P2122 Scion Code - Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low
Quick Answer
The P2122 code for Scion vehicles indicates a problem with the Throttle Pedal Position Sensor/Switch 'D' Circuit Input being low. Common causes include Faulty throttle pedal position sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2122 Scion indicates Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low.
- Common causes
- Common causes include Faulty throttle pedal position sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2122 Scion Description
The P2122 code for Scion vehicles indicates a problem with the Throttle Pedal Position Sensor/Switch 'D' Circuit Input being low. This means that the voltage signal from the throttle pedal position sensor or switch is below the expected range, which can lead to a variety of performance issues in the vehicle. The throttle pedal position sensor is a crucial component that communicates the position of the throttle pedal to the engine control module (ECM), allowing the ECM to adjust the throttle opening accordingly. When the sensor signal is low, it can cause the engine to respond incorrectly to throttle inputs, resulting in poor acceleration, rough idling, and potentially stalling.
Common Causes of P2122 Scion
- Faulty throttle pedal position sensor
- Damaged wiring or connectors in the sensor circuit
- Malfunctioning ECM
- Issues with the throttle body
- Electrical interference or corrosion in the sensor circuit
Symptoms of P2122 Scion
- Reduced engine power or acceleration
- Rough idling or stalling
- Difficulty maintaining speed
- Illuminated Check Engine Light
- Reduced fuel efficiency
How to Fix P2122 Scion
- Begin by diagnosing the specific cause of the P2122 code using a diagnostic scanner to pinpoint the faulty component.
- Inspect the throttle pedal position sensor, wiring, and connectors for any visible damage or corrosion.
- Test the sensor's voltage output using a multimeter to determine if it falls within the expected range.
- Replace the throttle pedal position sensor if it is found to be faulty, ensuring that the new sensor is calibrated correctly.
- Clear the diagnostic trouble codes from the ECM and test drive the vehicle to ensure that the issue has been resolved.
Cost to Fix P2122 Scion
The typical repair costs for addressing a P2122 code in a Scion vehicle can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. It is important to note that diagnosis time and labor rates at auto repair shops can vary significantly based on factors such as location, vehicle make and model, and engine type. Therefore, it is advisable to check with local shops for a more accurate estimate before proceeding with the repair.
Need more information about the P2122 Scion code?
Need more information on how to fix the P2122 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2122 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2122 Scion Code
1. What does the OBDII code P2122 mean on a Scion?
Code P2122 indicates a low input signal from the Throttle Pedal Position Sensor/Switch 'D' circuit, which monitors the position of the accelerator pedal.
2. What are the symptoms of a P2122 code on a Scion?
Common symptoms include reduced engine power, poor throttle response, activation of "limp mode," and the illumination of the check engine light.
3. What causes the P2122 code on a Scion?
Possible causes include a faulty throttle pedal position sensor, damaged wiring or connections, a malfunctioning ECM, or corroded electrical terminals.
4. Can I drive my Scion with a P2122 code?
Driving with a P2122 code is not recommended, as it can result in limited engine power and unsafe driving conditions due to throttle inconsistencies.
5. How do I fix a P2122 code on my Scion?
Repairs may include replacing the throttle pedal position sensor, repairing or replacing damaged wiring or connectors, cleaning corroded terminals, or reprogramming the ECM if needed.
6. How do I diagnose a P2122 code on my Scion?
Diagnosis typically involves checking the throttle pedal position sensor with a multimeter, inspecting wiring and connections for damage, and scanning the ECM for related codes.
7. How much does it cost to repair a P2122 code on a Scion?
Repair costs can range from $100 to $400, depending on whether the issue is a sensor replacement, wiring repair, or ECM reprogramming.
8. What happens if I ignore the P2122 code on my Scion?
Ignoring a P2122 code can lead to continued throttle response issues, reduced drivability, and potential safety hazards while driving.
9. Can a bad battery cause the P2122 code on a Scion?
While unlikely, a weak or bad battery could contribute to electrical issues that affect the throttle pedal position sensor circuit.
10. Will clearing the P2122 code fix the problem on my Scion?
Clearing the code may temporarily turn off the check engine light, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P2122 Scion OBDII Code
Code P2122 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.