P2123 2010 Nissan Altima Sedan Code - Accelerator Pedal Position Sensor Circuit Range/Performance
Quick Answer
The P2123 diagnostic trouble code (DTC) for a 2010 Nissan Altima Sedan refers to the Accelerator Pedal Position Sensor Circuit Range/Performance. Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2123 2010 Nissan Altima Sedan indicates Accelerator Pedal Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2123 2010 Nissan Altima Sedan Description
The P2123 diagnostic trouble code (DTC) for a 2010 Nissan Altima Sedan refers to the Accelerator Pedal Position Sensor Circuit Range/Performance. This code indicates that there is an issue with the accelerator pedal position sensor, which is responsible for sending signals to the engine control module (ECM) regarding the position of the accelerator pedal. The ECM uses this information to determine the appropriate fuel delivery and ignition timing for optimal engine performance.
Common Causes of P2123 2010 Nissan Altima Sedan
- Faulty accelerator pedal position sensor
- Damaged wiring or connectors in the sensor circuit
- Malfunctioning ECM
- Corrosion or contamination in the sensor circuit
- Electrical issues such as short circuits or open circuits
Symptoms of P2123 2010 Nissan Altima Sedan
- Rough idling or engine stalling
- Lack of power or hesitation during acceleration
- Check Engine Light illuminated on the dashboard
- Reduced fuel efficiency
- Engine misfires
How to Fix P2123 2010 Nissan Altima Sedan
- Use an OBD-II scanner to retrieve the trouble codes and confirm the presence of P2123.
- Inspect the accelerator pedal position sensor and its wiring for any visible damage or corrosion.
- Test the sensor's resistance and voltage output to determine if it is functioning within specifications.
- Replace the accelerator pedal position sensor if it is found to be faulty.
- Clear the DTCs from the ECM's memory and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P2123 2010 Nissan Altima Sedan
The typical repair costs for addressing the P2123 code on a 2010 Nissan Altima Sedan can range from $150 to $300, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically falling between $80 and $150. Factors such as location, vehicle make and model, and engine type can also impact the overall repair costs. For a more accurate estimate, it is recommended to consult with local auto repair shops.
Need more information about the P2123 2010 Nissan Altima Sedan code?
Need more information on how to fix the P2123 2010 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2123 2010 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2123 2010 Nissan Altima Sedan Code
1. What does the OBDII code P2123 mean on a 2010 Nissan Altima Sedan?
P2123 indicates an issue with the Accelerator Pedal Position Sensor, specifically a range or performance problem in its circuit.
2. What are the common symptoms of code P2123 in a 2010 Nissan Altima?
Symptoms may include reduced engine power, unresponsive throttle, activation of "limp mode," and the illumination of the check engine light.
3. What causes the P2123 code to appear in a 2010 Nissan Altima?
Common causes include a faulty accelerator pedal position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).
4. Can I still drive my 2010 Nissan Altima with a P2123 code?
Driving with a P2123 code is not recommended, as the vehicle may enter limp mode, limiting performance and potentially creating unsafe driving conditions.
5. How do I diagnose the P2123 code on a 2010 Nissan Altima?
Diagnosis involves inspecting the accelerator pedal position sensor, checking for damaged wiring or loose connections, and using a scan tool to monitor sensor voltage readings.
6. How do you fix a P2123 code on a 2010 Nissan Altima?
Repairs may include replacing the faulty accelerator pedal position sensor, repairing damaged wiring, or reprogramming/replacing the ECM if necessary.
7. How much does it cost to fix a P2123 code on a 2010 Nissan Altima?
The cost can vary but typically ranges from $100 to $300 for parts and labor, depending on whether the sensor or wiring needs replacement.
8. Can cleaning the accelerator pedal position sensor fix the P2123 code?
In some cases, cleaning the sensor and connectors might resolve the issue, but replacement is often required if the sensor is faulty.
9. What tools are needed to troubleshoot the P2123 code?
You’ll need a digital multimeter, an OBDII scan tool, and possibly a wiring diagram for the accelerator pedal position sensor circuit.
10. Is the P2123 code a common issue in the 2010 Nissan Altima?
While not extremely common, it can occur due to wear and tear in the accelerator pedal position sensor or related wiring over time.
Discuss the causes and fixes for P2123 2010 Nissan Altima Sedan OBDII Code
Code P2123 2010 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.