P2122 RAM Code - Throttle/Pedal Position Sensor/Switch 'D' Circuit Low
Quick Answer
The P2122 diagnostic trouble code (DTC) indicates a problem with the Throttle/Pedal Position Sensor/Switch 'D' Circuit being lower than normal. Common causes include Faulty Throttle/Pedal Position Sensor/Switch 'D', Damaged wiring or connectors, Defective Engine Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2122 RAM indicates Throttle/Pedal Position Sensor/Switch 'D' Circuit Low.
- Common causes
- Common causes include Faulty Throttle/Pedal Position Sensor/Switch 'D', Damaged wiring or connectors, Defective Engine Control Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2122 RAM Description
The P2122 diagnostic trouble code (DTC) indicates a problem with the Throttle/Pedal Position Sensor/Switch 'D' Circuit being lower than normal. This sensor is crucial for the Engine Control Module to accurately calculate the correct throttle position and adjust fuel delivery and ignition timing accordingly. When the sensor reports a voltage signal lower than expected, it can lead to issues with engine performance, fuel efficiency, and overall drivability of the vehicle.
Common Causes of P2122 RAM
- Faulty Throttle/Pedal Position Sensor/Switch 'D'
- Damaged wiring or connectors
- Defective Engine Control Module
- Issues with the throttle body assembly
- Electrical problems such as shorts or open circuits
Symptoms of P2122 RAM
- Reduced engine power or acceleration
- Engine stalling or hesitation
- Rough idling or surging
- Illuminated Check Engine Light
- Difficulty maintaining speed or cruise control operation
How to Fix P2122 RAM
- Begin by diagnosing the root cause of the problem using a scan tool to confirm the P2122 code.
- Inspect the Throttle/Pedal Position Sensor/Switch 'D' and its wiring for any signs of damage or wear.
- Test the sensor's voltage output using a multimeter to ensure it is within the manufacturer's specifications.
- Replace the faulty Throttle/Pedal Position Sensor/Switch 'D' if necessary, and repair or replace any damaged wiring or connectors.
- Clear the DTCs from the vehicle's memory and perform a test drive to confirm that the issue has been resolved.
Cost to Fix P2122 RAM
The typical repair costs for addressing a P2122 code can vary depending on the specific vehicle make and model, as well as the extent of the issue. In general, replacing a Throttle/Pedal Position Sensor/Switch 'D' and addressing any associated wiring problems can range from $150 to $300 in parts and labor. However, it's important to note that diagnosis time and labor rates at auto repair shops can vary significantly based on location, with hourly rates typically ranging from $80 to $150. It's advisable to contact local repair shops for a more accurate cost estimate based on your specific vehicle and location.
Need more information about the P2122 RAM code?
Need more information on how to fix the P2122 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2122 RAM code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2122 RAM Code
1. What does the OBDII code P2122 mean on a RAM vehicle?
P2122 indicates a low voltage issue in the Throttle/Pedal Position Sensor/Switch "D" circuit, which is responsible for monitoring the accelerator pedal position.
2. What are the common symptoms of code P2122 in a RAM?
Symptoms may include reduced engine performance, the vehicle going into limp mode, unresponsive acceleration, and the illumination of the check engine light.
3. What causes the P2122 code to appear on a RAM?
Common causes include a faulty throttle or pedal position sensor, damaged wiring or connectors in the circuit, or issues with the engine control module (ECM).
4. Can I drive my RAM with the P2122 code active?
Driving with this code is not recommended as it can cause reduced performance, safety concerns, and potential further damage to the vehicle.
5. How do I diagnose the P2122 code on my RAM?
Diagnose by using a scan tool to confirm the code, inspecting the throttle or pedal position sensor, checking wiring and connectors for damage, and testing the circuit for proper voltage.
6. How do I fix the P2122 code on a RAM vehicle?
Repairs may include replacing the throttle or pedal position sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming/updating the ECM if necessary.
7. How much does it cost to repair the P2122 code on a RAM?
Repairs can cost between $100 and $300, depending on whether the issue is with the sensor, wiring, or ECM reprogramming.
8. Can a dirty throttle body cause the P2122 code on a RAM?
While rare, a dirty throttle body may indirectly contribute to sensor issues. Cleaning it can sometimes help but is not a guaranteed fix for this specific code.
9. How can I prevent the P2122 code from recurring on my RAM?
Regular maintenance, inspecting wiring and connectors for damage, and ensuring that sensors are clean and functioning properly can help prevent this code.
10. Does the P2122 code always mean the sensor is bad?
No, the P2122 code can also be caused by wiring issues, corroded connectors, or problems with the ECM, so proper diagnosis is essential.
Discuss the causes and fixes for P2122 RAM OBDII Code
Code P2122 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.