P2127 GMC Code - Accelerator Pedal Position Sensor 2 Circuit Low Voltage
Quick Answer
The P2127 diagnostic trouble code (DTC) for GMC vehicles indicates an issue with the Accelerator Pedal Position Sensor 2 Circuit, specifically signaling low voltage. Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2127 GMC indicates Accelerator Pedal Position Sensor 2 Circuit Low Voltage.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2127 GMC Description
The P2127 diagnostic trouble code (DTC) for GMC vehicles indicates an issue with the Accelerator Pedal Position Sensor 2 Circuit, specifically signaling low voltage. The accelerator pedal position sensor is a crucial component of the vehicle's electronic throttle control system. It detects the position of the accelerator pedal and sends this information to the Engine Control Module (ECM) to determine the appropriate throttle response.
Common Causes of P2127 GMC
- Faulty accelerator pedal position sensor
- Damaged wiring or connectors in the sensor circuit
- Malfunctioning ECM
- Corrosion or moisture in the sensor circuit
- Electrical issues within the throttle control system
Symptoms of P2127 GMC
- Reduced engine power
- Delayed throttle response
- Illumination of the Check Engine Light
- Poor fuel economy
- Vehicle going into limp mode
How to Fix P2127 GMC
- Perform a thorough inspection of the accelerator pedal position sensor and its wiring to check for any visible damage or corrosion.
- Test the sensor's output voltage using a multimeter to verify if it is within the specified range.
- If the sensor is faulty, replace it with a new, OEM-approved part.
- Clear the DTC using a scan tool and perform a test drive to ensure the issue has been resolved.
- If the problem persists, further diagnostics may be required to identify any underlying issues with the ECM or other components in the throttle control system.
Cost to Fix P2127 GMC
The typical repair costs for resolving a P2127 code related to the Accelerator Pedal Position Sensor 2 Circuit Low Voltage can vary depending on the specific cause of the issue. In general, replacement of the sensor itself can range from $100 to $200, while diagnostic fees and labor costs can add another $100 to $200 to the total bill.
Need more information about the P2127 GMC code?
Need more information on how to fix the P2127 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2127 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P2127 2014 GMC Sierra — Accelerator Pedal Position Sensor 2 Circuit Low Voltage
- P2127 2015 GMC Sierra — Accelerator Pedal Position Sensor 2 Circuit Low Voltage
- P2127 2016 GMC Sierra — Accelerator Pedal Position Sensor 2 Circuit Low Voltage
- P2127 2017 GMC Sierra — Accelerator Pedal Position Sensor 2 Circuit Low Voltage
- P2127 2018 GMC Sierra — Accelerator Pedal Position Sensor 2 Circuit Low Voltage
Frequently Asked Questions about P2127 GMC Code
No Frequently Asked Questions about P2127 GMC Code found.
Discuss the causes and fixes for P2127 GMC OBDII Code
Code P2127 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.