P2130 Dodge Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit
Quick Answer
The P2130 diagnostic trouble code (DTC) for Dodge vehicles refers to an issue with the Throttle/Pedal Position Sensor/Switch 'F' Circuit. Common causes include Faulty throttle position sensor, Wiring or connector issues in the throttle position sensor circuit, Corrosion or damage to the sensor or its wiring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2130 Dodge indicates Throttle/Pedal Position Sensor/Switch 'F' Circuit.
- Common causes
- Common causes include Faulty throttle position sensor, Wiring or connector issues in the throttle position sensor circuit, Corrosion or damage to the sensor or its wiring.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2130 Dodge Description
The P2130 diagnostic trouble code (DTC) for Dodge vehicles refers to an issue with the Throttle/Pedal Position Sensor/Switch 'F' Circuit. This code indicates that there is a malfunction in the circuit responsible for monitoring the position of the throttle pedal or throttle position sensor. The throttle pedal position sensor plays a crucial role in determining how much fuel and air enter the engine, ultimately affecting its performance.
Common Causes of P2130 Dodge
- Faulty throttle position sensor
- Wiring or connector issues in the throttle position sensor circuit
- Corrosion or damage to the sensor or its wiring
- Electronic throttle control module malfunction
- ECM software issues
Symptoms of P2130 Dodge
- Engine hesitation or surging
- Reduced engine power
- Difficulty accelerating smoothly
- Stalling
- Illumination of the Check Engine Light
How to Fix P2130 Dodge
- Begin by diagnosing the issue using a scan tool to confirm the P2130 code and identify the specific component causing the problem.
- Inspect the throttle position sensor, wiring, and connectors for any damage or corrosion. Repair or replace as necessary.
- Clear the DTC and reset the ECM to see if the code reappears. Test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, check the electronic throttle control module and ECM for any faults. Replace or reprogram as needed.
- Finally, recheck the system for proper operation and ensure that the throttle pedal position sensor is functioning correctly.
Cost to Fix P2130 Dodge
The typical repair costs for addressing a P2130 code on a Dodge vehicle can vary depending on the specific cause of the issue. Generally, replacing a faulty throttle position sensor or repairing wiring/connectors can range from $150 to $300. If additional components such as the electronic throttle control module or ECM need to be replaced, the costs can increase to $500 or more. Labor rates at auto repair shops can range from $80 to $150 per hour, so the total cost may vary based on the shop's location and expertise in handling electronic throttle control systems. It's recommended to obtain a detailed estimate from a qualified mechanic to determine the exact cost for resolving the P2130 code on your Dodge vehicle.
Need more information about the P2130 Dodge code?
Need more information on how to fix the P2130 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2130 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2130 Dodge Code
What does the OBDII code P2130 mean for a Dodge vehicle?
The P2130 code indicates a problem with the Throttle/Pedal Position Sensor/Switch 'F' Circuit, which monitors the position of the throttle or pedal.
What are the common symptoms of P2130 on a Dodge?
Common symptoms include reduced engine performance, hesitation during acceleration, poor fuel efficiency, and possible activation of the limp mode.
What causes the P2130 code on a Dodge?
Causes include a faulty throttle/pedal position sensor, damaged wiring or connectors in the circuit, or issues with the vehicle’s PCM (Powertrain Control Module).
How can I fix the P2130 code on my Dodge?
Repairs may involve replacing the throttle/pedal position sensor, repairing damaged wiring or connectors, or reprogramming or replacing the PCM.
Can I drive my Dodge with the P2130 code?
Driving with this code is not recommended, as it can cause reduced engine performance and unsafe driving conditions.
How is the P2130 code diagnosed?
A mechanic will use a diagnostic scanner to read the code, inspect the throttle/pedal position sensor, and check the related wiring and connectors for damage or corrosion.
Is the P2130 code related to other throttle position codes?
Yes, the P2130 code is part of the throttle/pedal position circuit codes and may appear alongside other related codes if there are multiple issues.
How much does it cost to repair the P2130 code on a Dodge?
Repair costs vary but typically range from $150 to $400, depending on whether the sensor, wiring, or PCM needs replacement.
Can a dirty throttle body cause the P2130 code?
While a dirty throttle body itself may not directly cause the P2130 code, it can contribute to throttle-related issues that might trigger the code.
Will clearing the P2130 code solve the problem?
Clearing the code may temporarily turn off the check engine light, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P2130 Dodge OBDII Code
Code P2130 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.