P2123 2015 GMC Sierra Code - Accelerator Pedal Position Sensor 1 Circuit High Voltage
Quick Answer
The P2123 diagnostic trouble code (DTC) for the 2015 GMC Sierra refers to an issue with the Accelerator Pedal Position Sensor 1 Circuit High Voltage. Common causes include Faulty sensor: The accelerator pedal position sensor may be malfunctioning due to wear and tear or electronic issues, Wiring issues: Corrosion, damage, or poor connections in the wiring harness can disrupt the signal from the sensor to the ECM, ECM malfunction: A problem with the Engine Control Module can also cause the high voltage readings from the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2123 2015 GMC Sierra indicates Accelerator Pedal Position Sensor 1 Circuit High Voltage.
- Common causes
- Common causes include Faulty sensor: The accelerator pedal position sensor may be malfunctioning due to wear and tear or electronic issues, Wiring issues: Corrosion, damage, or poor connections in the wiring harness can disrupt the signal from the sensor to the ECM, ECM malfunction: A problem with the Engine Control Module can also cause the high voltage readings from the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2123 2015 GMC Sierra Description
The P2123 diagnostic trouble code (DTC) for the 2015 GMC Sierra refers to an issue with the Accelerator Pedal Position Sensor 1 Circuit High Voltage. This sensor is responsible for monitoring the position of the accelerator pedal and sending signals to the Engine Control Module (ECM) to adjust the fuel injection and ignition timing accordingly. When the sensor detects a high voltage signal that is outside the normal operating range, it triggers the P2123 code.
Common Causes of P2123 2015 GMC Sierra
- Faulty sensor: The accelerator pedal position sensor may be malfunctioning due to wear and tear or electronic issues.
- Wiring issues: Corrosion, damage, or poor connections in the wiring harness can disrupt the signal from the sensor to the ECM.
- ECM malfunction: A problem with the Engine Control Module can also cause the high voltage readings from the sensor.
- Environmental factors: Exposure to moisture, extreme temperatures, or contaminants can affect the sensor's performance.
- Mechanical damage: Physical damage to the sensor or its components can lead to high voltage readings and trigger the P2123 code.
Symptoms of P2123 2015 GMC Sierra
- Erratic acceleration: The vehicle may experience sudden surges or dips in speed, making it difficult to maintain a consistent pace.
- Reduced fuel efficiency: Due to incorrect signals being sent to the ECM, the engine may not be operating efficiently, leading to decreased fuel economy.
- Engine stalling: In severe cases, the engine may stall unexpectedly, posing a safety risk to the driver and passengers.
- Check Engine Light: The illumination of the Check Engine Light on the dashboard is a common symptom of this issue, signaling a problem with the accelerator pedal position sensor.
How to Fix P2123 2015 GMC Sierra
- Diagnose the issue: Use a diagnostic scanner to retrieve the trouble code and perform a thorough inspection of the accelerator pedal position sensor and associated components.
- Replace the sensor: If the sensor is found to be faulty, replace it with a new one following the manufacturer's guidelines.
- Check wiring and connectors: Inspect the wiring harness and connectors for any damage, corrosion, or loose connections. Repair or replace as necessary.
- Clear the code: After completing the repair, clear the DTC and test drive the vehicle to ensure the issue has been resolved.
- Perform a relearn procedure: In some cases, a relearn procedure may be required to recalibrate the new sensor with the ECM for optimal performance.
Cost to Fix P2123 2015 GMC Sierra
The typical repair costs for addressing the P2123 code on a 2015 GMC Sierra can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically falling between $80 and $150. Factors such as location, vehicle make and model, and engine type can also impact the final repair costs. For a more accurate estimate, it's recommended to consult with a local auto repair shop.
Need more information about the P2123 2015 GMC Sierra code?
Need more information on how to fix the P2123 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2123 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2123 2015 GMC Sierra Code
What does the OBDII code P2123 mean for a 2015 GMC Sierra?
P2123 indicates a high voltage issue in the Accelerator Pedal Position Sensor 1 circuit, which helps monitor the position of the accelerator pedal.
What are the common symptoms of P2123 in a 2015 GMC Sierra?
Symptoms may include reduced engine power, hesitation during acceleration, poor throttle response, or the vehicle entering "limp mode."
What causes the P2123 code to appear?
Common causes include a faulty accelerator pedal position sensor, wiring issues such as damaged or corroded connections, or a malfunctioning throttle body.
Can I drive my 2015 GMC Sierra with the P2123 code?
Driving with this code may result in limited engine power and potential safety risks. It’s best to address the issue promptly to avoid further damage.
How do I diagnose the P2123 code on a 2015 GMC Sierra?
Start by inspecting the wiring and connectors for damage or corrosion. Use a multimeter to test the sensor voltage and check for irregularities.
How do I fix the P2123 code on a 2015 GMC Sierra?
Repairs may include replacing the accelerator pedal position sensor, repairing or replacing damaged wiring, or cleaning the throttle body.
How much does it cost to fix the P2123 code on a 2015 GMC Sierra?
Repair costs vary but typically range from $100 to $300, depending on whether the sensor or wiring needs replacement.
Can a dirty throttle body cause the P2123 code?
Yes, a dirty or malfunctioning throttle body can contribute to this code by affecting proper communication between the sensors and the engine control module.
Do I need special tools to fix the P2123 code on a GMC Sierra?
Basic tools like a multimeter and OBDII scanner are sufficient for diagnosis. Replacement of parts may require standard hand tools.
Is the P2123 code covered under warranty for a 2015 GMC Sierra?
It depends on the vehicle’s warranty coverage. If the issue is related to a defective sensor or throttle body, it might be covered under certain warranties.
Discuss the causes and fixes for P2123 2015 GMC Sierra OBDII Code
Code P2123 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.