Engine-Codes.com
Engine-Codes – Nissan – P2128 2010 Nissan Rogue

P2128 2010 Nissan Rogue Code - Accelerator Pedal Position Sensor Circuit

Quick Answer

The P2128 code for a 2010 Nissan Rogue relates to the Accelerator Pedal Position Sensor Circuit. Common causes include Faulty accelerator pedal position sensor, Wiring issues or a poor connection in the sensor circuit, Corrosion or damage to the sensor components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2128 2010 Nissan Rogue indicates Accelerator Pedal Position Sensor Circuit.
Common causes
Common causes include Faulty accelerator pedal position sensor, Wiring issues or a poor connection in the sensor circuit, Corrosion or damage to the sensor components.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2128 2010 Nissan Rogue Description

The P2128 code for a 2010 Nissan Rogue relates to the Accelerator Pedal Position Sensor Circuit. This code indicates that there is a problem with the sensor that monitors the position of the accelerator pedal. The accelerator pedal position sensor is a vital component of the vehicle's electronic throttle control system. It sends signals to the engine control module (ECM) to determine how much fuel to inject into the engine and how to adjust the throttle accordingly.

OBDII Code P2128 2010 Nissan Rogue - Accelerator Pedal Position Sensor Circuit
P2128 2010 Nissan Rogue Code - Accelerator Pedal Position Sensor Circuit

Common Causes of P2128 2010 Nissan Rogue

  1. Faulty accelerator pedal position sensor.
  2. Wiring issues or a poor connection in the sensor circuit.
  3. Corrosion or damage to the sensor components.
  4. Issues with the ECM or other related control modules.
  5. Environmental factors such as moisture or debris affecting the sensor.

Symptoms of P2128 2010 Nissan Rogue

  1. Hesitation or lack of response when pressing the accelerator pedal.
  2. Rough idling or uneven engine performance.
  3. Reduced power or acceleration.
  4. Engine stalling or difficulty starting.
  5. Illumination of the check engine light on the dashboard.

How to Fix P2128 2010 Nissan Rogue

  1. Begin by diagnosing the issue using a diagnostic scanner to retrieve the trouble code and perform a thorough inspection of the accelerator pedal position sensor and its wiring.
  2. Check for any loose connections, corrosion, or damage to the sensor components. Repair or replace any faulty parts as needed.
  3. Clear the trouble code from the ECM's memory and reset the system to see if the issue persists.
  4. Test drive the vehicle to ensure that the accelerator pedal position sensor is functioning correctly and that the symptoms have been resolved.
  5. If the problem persists, further diagnostics may be required to pinpoint the exact cause of the issue, such as testing the ECM or other related components.

Cost to Fix P2128 2010 Nissan Rogue

The typical repair costs for addressing a P2128 code on a 2010 Nissan Rogue can vary depending on the extent of the issue and the specific parts that need to be replaced. In general, the cost of replacing an accelerator pedal position sensor can range from $100 to $300, including parts and labor. Additional diagnostic fees and labor costs may apply, so it's advisable to consult with a trusted mechanic or auto repair shop for a more accurate estimate. Keep in mind that labor rates can vary based on location, the vehicle's make and model, and the type of engine, so it's essential to factor in these variables when budgeting for the repair.

When is the Code Detected?

An excessively low voltage from the APP sensor 2 is sent to ECM.

Need more information about the P2128 2010 Nissan Rogue code?

Need more information on how to fix the P2128 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2128 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2128 2010 Nissan Rogue Code

1. What is OBDII code P2128 in a 2010 Nissan Rogue?

The OBDII code P2128 in a 2010 Nissan Rogue refers to an issue with the Accelerator Pedal Position Sensor Circuit.

2. What are the common symptoms of OBDII code P2128 in a 2010 Nissan Rogue?

Common symptoms of OBDII code P2128 in a 2010 Nissan Rogue include reduced engine power, hesitation or jerking during acceleration, and the vehicle going into limp mode.

3. What are the possible causes of OBDII code P2128 in a 2010 Nissan Rogue?

Possible causes of OBDII code P2128 in a 2010 Nissan Rogue include a faulty accelerator pedal position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module.

4. How can I diagnose OBDII code P2128 in a 2010 Nissan Rogue?

Diagnosing OBDII code P2128 in a 2010 Nissan Rogue involves using a scan tool to retrieve the trouble codes, checking the accelerator pedal position sensor for proper operation, and inspecting the sensor circuit for any faults.

5. How can I repair OBDII code P2128 in a 2010 Nissan Rogue?

Repairing OBDII code P2128 in a 2010 Nissan Rogue may involve replacing the accelerator pedal position sensor, repairing or replacing damaged wiring or connectors, or reprogramming the engine control module.

6. Can I continue driving my 2010 Nissan Rogue with OBDII code P2128?

It is not recommended to continue driving your 2010 Nissan Rogue with OBDII code P2128, as it can lead to further damage to the vehicle and potentially unsafe driving conditions.

7. How much does it cost to fix OBDII code P2128 in a 2010 Nissan Rogue?

The cost to fix OBDII code P2128 in a 2010 Nissan Rogue can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

8. Will resetting the OBDII code P2128 in a 2010 Nissan Rogue make it go away permanently?

Resetting the OBDII code P2128 in a 2010 Nissan Rogue may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear.

9. Can a DIY enthusiast fix OBDII code P2128 in a 2010 Nissan Rogue?

While some aspects of diagnosing and repairing OBDII code P2128 in a 2010 Nissan Rogue can be done by a DIY enthusiast, it is recommended to consult a professional mechanic for a proper diagnosis and repair.

10. How often does OBDII code P2128 occur in a 2010 Nissan Rogue?

OBDII code P2128 in a 2010 Nissan Rogue is not a common issue, but it can occur due to various factors such as sensor wear, wiring issues, or electronic control module malfunctions.

Discuss the causes and fixes for P2128 2010 Nissan Rogue OBDII Code

Submit a New Comment

Code P2128 2010 Nissan Rogue comments

No comments found for this page.