogue
- Faulty TPS sensor: The throttle position sensor itself may be malfunctioning, causing the circuit to operate outside the specified range.
- Wiring issues: Damaged or corroded wiring connections between the TPS sensor and ECM can disrupt the signal transmission.
- ECM communication errors: Problems with the engine control module communicating with the TPS sensor can trigger the P2135 code.
- Throttle body issues: A dirty or faulty throttle body can affect the TPS sensor's performance and lead to circuit range/performance problems.
- Environmental factors: Extreme temperatures or moisture exposure can also impact the TPS circuit's functionality.
Symptoms of P2135 2011 Nissan Rogue
- Reduced engine power: The vehicle may experience a loss of power or acceleration due to the TPS circuit issue.
- Rough idling: The engine may idle erratically or stall when the throttle position sensor is not functioning correctly.
- Check Engine Light: The illumination of the Check Engine Light is a common symptom associated with the P2135 code.
- Poor fuel efficiency: The vehicle may consume more fuel than usual, leading to decreased mileage.
- Unresponsive throttle: The throttle response may be sluggish or unresponsive, affecting the vehicle's drivability.
How to Fix P2135 2011 Nissan Rogue
- Diagnose the issue: Use a diagnostic scanner to retrieve the trouble codes and perform a thorough inspection of the TPS sensor, wiring, and related components.
- Replace the TPS sensor: If the sensor is found to be faulty, replace it with a new one following the manufacturer's guidelines.
- Check wiring connections: Inspect the wiring harness for any damage or corrosion, repairing or replacing as necessary.
- Reset the ECM: Clear the trouble codes and reset the ECM to ensure proper communication with the new TPS sensor.
- Test drive and recheck: After the repair, test drive the vehicle to verify that the issue has been resolved and recheck for any remaining trouble codes.
Cost to Fix P2135 2011 Nissan Rogue
The typical repair costs for addressing a P2135 code in a 2011 Nissan Rogue can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. Factors such as location, vehicle make and model, and engine type can also influence the overall repair costs. For a more accurate estimate, it's recommended to consult with local auto repair shops or dealerships.
Tech Notes for P2135 2011 Nissan Rogue
Nissan Rogue Idle Air Volume Relearn
When is the Code Detected?
Need more information about the P2135 2011 Nissan Rogue code?
Need more information on how to fix the P2135 2011 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2135 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2135 2011 Nissan Rogue Code
1. What does the OBDII code P2135 on my 2011 Nissan Rogue indicate?
The P2135 code points to a Throttle Position Sensor Circuit Range/Performance issue.
2. What are the common symptoms of a P2135 code in a Nissan Rogue?
Common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.
3. What are the possible causes of the P2135 code in a 2011 Nissan Rogue?
Common causes of the P2135 code include a faulty throttle position sensor, issues with the throttle body, wiring or connector problems, or a damaged accelerator pedal position sensor.
4. How can I diagnose the P2135 code in my Nissan Rogue?
Diagnosing the P2135 code involves checking the throttle position sensor's voltage, inspecting the wiring and connectors for damage, and scanning for any other related trouble codes.
5. Can I still drive my Nissan Rogue with a P2135 code?
It is not recommended to drive your vehicle with a P2135 code, as it can lead to unsafe driving conditions and potential further damage to the engine.
6. How can I repair a P2135 code on my 2011 Nissan Rogue?
Repairing a P2135 code may involve replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, cleaning the throttle body, or resetting the throttle position sensor.
7. Is it necessary to reset the ECU after fixing a P2135 code on a Nissan Rogue?
Yes, it is recommended to reset the ECU after fixing a P2135 code to clear any stored error codes and ensure the system recalibrates properly.
8. Can a dirty throttle body cause a P2135 code in a Nissan Rogue?
Yes, a dirty throttle body can disrupt the airflow and cause erratic sensor readings, potentially triggering a P2135 code.
9. How much does it typically cost to repair a P2135 code on a 2011 Nissan Rogue?
The cost of repairing a P2135 code can vary depending on the specific issue, but it may range from $100 to $500, including parts and labor.
10. How long does it take to repair a P2135 code on a Nissan Rogue?
The repair time for a P2135 code can vary based on the exact cause, but it typically takes around 1 to 2 hours for a professional mechanic to diagnose and fix the issue.
Discuss the causes and fixes for P2135 2011 Nissan Rogue OBDII Code
Code P2135 2011 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.