Engine-Codes - Nissan - P2135 2010 NISSAN PATHFINDER

P2135 2010 NISSAN PATHFINDER - Throttle Position Sensor Circuit Range/Performance

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What is this?
Table of contents

P2135 2010 NISSAN PATHFINDER Possible Causes

  • Faulty Electric Throttle Control Actuator (TP sensor 1 and 2)
  • Electric Throttle Control Actuator harness is open or shorted
  • Electric Throttle Control Actuator circuit poor connection
  • Faulty Accelerator Pedal Position Sensor

How is the P2135 2010 NISSAN PATHFINDER code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

What is the cost to diagnose the P2135 2010 NISSAN PATHFINDER code

Labor: 1.0

The cost to diagnose the P2135 2010 NISSAN PATHFINDER code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
How much do you know about cars?

Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge

Play Now

When is the code detected?

The code P2135 is set when the and incorrect voltage is sent to the Engine Control Module (ECM) compared with the signals from Throttle Position (TP) sensor 1 and Throttle Position (TP) sensor 2

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P2135 2010 NISSAN PATHFINDER Meaning

Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor, etc. The throttle position sensor responds to the throttle valve movement.

The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.

More Information

Need more information on how to fix the P2135 2010 NISSAN PATHFINDER code?
Get Access to Factory Service Manuals

Need more help?

Get the P2135 2010 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area