P2128 Dodge Code - Throttle/Pedal Position Sensor/Switch 'E' Circuit High
Quick Answer
The P2128 diagnostic trouble code for Dodge vehicles indicates an issue with the Throttle/Pedal Position Sensor/Switch 'E' Circuit being too high. Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2128 Dodge indicates Throttle/Pedal Position Sensor/Switch 'E' Circuit High.
- Common causes
- Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2128 Dodge Description
The P2128 diagnostic trouble code for Dodge vehicles indicates an issue with the Throttle/Pedal Position Sensor/Switch 'E' Circuit being too high. This sensor is crucial for the proper functioning of the vehicle's electronic throttle control system, which regulates the engine's throttle based on driver input. The sensor is responsible for detecting the position of the throttle pedal and sending this information to the engine control module (ECM). When the ECM detects that the voltage signal from the sensor is higher than expected, it triggers the P2128 code.
Common Causes of P2128 Dodge
- Faulty throttle position sensor
- Damaged wiring or connectors in the sensor circuit
- Malfunctioning ECM
- Issues with the throttle body
- Corrosion or moisture in the sensor circuit
Symptoms of P2128 Dodge
- Reduced engine power
- Hesitation or stalling when accelerating
- Rough idling
- Vehicle going into limp mode
- Check Engine Light illuminated
How to Fix P2128 Dodge
- Begin by performing a thorough inspection of the throttle position sensor, wiring, and connectors to check for any visible damage or corrosion.
- Test the throttle position sensor using a multimeter to verify if it is functioning within the manufacturer's specifications. Replace the sensor if it is found to be faulty.
- Check the wiring harness for any breaks, shorts, or damage. Repair or replace any damaged wires as needed.
- Clear the trouble code from the ECM using a scan tool and perform a test drive to ensure the issue has been resolved.
- If the problem persists, further diagnostics may be needed to check for ECM or throttle body malfunctions.
Cost to Fix P2128 Dodge
The cost of repairing a P2128 code in a Dodge vehicle can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay anywhere from $150 to $400 for parts and labor. Keep in mind that diagnostic time and labor rates at auto repair shops can fluctuate, so it's best to obtain quotes from multiple sources to get a more accurate estimate. Additionally, costs may be higher if specialized equipment or expertise is required for the repair.
Need more information about the P2128 Dodge code?
Need more information on how to fix the P2128 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2128 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2128 Dodge Code
What does the OBDII code P2128 mean on a Dodge vehicle?
P2128 indicates a "Throttle/Pedal Position Sensor/Switch 'E' Circuit High," meaning the voltage in the throttle or pedal position sensor circuit is higher than the expected range.
What are the common symptoms of code P2128 in a Dodge?
Symptoms may include reduced engine power, poor throttle response, the vehicle going into limp mode, and the Check Engine Light being illuminated.
What causes code P2128 to appear in Dodge vehicles?
Common causes include a faulty throttle/pedal position sensor, damaged or corroded wiring, a bad electrical connection, or a malfunctioning engine control module (ECM).
Can I drive my Dodge with a P2128 code?
Driving with a P2128 code is not recommended, as it may lead to unsafe driving conditions due to reduced engine power or throttle response issues.
How do I fix the P2128 code on my Dodge?
Start by inspecting the throttle/pedal position sensor, checking the wiring and connectors for damage or corrosion, and replacing any faulty components. If the issue persists, further diagnostics of the ECM may be necessary.
How much does it cost to repair a P2128 code?
The cost depends on the cause. Replacing a throttle/pedal position sensor typically costs $100–$300, while fixing wiring issues may vary based on labor rates. ECM repairs could be more expensive.
Can a dirty throttle body cause a P2128 code?
No, a dirty throttle body is unlikely to trigger a P2128 code, as this code specifically relates to high voltage in the sensor circuit, not mechanical issues like dirt buildup.
How can I diagnose the P2128 code on my Dodge at home?
Use a multimeter to check the voltage at the throttle/pedal position sensor and inspect the wiring for breaks or corrosion. Compare the readings to the manufacturer’s specifications.
Does a P2128 code mean the sensor is bad?
Not necessarily. While a faulty sensor is a common cause, the issue could also result from wiring problems or a malfunctioning ECM.
Will clearing the P2128 code fix the issue?
Clearing the code will turn off the Check Engine Light temporarily, but the underlying problem must be resolved, or the code will return.
Discuss the causes and fixes for P2128 Dodge OBDII Code
Code P2128 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.