P2123 2013 Nissan Rogue Code - Accelerator Pedal Position Sensor Circuit Range/Performance
Quick Answer
The P2123 diagnostic trouble code (DTC) in a 2013 Nissan Rogue indicates a problem with the accelerator pedal position sensor circuit's range or performance. Common causes include Faulty accelerator pedal position sensor, Wiring or connector issues in the sensor circuit, ECM software malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2123 2013 Nissan Rogue indicates Accelerator Pedal Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Wiring or connector issues in the sensor circuit, ECM software malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2123 2013 Nissan Rogue Description
The P2123 diagnostic trouble code (DTC) in a 2013 Nissan Rogue indicates a problem with the accelerator pedal position sensor circuit's range or performance. The accelerator pedal position sensor is a crucial component that communicates the position of the accelerator pedal to the engine control module (ECM). This information is used by the ECM to determine the appropriate fuel delivery and ignition timing for optimal engine performance.
Common Causes of P2123 2013 Nissan Rogue
- Faulty accelerator pedal position sensor
- Wiring or connector issues in the sensor circuit
- ECM software malfunction
- Throttle body issues
- Electronic throttle control malfunction
Symptoms of P2123 2013 Nissan Rogue
- Reduced engine power
- Poor acceleration
- Stalling or hesitation when accelerating
- Check Engine Light illuminated
- Difficulty maintaining speed
How to Fix P2123 2013 Nissan Rogue
- Diagnose the issue by using a scan tool to read the DTC and test the accelerator pedal position sensor's signal.
- Inspect the wiring and connectors for any damage or corrosion. Repair or replace as needed.
- Test the throttle body for proper operation and clean if necessary.
- Reset the ECM and perform a throttle relearn procedure.
- If the issue persists, replace the accelerator pedal position sensor.
Cost to Fix P2123 2013 Nissan Rogue
The cost of repairing the P2123 code in a 2013 Nissan Rogue can vary depending on the specific cause of the issue. On average, the parts for this repair can range from $50 to $200, while the labor costs can range from $100 to $300. Overall, the total repair cost could fall between $150 and $500. It's important to note that these are rough estimates, and actual costs may vary based on the location, labor rates, and any additional parts or services required. It's recommended to consult with a trusted mechanic or repair shop for a more accurate cost estimate.
Need more information about the P2123 2013 Nissan Rogue code?
Need more information on how to fix the P2123 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2123 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2123 2013 Nissan Rogue Code
1. What are the common symptoms of OBDII code P2123 in a 2013 Nissan Rogue?
- Common symptoms include issues with acceleration, reduced engine power, hesitation, and in some cases, the vehicle may go into a limp mode.
2. What does the OBDII code P2123 mean for a 2013 Nissan Rogue?
- OBDII code P2123 indicates a problem with the accelerator pedal position sensor circuit, specifically related to range/performance issues.
3. What are the possible causes of OBDII code P2123 in a 2013 Nissan Rogue?
- The code P2123 in a 2013 Nissan Rogue can be caused by a faulty accelerator pedal position sensor, wiring issues, or problems with the electronic throttle control system.
4. How can I diagnose the issue causing OBDII code P2123 in my 2013 Nissan Rogue?
- Diagnosis typically involves checking the accelerator pedal position sensor for proper voltage and resistance, inspecting the wiring harness for damage, and testing the electronic throttle control system.
5. Can I continue driving my 2013 Nissan Rogue with OBDII code P2123?
- It is not recommended to continue driving your vehicle with code P2123, as it can lead to further damage and safety concerns. It's best to address the issue promptly.
6. What are some repair tips for fixing OBDII code P2123 in a 2013 Nissan Rogue?
- Repair may involve replacing the accelerator pedal position sensor, repairing or replacing damaged wiring, or addressing issues with the electronic throttle control system.
7. Is it possible to reset OBDII code P2123 in a 2013 Nissan Rogue without fixing the underlying issue?
- While you can clear the code with an OBDII scanner, it will likely return if the root cause of the problem is not addressed. It's important to diagnose and fix the issue to prevent further issues.
8. Can a DIY enthusiast address OBDII code P2123 in a 2013 Nissan Rogue?
- Depending on your skill level and access to tools, some DIY enthusiasts may be able to address code P2123 by replacing the accelerator pedal position sensor or repairing wiring. However, professional diagnosis is recommended for accurate repair.
9. How much does it typically cost to fix OBDII code P2123 in a 2013 Nissan Rogue?
- The cost of fixing code P2123 can vary depending on the exact cause of the issue. Expenses may include parts and labor, with costs ranging from a couple of hundred dollars to over a thousand dollars for more complex repairs.
10. Will fixing OBDII code P2123 improve the performance and drivability of my 2013 Nissan Rogue?
- Yes, addressing code P2123 and fixing the underlying issue should improve the performance and drivability of your 2013 Nissan Rogue by resolving acceleration and engine power concerns associated with the accelerator pedal position sensor circuit.
Discuss the causes and fixes for P2123 2013 Nissan Rogue OBDII Code
Code P2123 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.