Engine-CodesNissan – P2135 2010 Nissan Rogue

P2135 2010 Nissan Rogue Code - Throttle Position Sensor Circuit Range/Performance

Quick Answer

The P2135 code on a 2010 Nissan Rogue indicates a problem with the throttle position sensor (TPS) circuit. Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the TPS circuit, Corrosion or poor electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2135 2010 Nissan Rogue indicates Throttle Position Sensor Circuit Range/Performance.
Common causes
Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the TPS circuit, Corrosion or poor electrical connections.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 11, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2135 2010 Nissan Rogue Description

The P2135 code on a 2010 Nissan Rogue indicates a problem with the throttle position sensor (TPS) circuit. The TPS is a crucial component of the vehicle's electronic throttle control system, which regulates the amount of air entering the engine. The TPS monitors the position of the throttle valve and sends this information to the engine control module (ECM), allowing the ECM to adjust fuel delivery and ignition timing accordingly.

OBDII Code P2135 2010 Nissan Rogue - Throttle Position Sensor Circuit Range/Performance
P2135 2010 Nissan Rogue Code - Throttle Position Sensor Circuit Range/Performance

Common Causes of P2135 2010 Nissan Rogue

  1. Faulty throttle position sensor
  2. Damaged wiring or connectors in the TPS circuit
  3. Corrosion or poor electrical connections
  4. Issues with the ECM communication
  5. Mechanical issues with the throttle body

Symptoms of P2135 2010 Nissan Rogue

  1. Rough idling or engine stalling
  2. Lack of responsiveness when accelerating
  3. Reduced fuel efficiency
  4. Illumination of the Check Engine Light
  5. Limp mode activation

How to Fix P2135 2010 Nissan Rogue

  1. Use an OBD-II scanner to retrieve the code and confirm the P2135 diagnosis.
  2. Inspect the throttle position sensor and its wiring for any visible damage or corrosion.
  3. Test the TPS using a multimeter to check for proper voltage output.
  4. Replace the throttle position sensor if it is faulty, ensuring proper installation and calibration.
  5. Clear the diagnostic trouble codes and test drive the vehicle to verify that the issue has been resolved.

Cost to Fix P2135 2010 Nissan Rogue

The typical repair costs for addressing a P2135 code on a 2010 Nissan Rogue can range from $150 to $400, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check local rates for a more precise estimate. Auto repair shops commonly charge between $80 and $150 per hour, with rates potentially higher in metropolitan areas or at dealerships, and lower at independent shops.

Tech Notes for P2135 2010 Nissan Rogue

Try to clean the throttle body, adjust engine idle and erase engine code. If the code comes back you may have to replace the Electric Throttle Control Actuator (Motor) to repair the problem.



Nissan Rogue Idle Air Volume Relearn

When is the Code Detected?

The code P2135 is set when the and incorrect voltage is sent to the Engine Control Module (ECM) compared with the signals from Throttle Position (TP) sensor 1 and Throttle Position (TP) sensor 2

Need more information about the P2135 2010 Nissan Rogue code?

Need more information on how to fix the P2135 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2135 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2135 2010 Nissan Rogue Code

1. What are the common symptoms of OBDII code P2135 in a 2010 Nissan Rogue?

- Common symptoms include issues with acceleration, reduced engine power, stalling, and the vehicle going into limp mode.

2. What does the OBDII code P2135 indicate in a 2010 Nissan Rogue?

- P2135 indicates a problem with the Throttle Position Sensor (TPS) circuit range or performance in the 2010 Nissan Rogue.

3. What are the possible causes of OBDII code P2135 in a 2010 Nissan Rogue?

- Potential causes include a faulty TPS, damaged wiring or connectors in the TPS circuit, a dirty throttle body, or issues with the electronic throttle control system.

4. How can I diagnose the OBDII code P2135 in my 2010 Nissan Rogue?

- Proper diagnosis involves checking the TPS for proper voltage signals, inspecting wiring for damage, and scanning the vehicle's computer for related trouble codes.

5. Can I drive my 2010 Nissan Rogue with OBDII code P2135?

- It is not recommended to drive with P2135 as it can lead to unsafe driving conditions and potential damage to the vehicle. Seek professional diagnosis and repair.

6. How can I repair OBDII code P2135 in my 2010 Nissan Rogue?

- Repair options may include replacing the TPS, repairing damaged wiring or connectors, cleaning the throttle body, or addressing issues with the electronic throttle control system.

7. Will resetting the OBDII code P2135 in my 2010 Nissan Rogue fix the issue?

- Resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing P2135. Proper diagnosis and repair are necessary.

8. Is it possible to prevent OBDII code P2135 in a 2010 Nissan Rogue?

- Regular maintenance, such as cleaning the throttle body and checking TPS connections, can help prevent issues leading to code P2135 in a 2010 Nissan Rogue.

9. How much does it cost to repair OBDII code P2135 in a 2010 Nissan Rogue?

- The cost of repair can vary depending on the specific issue causing P2135. Costs may include parts and labor for TPS replacement, wiring repairs, or throttle body cleaning.

10. Can a DIY enthusiast fix OBDII code P2135 in a 2010 Nissan Rogue?

- While some simple tasks like cleaning the throttle body may be DIY-friendly, diagnosing and repairing complex issues related to P2135 may require professional expertise and tools.

Discuss the causes and fixes for P2135 2010 Nissan Rogue OBDII Code

Code P2135 2010 Nissan Rogue comments

No comments found for this page.