Engine-Codes.com
Engine-Codes – Ford – P2132 2010 Ford Fusion

P2132 2010 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low

Quick Answer

The P2132 diagnostic trouble code (DTC) for a 2010 Ford Fusion indicates a problem with the Throttle/Pedal Position Sensor/Switch 'F' Circuit being low. Common causes include Faulty throttle position sensor, Damaged pedal position sensor, Wiring or connector issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2132 2010 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'F' Circuit Low.
Common causes
Common causes include Faulty throttle position sensor, Damaged pedal position sensor, Wiring or connector issues.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2132 2010 Ford Fusion Description

The P2132 diagnostic trouble code (DTC) for a 2010 Ford Fusion indicates a problem with the Throttle/Pedal Position Sensor/Switch 'F' Circuit being low. This code typically points to an issue with the electronic throttle control system, specifically related to the throttle position sensor (TPS) or pedal position sensor (PPS). The throttle position sensor is responsible for monitoring the position of the throttle valve and sending this information to the engine control module (ECM) to adjust the air-fuel mixture for optimal engine performance. The pedal position sensor, on the other hand, detects the position of the accelerator pedal and communicates this data to the ECM to control the throttle opening.

OBDII Code P2132 2010 Ford Fusion - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low
P2132 2010 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low

Common Causes of P2132 2010 Ford Fusion

  1. Faulty throttle position sensor
  2. Damaged pedal position sensor
  3. Wiring or connector issues
  4. ECM malfunction
  5. Corrosion or contamination in the sensor connections

Symptoms of P2132 2010 Ford Fusion

  1. Reduced engine power
  2. Rough idling or stalling
  3. Delayed throttle response
  4. Check Engine Light illuminated
  5. Limp mode activation

How to Fix P2132 2010 Ford Fusion

  1. Diagnose the issue using a scan tool to confirm the P2132 code and pinpoint the faulty sensor or wiring.
  2. Inspect the throttle position sensor and pedal position sensor for any signs of damage or wear.
  3. Check the wiring harness and connectors for any corrosion, breaks, or loose connections.
  4. Replace the faulty sensor or repair the wiring/connectors as needed.
  5. Clear the DTC and perform a test drive to ensure the issue has been resolved.

Cost to Fix P2132 2010 Ford Fusion

The typical repair costs for addressing a Throttle/Pedal Position Sensor/Switch 'F' Circuit Low issue can vary depending on the specific cause of the problem. In general, replacing a faulty sensor or repairing wiring/connectors can range from $100 to $300, including parts and labor. However, additional diagnostic time and labor costs may apply, so it's recommended to consult with a qualified mechanic for a more accurate estimate based on your vehicle's make and model. Keep in mind that labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150.

Need more information about the P2132 2010 Ford Fusion code?

Need more information on how to fix the P2132 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2132 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2132 2010 Ford Fusion Code

1. What are the common symptoms of OBDII code P2132 in a 2010 Ford Fusion?

The common symptoms of OBDII code P2132 in a 2010 Ford Fusion include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.

2. What does the OBDII code P2132 'Throttle/Pedal Position Sensor/Switch 'F' Circuit Low' indicate in a 2010 Ford Fusion?

This code indicates that there is a low voltage condition detected in the circuit related to the throttle or pedal position sensor/switch 'F' in a 2010 Ford Fusion.

3. What are the possible causes of OBDII code P2132 in a 2010 Ford Fusion?

Possible causes of OBDII code P2132 in a 2010 Ford Fusion include a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or a problem with the electronic throttle control system.

4. How can I diagnose the OBDII code P2132 in my 2010 Ford Fusion?

Diagnosing OBDII code P2132 in a 2010 Ford Fusion involves checking the throttle position sensor and its wiring for any signs of damage, testing the voltage in the circuit, and using a diagnostic scan tool to analyze the sensor's performance.

5. Is it safe to continue driving my 2010 Ford Fusion with OBDII code P2132 present?

It is not recommended to continue driving your 2010 Ford Fusion with OBDII code P2132 present, as it can lead to further damage to the engine or other components. It's best to address the issue promptly.

6. Can I repair OBDII code P2132 in my 2010 Ford Fusion on my own?

Repairing OBDII code P2132 in a 2010 Ford Fusion may be possible if you have the necessary tools and experience. However, it is recommended to seek professional help to accurately diagnose and fix the issue.

7. How much does it typically cost to repair OBDII code P2132 in a 2010 Ford Fusion?

The cost of repairing OBDII code P2132 in a 2010 Ford Fusion can vary depending on the specific cause of the issue. It may involve replacing the throttle position sensor, repairing wiring, or addressing other related issues.

8. Will resetting the OBDII code P2132 in my 2010 Ford Fusion make it go away permanently?

Resetting the OBDII code P2132 in your 2010 Ford Fusion may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear. It's essential to diagnose and fix the root cause of the problem.

9. Can a dirty throttle body cause OBDII code P2132 in a 2010 Ford Fusion?

While a dirty throttle body can affect the performance of the throttle system, it is not a common cause of OBDII code P2132 in a 2010 Ford Fusion. Focus on inspecting the throttle position sensor and related components first.

10. How urgent is it to address OBDII code P2132 in a 2010 Ford Fusion?

It is recommended to address OBDII code P2132 in a 2010 Ford Fusion as soon as possible to prevent further damage to the engine and ensure safe driving conditions. Ignoring the issue can lead to more severe problems.

Discuss the causes and fixes for P2132 2010 Ford Fusion OBDII Code

Submit a New Comment

Code P2132 2010 Ford Fusion comments

No comments found for this page.