P2133 2010 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit High
Quick Answer
The P2133 diagnostic trouble code (DTC) for a 2010 Ford Fusion indicates a problem with the Throttle/Pedal Position Sensor/Switch 'F' Circuit being too high. Common causes include Faulty throttle position sensor, Wiring or connector issues in the throttle position sensor circuit, Electronic control module (ECM) malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2133 2010 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'F' Circuit High.
- Common causes
- Common causes include Faulty throttle position sensor, Wiring or connector issues in the throttle position sensor circuit, Electronic control module (ECM) malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2133 2010 Ford Fusion Description
The P2133 diagnostic trouble code (DTC) for a 2010 Ford Fusion indicates a problem with the Throttle/Pedal Position Sensor/Switch 'F' Circuit being too high. This code is specifically related to the electronic throttle control system of the vehicle. The throttle position sensor (TPS) and pedal position sensor work together to determine the position of the throttle pedal and adjust the throttle opening accordingly. When the 'F' circuit is reading a high voltage, it means that the signal being sent from the sensor is outside of the expected range. This can lead to issues with engine performance, fuel efficiency, and overall drivability.
Common Causes of P2133 2010 Ford Fusion
- Faulty throttle position sensor
- Wiring or connector issues in the throttle position sensor circuit
- Electronic control module (ECM) malfunction
- Corrosion or damage to sensor connections
- Throttle body issues
Symptoms of P2133 2010 Ford Fusion
- Reduced engine power
- Rough idling or stalling
- Delayed throttle response
- Check Engine Light illuminated
- Reduced fuel efficiency
How to Fix P2133 2010 Ford Fusion
- Begin by conducting a thorough inspection of the throttle position sensor and its wiring for any visible damage or corrosion.
- Test the throttle position sensor using a multimeter to check for proper voltage output.
- If the sensor is faulty, replace it with a new one and ensure proper calibration.
- Check the wiring harness and connectors for any breaks or loose connections, repairing or replacing as needed.
- Clear the DTC and perform a test drive to ensure the issue has been resolved.
Cost to Fix P2133 2010 Ford Fusion
The cost of repairing a Throttle/Pedal Position Sensor/Switch 'F' Circuit High issue on a 2010 Ford Fusion can vary depending on the specific cause of the problem. In general, the cost of a new throttle position sensor can range from $50 to $150, depending on the brand and quality. Labor costs for this repair can range from $100 to $300, depending on the shop's hourly rate and the complexity of the repair. Overall, the total cost for this repair could range from $150 to $450. It's important to note that these are rough estimates, and actual costs may vary based on the location and specific circumstances of the repair.
Need more information about the P2133 2010 Ford Fusion code?
Need more information on how to fix the P2133 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2133 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2133 2010 Ford Fusion Code
1. What are the common symptoms of OBDII code P2133 in a 2010 Ford Fusion?
- Common symptoms include reduced engine power, unresponsive throttle, hesitation during acceleration, and illuminated Check Engine Light.
2. What does the OBDII code P2133 on a 2010 Ford Fusion indicate?
- The code P2133 indicates a problem with the Throttle/Pedal Position Sensor/Switch 'F' Circuit High.
3. What are the potential causes of OBDII code P2133 in a 2010 Ford Fusion?
- Possible causes include a faulty throttle position sensor, issues with the pedal position sensor, damaged wiring or connectors, or a problem with the throttle body.
4. How can I diagnose the OBDII code P2133 in my 2010 Ford Fusion?
- Diagnosis involves using a scan tool to retrieve the trouble code, checking the throttle and pedal position sensor readings, inspecting wiring for damage, and testing sensor functionality.
5. Can I continue driving my 2010 Ford Fusion with OBDII code P2133?
- It is not recommended to drive the vehicle with code P2133 as it can lead to unsafe driving conditions and potential further damage to the vehicle.
6. How can I repair OBDII code P2133 on my 2010 Ford Fusion?
- Repair options may include replacing the throttle position sensor, pedal position sensor, repairing damaged wiring, or cleaning the throttle body.
7. Is it possible to reset OBDII code P2133 in a 2010 Ford Fusion without repairs?
- Resetting the code without addressing the underlying issue may temporarily turn off the Check Engine Light, but the problem will likely reoccur.
8. How much does it cost to fix OBDII code P2133 on a 2010 Ford Fusion?
- The cost of repairs for code P2133 can vary depending on the specific issue, but it may range from a few hundred dollars to over a thousand dollars, including parts and labor.
9. Can a DIY enthusiast fix OBDII code P2133 in a 2010 Ford Fusion?
- Depending on their skill level and access to tools, a DIY enthusiast may be able to diagnose and repair code P2133 by following repair guides and instructions.
10. How can I prevent OBDII code P2133 from occurring in the future on my 2010 Ford Fusion?
- Regular maintenance, such as cleaning the throttle body, inspecting wiring for damage, and addressing sensor issues promptly, can help prevent code P2133 from occurring.
Discuss the causes and fixes for P2133 2010 Ford Fusion OBDII Code
Code P2133 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.