Engine-Codes.com
Engine-Codes – Nissan – P2128 2011 Nissan Sentra

P2128 2011 Nissan Sentra Code - Accelerator Pedal Position Sensor Circuit

Quick Answer

The P2128 diagnostic trouble code (DTC) in a 2011 Nissan Sentra relates to the Accelerator Pedal Position Sensor Circuit. Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2128 2011 Nissan Sentra indicates Accelerator Pedal Position Sensor Circuit.
Common causes
Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning ECM.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 13, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2128 2011 Nissan Sentra Description

The P2128 diagnostic trouble code (DTC) in a 2011 Nissan Sentra relates to the Accelerator Pedal Position Sensor Circuit. This code indicates that there is a malfunction in the circuit that controls the accelerator pedal position sensor. The accelerator pedal position sensor is a crucial component of the vehicle's electronic throttle control system. It is responsible for sending signals to the engine control module (ECM) regarding the position of the accelerator pedal, allowing the ECM to adjust the throttle accordingly.

OBDII Code P2128 2011 Nissan Sentra - Accelerator Pedal Position Sensor Circuit
P2128 2011 Nissan Sentra Code - Accelerator Pedal Position Sensor Circuit

Common Causes of P2128 2011 Nissan Sentra

  1. Faulty accelerator pedal position sensor
  2. Damaged wiring or connectors in the sensor circuit
  3. Malfunctioning ECM
  4. Corrosion or moisture in the sensor circuit
  5. Electrical issues such as short circuits or open circuits

Symptoms of P2128 2011 Nissan Sentra

  1. Reduced engine power
  2. Unresponsive accelerator pedal
  3. Check Engine Light illuminated
  4. Rough idling
  5. Stalling during acceleration

How to Fix P2128 2011 Nissan Sentra

  1. Diagnose the issue using a scan tool to retrieve the specific trouble code and perform a thorough inspection of the accelerator pedal position sensor circuit.
  2. Check the wiring and connectors for any signs of damage, corrosion, or loose connections. Repair or replace as necessary.
  3. Test the accelerator pedal position sensor for proper operation using a multimeter or oscilloscope. Replace the sensor if it is faulty.
  4. Clear the trouble code from the ECM's memory and perform a road test to verify that the issue has been resolved.
  5. If the problem persists, further diagnosis may be required to identify any underlying issues with the ECM or other related components.

Cost to Fix P2128 2011 Nissan Sentra

The typical repair costs for addressing the P2128 code in a 2011 Nissan Sentra can range from $200 to $500, depending on the specific cause of the issue and the cost of parts and labor. It is important to note that diagnosis time and labor rates at auto repair shops can vary significantly based on factors such as location, vehicle make and model, and engine type. It is advisable to contact local auto repair shops for a more accurate estimate based on your specific circumstances.

When is the Code Detected?

An excessively low voltage from the APP sensor 2 is sent to ECM.

Need more information about the P2128 2011 Nissan Sentra code?

Need more information on how to fix the P2128 2011 Nissan Sentra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2128 2011 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2128 2011 Nissan Sentra Code

1. What are the common symptoms of OBDII code P2128 in a 2011 Nissan Sentra?

- Common symptoms include the vehicle going into limp mode, loss of power, acceleration issues, and the check engine light illuminating.

2. What does OBDII code P2128 indicate in a 2011 Nissan Sentra?

- OBDII code P2128 indicates a problem with the accelerator pedal position sensor circuit in the vehicle.

3. What are the possible causes of OBDII code P2128 in a 2011 Nissan Sentra?

- Possible causes include a faulty accelerator pedal position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module.

4. How can I diagnose the issue causing OBDII code P2128 in my 2011 Nissan Sentra?

- Diagnosing the issue may involve checking the sensor's wiring and connectors for damage, testing the sensor's resistance, and using a scan tool to monitor sensor data.

5. Can I continue driving my 2011 Nissan Sentra with OBDII code P2128?

- It is not recommended to continue driving the vehicle with code P2128 as it can lead to unsafe driving conditions and potential damage to the engine.

6. How can I repair OBDII code P2128 in my 2011 Nissan Sentra?

- Repairing the issue may involve replacing the accelerator pedal position sensor, repairing damaged wiring or connectors, or reprogramming the engine control module.

7. Is it possible to reset OBDII code P2128 in a 2011 Nissan Sentra without fixing the underlying issue?

- While you can clear the code with a scan tool, it is important to address the root cause of the problem to prevent it from recurring.

8. Are there any tips to prevent OBDII code P2128 from occurring in a 2011 Nissan Sentra?

- Regularly inspecting and maintaining the accelerator pedal position sensor, wiring, and connectors can help prevent code P2128 from occurring.

9. How long does it typically take to repair OBDII code P2128 in a 2011 Nissan Sentra?

- The repair time can vary depending on the exact cause of the issue, but it may take a few hours to a full day to diagnose and fix the problem.

10. Can a DIY enthusiast without much experience repair OBDII code P2128 in a 2011 Nissan Sentra?

- While some aspects of the repair may be DIY-friendly, dealing with complex electronic components like sensors and modules may require professional expertise to ensure proper diagnosis and repair.

Discuss the causes and fixes for P2128 2011 Nissan Sentra OBDII Code

Submit a New Comment

Code P2128 2011 Nissan Sentra comments

No comments found for this page.