P2133 2012 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit High
Quick Answer
The P2133 diagnostic trouble code (DTC) for a 2012 Ford Fusion indicates an issue with the Throttle/Pedal Position Sensor/Switch 'F' Circuit being too high. Common causes include Faulty throttle position sensor, Faulty pedal position sensor, Wiring or connector issues in the throttle/pedal position sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2133 2012 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'F' Circuit High.
- Common causes
- Common causes include Faulty throttle position sensor, Faulty pedal position sensor, Wiring or connector issues in the throttle/pedal position sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2133 2012 Ford Fusion Description
The P2133 diagnostic trouble code (DTC) for a 2012 Ford Fusion indicates an issue with the Throttle/Pedal Position Sensor/Switch 'F' Circuit being too high. This code is specifically related to the throttle position sensor (TPS) and pedal position sensor, which are crucial components for the proper functioning of the vehicle's electronic throttle control system. The throttle position sensor monitors the position of the throttle valve, while the pedal position sensor detects the position of the accelerator pedal. The information from these sensors is used by the engine control module (ECM) to adjust the throttle opening and fuel delivery for optimal engine performance.
Common Causes of P2133 2012 Ford Fusion
- Faulty throttle position sensor
- Faulty pedal position sensor
- Wiring or connector issues in the throttle/pedal position sensor circuit
- Corrosion or contamination in the sensor connectors
- ECM software or hardware issues
Symptoms of P2133 2012 Ford Fusion
- Erratic throttle response
- Poor acceleration
- Stalling or hesitation during acceleration
- Limp mode activation
- Illumination of the Check Engine Light
How to Fix P2133 2012 Ford Fusion
- Begin by connecting a diagnostic scanner to the vehicle's OBD-II port to retrieve the specific trouble codes and confirm the presence of P2133.
- Inspect the throttle and pedal position sensors, as well as their wiring and connectors, for any visible damage, corrosion, or loose connections.
- Test the throttle and pedal position sensors using a multimeter to check for proper voltage output according to manufacturer specifications.
- If the sensors are found to be faulty, replace them with new, OEM-quality components.
- Clear the trouble codes from the ECM using the diagnostic scanner and perform a test drive to ensure the issue has been resolved.
Cost to Fix P2133 2012 Ford Fusion
The typical repair costs for addressing a P2133 code on a 2012 Ford Fusion can range from $200 to $500, depending on the specific cause of the issue and the cost of parts and labor in your area. It's important to note that diagnosis time and labor rates at auto repair shops can vary significantly, so it's advisable to obtain quotes from multiple sources to ensure you're getting a fair price. Additionally, factors such as the vehicle's make and model, engine type, and the location of the repair shop can all influence the final cost of the repair.
Need more information about the P2133 2012 Ford Fusion code?
Need more information on how to fix the P2133 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2133 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2133 2012 Ford Fusion Code
1. What are the common symptoms of OBDII code P2133 in a 2012 Ford Fusion?
- Common symptoms include reduced engine power, a sudden loss of throttle response, and the vehicle going into a limp mode.
2. What does the OBDII code P2133 'Throttle/Pedal Position Sensor/Switch 'F' Circuit High' indicate in a 2012 Ford Fusion?
- This code indicates that there is a high voltage condition detected in the circuit related to the throttle or pedal position sensor/switch 'F'.
3. What are the possible causes of OBDII code P2133 in a 2012 Ford Fusion?
- The possible causes include a faulty throttle position sensor, a malfunctioning pedal position sensor, wiring issues, or a problem with the electronic throttle control system.
4. How can I diagnose the cause of OBDII code P2133 in my 2012 Ford Fusion?
- A thorough inspection of the throttle position sensor, pedal position sensor, and related wiring is recommended. Using a multimeter to test the voltage and resistance can help pinpoint the issue.
5. Is it safe to continue driving with OBDII code P2133 illuminated in a 2012 Ford Fusion?
- It is not recommended to drive the vehicle with this code active, as it can lead to unsafe driving conditions due to the potential loss of throttle control.
6. Can I reset the OBDII code P2133 in my 2012 Ford Fusion myself?
- While you can clear the code with an OBDII scanner, it is crucial to address the underlying issue causing the code to prevent it from reoccurring.
7. How much does it typically cost to repair OBDII code P2133 in a 2012 Ford Fusion?
- The cost of repairs can vary depending on the exact cause of the issue, but it may involve replacing the throttle position sensor, pedal position sensor, or repairing wiring, with costs ranging from $100 to $300 or more.
8. Are there any DIY repair tips for fixing OBDII code P2133 in a 2012 Ford Fusion?
- DIYers with automotive experience can attempt to replace the throttle position sensor or pedal position sensor themselves, following manufacturer guidelines and using the right tools.
9. Will OBDII code P2133 cause my 2012 Ford Fusion to fail an emissions test?
- Yes, this code can cause your vehicle to fail an emissions test, as it indicates a problem with the throttle or pedal position sensor, affecting engine performance.
10. How urgent is it to address OBDII code P2133 in a 2012 Ford Fusion?
- It is essential to address this code promptly to prevent potential safety hazards and further damage to the vehicle's components.
Discuss the causes and fixes for P2133 2012 Ford Fusion OBDII Code
Code P2133 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.