P2135 2004 TOYOTA PRIUS Code - Throttle/Pedal Position Sensor/Switch 'A'/'B' Voltage Correlation
|P2135 2004 TOYOTA PRIUS code possible causes
- Faulty electric throttle control actuator (TP sensor 1 and 2)
- Throttle Position Sensor harness is open or shorted
- Throttle Position Sensor circuit poor connection
- Faulty accelerator pedal position sensor
|How is the P2135 2004 TOYOTA PRIUS code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the P2135 2004 TOYOTA PRIUS code
Labor: 1.0The cost to diagnose the P2135 2004 TOYOTA PRIUS code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are P2135 2004 TOYOTA PRIUS code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is P2135 2004 TOYOTA PRIUS code meaning?Electric throttle control actuator consists of throttle control motor, throttle position sensor, etc. The throttle position sensor responds to the throttle valve movement.
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
|Need more information with the P2135 2004 TOYOTA PRIUS code?Need more information on how to fix the P2135 2004 TOYOTA PRIUS code?
Get Access to Factory Service Manuals