P2135 2007 Toyota Highlander Code - Throttle/Pedal Position Sensor/Switch 'A'/'B' Voltage Correlation
Quick Answer
The P2135 diagnostic trouble code (DTC) for a 2007 Toyota Highlander indicates a problem with the Throttle/Pedal Position Sensor/Switch 'A'/'B' Voltage Correlation. Common causes include Faulty throttle position sensor, Faulty pedal position sensor, Damaged wiring or connectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2135 2007 Toyota Highlander indicates Throttle/Pedal Position Sensor/Switch 'A'/'B' Voltage Correlation.
- Common causes
- Common causes include Faulty throttle position sensor, Faulty pedal position sensor, Damaged wiring or connectors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2135 2007 Toyota Highlander Description
The P2135 diagnostic trouble code (DTC) for a 2007 Toyota Highlander indicates a problem with the Throttle/Pedal Position Sensor/Switch 'A'/'B' Voltage Correlation. This code is triggered when the Engine Control Module (ECM) detects that the voltage signals from the throttle position sensor (TPS) and the pedal position sensor (PPS) do not correlate as they should. The TPS is responsible for monitoring the position of the throttle valve, while the PPS detects the position of the accelerator pedal. When these sensors do not provide consistent voltage readings, it can lead to issues with engine performance, fuel efficiency, and overall drivability.
Common Causes of P2135 2007 Toyota Highlander
- Faulty throttle position sensor
- Faulty pedal position sensor
- Damaged wiring or connectors
- Water intrusion into sensor connectors
- ECM malfunction
Symptoms of P2135 2007 Toyota Highlander
- Reduced power output
- Hesitation during acceleration
- Rough idling
- Stalling
- Limp mode activation
How to Fix P2135 2007 Toyota Highlander
- Begin by conducting a thorough inspection of the throttle position sensor, pedal position sensor, wiring harness, and connectors for any visible damage or corrosion.
- Use a multimeter to test the voltage output of the TPS and PPS to ensure they are within the manufacturer's specified range.
- If either sensor is found to be faulty, replace it with a new, OEM-quality sensor.
- Check and repair any damaged wiring or connectors as needed.
- Clear the DTC using a scan tool and perform a test drive to verify that the issue has been resolved.
Cost to Fix P2135 2007 Toyota Highlander
The typical repair costs for addressing a P2135 code on a 2007 Toyota Highlander can vary depending on the specific cause of the issue. In general, replacing a faulty throttle position sensor or pedal position sensor can range from $100 to $200 each, not including labor costs. The total repair cost, including parts and labor, may range from $200 to $500. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.
Need more information about the P2135 2007 Toyota Highlander code?
Need more information on how to fix the P2135 2007 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2135 2007 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2135 2007 Toyota Highlander Code
1. What does OBDII code P2135 mean for a 2007 Toyota Highlander?
The P2135 code indicates a Throttle/Pedal Position Sensor/Switch 'A'/'B' Voltage Correlation issue in the electronic throttle control system.
2. What are the common symptoms of a P2135 code in a 2007 Toyota Highlander?
Common symptoms include reduced engine power, hesitation or stalling while driving, and the vehicle going into limp mode.
3. What are the possible causes of a P2135 code in a 2007 Toyota Highlander?
Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the throttle pedal position circuit, or issues with the electronic throttle control system.
4. How can I diagnose a P2135 code in my 2007 Toyota Highlander?
Diagnosis typically involves using a scan tool to read the code, checking the throttle position sensor's voltage values, inspecting the wiring and connectors for damage, and testing the electronic throttle control system components.
5. Can I still drive my 2007 Toyota Highlander with a P2135 code?
It is not recommended to drive the vehicle with a P2135 code as it can lead to unsafe driving conditions and potential further damage to the engine or transmission.
6. How can I repair a P2135 code in my 2007 Toyota Highlander?
Repair options may include replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, or addressing any issues with the electronic throttle control system.
7. Will resetting the trouble codes make the P2135 code go away in a 2007 Toyota Highlander?
Resetting the trouble codes may temporarily clear the P2135 code, but if the underlying issue is not fixed, the code is likely to reappear.
8. How much does it cost to fix a P2135 code in a 2007 Toyota Highlander?
The cost of fixing a P2135 code can vary depending on the specific cause of the issue, but it may involve parts and labor costs for sensor replacement or wiring repairs.
9. Is it safe to continue driving my 2007 Toyota Highlander if the P2135 code comes on intermittently?
It is not recommended to continue driving if the code appears intermittently, as it could indicate an underlying issue that may worsen over time and lead to potential safety hazards.
10. Can a DIY enthusiast repair a P2135 code in a 2007 Toyota Highlander?
While some aspects of diagnosing and repairing a P2135 code may be possible for experienced DIY enthusiasts, it is recommended to consult a professional mechanic for proper diagnosis and repair to ensure safety and accuracy.
Discuss the causes and fixes for P2135 2007 Toyota Highlander OBDII Code
Code P2135 2007 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.