P2133 Dodge Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit High
Quick Answer
The P2133 diagnostic trouble code for Dodge vehicles indicates a problem with the Throttle/Pedal Position Sensor/Switch 'F' Circuit High. Common causes include Faulty throttle position sensor, Damaged pedal position sensor, Wiring or connector issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2133 Dodge indicates Throttle/Pedal Position Sensor/Switch 'F' Circuit High.
- Common causes
- Common causes include Faulty throttle position sensor, Damaged pedal position sensor, Wiring or connector issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2133 Dodge Description
The P2133 diagnostic trouble code for Dodge vehicles indicates a problem with the Throttle/Pedal Position Sensor/Switch 'F' Circuit High. This means that the electronic control module (ECM) has detected a higher than expected voltage signal coming from the throttle position sensor or pedal position sensor 'F'. These sensors are crucial for the ECM to determine the correct throttle opening and acceleration pedal position, which in turn affects the engine's performance and overall vehicle operation.
Common Causes of P2133 Dodge
- Faulty throttle position sensor
- Damaged pedal position sensor
- Wiring or connector issues
- Malfunctioning ECM
Symptoms of P2133 Dodge
- Reduced acceleration
- Rough idling
- Hesitation during acceleration
- Stalling
- Decreased fuel efficiency
How to Fix P2133 Dodge
- Perform a thorough diagnostic to identify the specific cause of the issue.
- Inspect the throttle position sensor and pedal position sensor for any damage or wear.
- Check the wiring and connectors for any signs of corrosion, damage, or loose connections.
- Test the ECM to ensure it is functioning correctly and communicating with the sensors properly.
- Replace any faulty components, such as sensors or wiring, and clear the code from the ECM to reset the system.
Cost to Fix P2133 Dodge
The typical repair costs for addressing a P2133 code can vary depending on the specific cause of the issue and the parts and labor required for the repair. In general, the cost of replacing a throttle position sensor or pedal position sensor can range from $100 to $300, including parts and labor. Additional costs may be incurred if wiring or connectors need to be replaced. It is important to consider that the diagnosis time and labor rates at auto repair shops can vary, so it is recommended to check local rates for a more accurate estimate.
Need more information about the P2133 Dodge code?
Need more information on how to fix the P2133 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2133 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2133 Dodge Code
1. What are the common symptoms of OBDII code P2133 in a Dodge vehicle?
- Common symptoms of P2133 include loss of power, hesitation or stalling when accelerating, and the vehicle going into limp mode.
2. What does the OBDII code P2133 for Dodge mean?
- The code P2133 indicates an issue with the Throttle/Pedal Position Sensor/Switch 'F' Circuit High, specifically related to a high voltage signal.
3. What are the possible causes of OBDII code P2133 in a Dodge?
- The most common causes of P2133 include a faulty throttle position sensor, a malfunctioning pedal position sensor, wiring issues, or a problem with the electronic throttle control system.
4. How can I diagnose the OBDII code P2133 in my Dodge?
- To diagnose P2133, you can use an OBDII scanner to retrieve the code and then inspect the throttle position sensor, pedal position sensor, and related wiring for any visible damage or irregularities.
5. Can I continue driving my Dodge with the OBDII code P2133?
- It is not recommended to drive your Dodge with the P2133 code present, as it can lead to unsafe driving conditions and potential further damage to the vehicle's components.
6. How can I repair OBDII code P2133 in my Dodge?
- Repairing P2133 may involve replacing the throttle position sensor, pedal position sensor, or repairing any damaged wiring or connections. It is recommended to consult a professional mechanic for accurate diagnosis and repair.
7. Can a dirty throttle body cause the OBDII code P2133 in a Dodge?
- Yes, a dirty or malfunctioning throttle body can sometimes trigger the P2133 code by causing irregular signals from the throttle position sensor.
8. Is OBDII code P2133 a common issue in Dodge vehicles?
- P2133 is not uncommon in Dodge vehicles, especially in models with electronic throttle control systems. Regular maintenance and inspection can help prevent this issue.
9. How much does it cost to fix OBDII code P2133 in a Dodge?
- The cost of fixing P2133 can vary depending on the exact cause of the issue, but it may range from $200 to $500 for parts and labor.
10. Can I reset the OBDII code P2133 in my Dodge by disconnecting the battery?
- While disconnecting the battery may temporarily clear the code, it is not a recommended method for fixing the underlying issue causing P2133. It is best to address the root cause of the problem to prevent it from recurring.
Discuss the causes and fixes for P2133 Dodge OBDII Code
Code P2133 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.