P2123 2010 Honda Accord Code - Accelerator Pedal Position Sensor 'A' Throttle Position Sensor 'D' Circuit High Voltage
Quick Answer
The diagnostic trouble code P2123 for a 2010 Honda Accord refers to an issue with the Accelerator Pedal Position Sensor 'A' Throttle Position Sensor 'D' Circuit High Voltage. Common causes include Faulty accelerator pedal position sensor, Faulty throttle position sensor, Wiring or connector issues in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2123 2010 Honda Accord indicates Accelerator Pedal Position Sensor 'A' Throttle Position Sensor 'D' Circuit High Voltage.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Faulty throttle position sensor, Wiring or connector issues in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2123 2010 Honda Accord Description
The diagnostic trouble code P2123 for a 2010 Honda Accord refers to an issue with the Accelerator Pedal Position Sensor 'A' Throttle Position Sensor 'D' Circuit High Voltage. This code indicates that there is a problem with the voltage signal coming from the accelerator pedal position sensor and throttle position sensor, which are crucial components for the vehicle's electronic throttle control system.
Common Causes of P2123 2010 Honda Accord
- Faulty accelerator pedal position sensor
- Faulty throttle position sensor
- Wiring or connector issues in the sensor circuit
- ECM malfunction
- Corrosion or damage to sensor components
Symptoms of P2123 2010 Honda Accord
- Reduced engine power
- Acceleration hesitation or delay
- Check Engine Light illuminated
- Poor fuel efficiency
- Vehicle stalling or rough idling
How to Fix P2123 2010 Honda Accord
- Diagnose the issue using a diagnostic scanner to confirm the P2123 code and pinpoint the exact cause of the high voltage signal.
- Inspect the accelerator pedal position sensor and throttle position sensor for any signs of damage or wear. Replace any faulty sensors.
- Check the wiring and connectors in the sensor circuit for any breaks, corrosion, or loose connections. Repair or replace as needed.
- Clear the trouble code from the ECM memory and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, further diagnostics may be required to identify any underlying issues with the ECM or other related components.
Cost to Fix P2123 2010 Honda Accord
The typical repair costs for addressing the P2123 code on a 2010 Honda Accord can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, replacing a faulty accelerator pedal position sensor or throttle position sensor can range from $100 to $300 each, including parts and labor. Wiring repairs or connector replacements may add to the overall cost.
Need more information about the P2123 2010 Honda Accord code?
Need more information on how to fix the P2123 2010 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2123 2010 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2123 2010 Honda Accord Code
1. What does the OBDII code P2123 indicate on a 2010 Honda Accord?
The code P2123 indicates that the Accelerator Pedal Position Sensor 'A' Throttle Position Sensor 'D' Circuit has detected a higher than normal voltage. This suggests a potential issue with the accelerator pedal position sensor or its circuit.
2. What are common symptoms of the P2123 code in a 2010 Honda Accord?
Common symptoms include erratic or unresponsive throttle response, engine stalling or hesitating, and the check engine light turning on. The vehicle may also enter a limp mode to prevent further damage.
3. What causes the P2123 code to be triggered in a 2010 Honda Accord?
Causes can include a faulty accelerator pedal position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).
4. How can I diagnose the P2123 code on my 2010 Honda Accord?
Diagnosis should start with a visual inspection of the accelerator pedal position sensor and associated wiring for any obvious signs of damage or disconnection. Use an OBDII scanner to check for additional codes that might indicate related issues, and consider using a multimeter to verify the sensor's voltage output.
5. What steps should be taken to repair the issue causing the P2123 code in a 2010 Honda Accord?
Repairs may involve replacing the faulty accelerator pedal position sensor, repairing or replacing damaged wiring, or in some cases, reprogramming or replacing the engine control module.
6. Is it safe to drive my 2010 Honda Accord with the P2123 code?
Driving with this code is not recommended as it can lead to unpredictable vehicle behavior, such as sudden stalling or reduced engine power, which can compromise your safety and that of others on the road.
7. Can the P2123 code affect the fuel economy of my 2010 Honda Accord?
Yes, this code can affect the fuel economy. Issues with the throttle position sensor can lead to improper air-fuel mixture and engine performance, which in turn can reduce fuel efficiency.
8. What tools are required to diagnose and repair the P2123 code in a 2010 Honda Accord?
Tools needed may include an OBDII scanner, a multimeter for electrical testing, and basic hand tools for accessing and replacing components.
9. Could the P2123 code be triggered by an electrical short in the 2010 Honda Accord?
Yes, an electrical short in the circuit of the accelerator pedal position sensor can trigger this code. Inspecting and repairing any short circuits or damaged insulation on the wiring is crucial.
10. How often do accelerator pedal position sensors fail, causing the P2123 code?
While not exceedingly common, failures can occur due to wear and tear or damage from environmental factors like moisture or heat. Regular vehicle maintenance and inspections can help catch and address issues before they lead to sensor failure.
Discuss the causes and fixes for P2123 2010 Honda Accord OBDII Code
Code P2123 2010 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.