Engine-Codes.com
Engine-Codes – Nissan – P2135 2008 Nissan Rogue

P2135 2008 Nissan Rogue Code - Throttle Position Sensor Circuit Range/Performance

Quick Answer

The P2135 diagnostic trouble code (DTC) in a 2008 Nissan Rogue indicates a problem with the Throttle Position Sensor (TPS) circuit. Common causes include Worn or damaged TPS sensor, Corroded or loose wiring/connectors in the TPS circuit, Faulty ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2135 2008 Nissan Rogue indicates Throttle Position Sensor Circuit Range/Performance.
Common causes
Common causes include Worn or damaged TPS sensor, Corroded or loose wiring/connectors in the TPS circuit, Faulty ECM.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2135 2008 Nissan Rogue Description

The P2135 diagnostic trouble code (DTC) in a 2008 Nissan Rogue indicates a problem with the Throttle Position Sensor (TPS) circuit. The TPS is a crucial component of the vehicle's electronic throttle control system, responsible for monitoring the position of the throttle pedal and sending signals to the engine control module (ECM) to adjust the throttle opening accordingly. When the ECM detects that the TPS circuit is operating outside the expected range or performance parameters, it triggers the P2135 code.

OBDII Code P2135 2008 Nissan Rogue - Throttle Position Sensor Circuit Range/Performance
P2135 2008 Nissan Rogue Code - Throttle Position Sensor Circuit Range/Performance

Common Causes of P2135 2008 Nissan Rogue

  1. Worn or damaged TPS sensor
  2. Corroded or loose wiring/connectors in the TPS circuit
  3. Faulty ECM
  4. Throttle body issues
  5. Water or debris intrusion in the TPS sensor

Symptoms of P2135 2008 Nissan Rogue

  1. Erratic throttle response
  2. Poor acceleration
  3. Stalling or rough idling
  4. Reduced fuel efficiency
  5. Limp mode activation

How to Fix P2135 2008 Nissan Rogue

  1. Begin by conducting a thorough inspection of the TPS sensor, wiring, and connectors for any visible damage or corrosion.
  2. Use a multimeter to test the TPS sensor's resistance and voltage output to determine if it is functioning within specifications.
  3. If the TPS sensor is faulty, replace it with a new one following the manufacturer's guidelines.
  4. Check and repair any damaged wiring or connectors in the TPS circuit.
  5. Clear the DTC codes with a scan tool and perform a test drive to ensure the issue has been resolved.

Cost to Fix P2135 2008 Nissan Rogue

The typical repair costs for addressing a P2135 code in a 2008 Nissan Rogue can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate. Additionally, rates may be higher at dealerships or in metropolitan areas, while independent shops often offer more competitive pricing.

What does this mean?

Tech Notes for P2135 2008 Nissan Rogue

Try to clean the throttle body, adjust engine idle and erase engine code. If the code comes back you may have to replace the Electric Throttle Control Actuator (Motor) to repair the problem.



Nissan Rogue Idle Air Volume Relearn

When is the Code Detected?

The code P2135 is set when the and incorrect voltage is sent to the Engine Control Module (ECM) compared with the signals from Throttle Position (TP) sensor 1 and Throttle Position (TP) sensor 2

Need more information about the P2135 2008 Nissan Rogue code?

Need more information on how to fix the P2135 2008 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2135 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2135 2008 Nissan Rogue Code

1. What does the OBDII code P2135 for a 2008 Nissan Rogue indicate?

The code P2135 indicates a Throttle Position Sensor Circuit Range/Performance issue in the 2008 Nissan Rogue.

2. What are common symptoms of a P2135 code in a 2008 Nissan Rogue?

Common symptoms of a P2135 code include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.

3. What are possible causes of the P2135 code in a 2008 Nissan Rogue?

Possible causes of the P2135 code include a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or a problem with the electronic throttle control system.

4. How can I diagnose the P2135 code on a 2008 Nissan Rogue?

Diagnosing the P2135 code typically involves using an OBDII scanner to read the code, checking the throttle position sensor's voltage readings, inspecting the wiring and connectors for damage, and testing the electronic throttle control system.

5. Can I drive my 2008 Nissan Rogue with a P2135 code?

It is not recommended to drive your 2008 Nissan Rogue with a P2135 code, as it can lead to potential safety hazards and further damage to the vehicle if left unresolved.

6. How can I repair a P2135 code on a 2008 Nissan Rogue?

Repairing a P2135 code may involve replacing the throttle position sensor, repairing any damaged wiring or connectors, or recalibrating the electronic throttle control system as per manufacturer's instructions.

7. Is it possible to reset the P2135 code on a 2008 Nissan Rogue without fixing the underlying issue?

While you can clear the code with an OBDII scanner, it is not recommended to reset the P2135 code without addressing the root cause, as the issue may persist and potentially worsen over time.

8. Are there any maintenance tips to prevent the P2135 code in a 2008 Nissan Rogue?

Regularly inspecting and maintaining the throttle position sensor, wiring, and connectors, as well as following the manufacturer's recommended maintenance schedule, can help prevent issues leading to the P2135 code.

9. How much does it cost to repair a P2135 code on a 2008 Nissan Rogue?

The cost of repairing a P2135 code can vary depending on the specific issue and the labor rates of the repair shop. It is recommended to get a diagnostic assessment to determine the exact repair cost.

10. Can a DIY enthusiast fix a P2135 code on a 2008 Nissan Rogue?

While some aspects of diagnosing and repairing the P2135 code can be done by a DIY enthusiast, working with electronic throttle control systems and sensors may require specialized tools and expertise, so it's advisable to consult a professional mechanic for complex issues.

Discuss the causes and fixes for P2135 2008 Nissan Rogue OBDII Code

Submit a New Comment

Code P2135 2008 Nissan Rogue comments

No comments found for this page.