P2128 2007 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'E' Circuit High
Quick Answer
The P2128 code for a 2007 Ford Fusion indicates a problem with the Throttle/Pedal Position Sensor/Switch 'E' Circuit being too high. Common causes include Faulty Throttle/Pedal Position Sensor/Switch, Wiring or connector issues in the sensor circuit, ECM malfunction or software glitches. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2128 2007 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'E' Circuit High.
- Common causes
- Common causes include Faulty Throttle/Pedal Position Sensor/Switch, Wiring or connector issues in the sensor circuit, ECM malfunction or software glitches.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2128 2007 Ford Fusion Description
The P2128 code for a 2007 Ford Fusion indicates a problem with the Throttle/Pedal Position Sensor/Switch 'E' Circuit being too high. This sensor is crucial for the vehicle's electronic throttle control system, as it monitors the position of the throttle pedal and sends signals to the engine control module (ECM) to adjust the throttle opening accordingly. When the circuit voltage is higher than expected, it can lead to issues with engine performance, fuel efficiency, and overall drivability.
Common Causes of P2128 2007 Ford Fusion
- Faulty Throttle/Pedal Position Sensor/Switch
- Wiring or connector issues in the sensor circuit
- ECM malfunction or software glitches
- Throttle body problems
- Environmental factors such as moisture or corrosion affecting sensor operation
Symptoms of P2128 2007 Ford Fusion
- Rough idling or unstable engine speed
- Engine stalling or hesitation during acceleration
- Reduced fuel efficiency
- Illuminated Check Engine Light
- Limited throttle response or unresponsive pedal
How to Fix P2128 2007 Ford Fusion
- Begin by conducting a thorough inspection of the Throttle/Pedal Position Sensor/Switch and its wiring harness to check for any visible damage or corrosion.
- Use a multimeter to test the sensor's voltage output and resistance to determine if it is within the manufacturer's specifications.
- Replace the sensor if it fails the voltage and resistance tests, ensuring to install a genuine OEM part for optimal performance.
- Clear the diagnostic trouble codes from the ECM using a scan tool and perform a test drive to verify that the issue has been resolved.
- If the problem persists, further diagnostics may be required to identify underlying issues such as wiring faults or ECM problems.
Cost to Fix P2128 2007 Ford Fusion
The typical repair costs for addressing a P2128 code on a 2007 Ford Fusion may range from $150 to $400, including parts and labor. However, it is essential to note that the actual costs can vary based on factors such as the location of the repair shop, the specific make and model of the vehicle, and the complexity of the repair. Additionally, diagnostic time and labor rates can influence the overall cost, with rates typically ranging from $80 to $150 per hour. It is advisable to contact local auto repair shops for a more accurate estimate based on your specific circumstances.
Need more information about the P2128 2007 Ford Fusion code?
Need more information on how to fix the P2128 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2128 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2128 2007 Ford Fusion Code
1. What are the common symptoms of OBDII code P2128 in a 2007 Ford Fusion?
The common symptoms of code P2128 include reduced engine power, acceleration hesitation, and the illumination of the check engine light.
2. What does the OBDII code P2128 'Throttle/Pedal Position Sensor/Switch 'E' Circuit High' mean for a 2007 Ford Fusion?
Code P2128 indicates that the voltage signal from the throttle or pedal position sensor/switch 'E' circuit is higher than normal, potentially causing issues with the vehicle's throttle control system.
3. What are the possible causes of OBDII code P2128 in a 2007 Ford Fusion?
Potential causes of code P2128 include a faulty throttle position sensor, damaged wiring or connectors in the throttle control circuit, or issues with the engine control module.
4. How can I diagnose the OBDII code P2128 in my 2007 Ford Fusion?
Diagnosing code P2128 typically involves using a scan tool to check for the code, testing the throttle position sensor's voltage output, inspecting the wiring and connectors for damage, and verifying the functionality of related components.
5. Is it safe to continue driving my 2007 Ford Fusion with OBDII code P2128 present?
It is not recommended to drive your vehicle with code P2128 present, as it can lead to reduced engine power and potential safety hazards due to throttle control issues.
6. Can I repair OBDII code P2128 in my 2007 Ford Fusion myself?
Repairing code P2128 may require technical knowledge and experience with automotive electrical systems. It is recommended to consult a professional mechanic to properly diagnose and repair the issue.
7. How much does it typically cost to repair OBDII code P2128 in a 2007 Ford Fusion?
The cost of repairing code P2128 can vary depending on the exact cause of the issue. It may involve replacing the throttle position sensor, repairing damaged wiring, or addressing other related components, so costs can range from a few hundred to over a thousand dollars.
8. Can a dirty throttle body cause OBDII code P2128 in a 2007 Ford Fusion?
While a dirty throttle body can affect throttle response and performance, it is unlikely to directly cause code P2128. However, it is still important to keep the throttle body clean as part of regular maintenance.
9. Will resetting the OBDII code P2128 in my 2007 Ford Fusion make it go away permanently?
Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing code P2128 is not addressed, the code is likely to return. It is crucial to diagnose and repair the root cause of the problem.
10. How long does it take to repair OBDII code P2128 in a 2007 Ford Fusion?
The repair time for code P2128 can vary depending on the exact cause and complexity of the issue. It may take a few hours to a full day to diagnose and repair the problem, so it's best to consult a professional mechanic for an accurate estimate.
Discuss the causes and fixes for P2128 2007 Ford Fusion OBDII Code
Code P2128 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.