P2122 2013 Toyota RAV4 Code - Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low
Quick Answer
The P2122 diagnostic trouble code (DTC) for a 2013 Toyota RAV4 refers to the Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low. Common causes include Faulty throttle pedal position sensor, Wiring issues or poor electrical connections, Corrosion or contamination in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2122 2013 Toyota RAV4 indicates Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low.
- Common causes
- Common causes include Faulty throttle pedal position sensor, Wiring issues or poor electrical connections, Corrosion or contamination in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2122 2013 Toyota RAV4 Description
The P2122 diagnostic trouble code (DTC) for a 2013 Toyota RAV4 refers to the Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low. This code indicates that the Engine Control Module (ECM) has detected a lower than expected voltage signal from the throttle pedal position sensor or switch 'D'. The throttle pedal position sensor is a crucial component that communicates the position of the accelerator pedal to the ECM, allowing the vehicle to adjust the throttle accordingly. When the sensor detects a low voltage input, it can lead to various performance issues and potentially affect the drivability of the vehicle.
Common Causes of P2122 2013 Toyota RAV4
- Faulty throttle pedal position sensor
- Wiring issues or poor electrical connections
- Corrosion or contamination in the sensor circuit
- ECM software or hardware issues
- Mechanical issues affecting the throttle pedal assembly
Symptoms of P2122 2013 Toyota RAV4
- Reduced engine power
- Difficulty accelerating
- Rough idling or stalling
- Check Engine Light illuminated
- Reduced fuel efficiency
How to Fix P2122 2013 Toyota RAV4
- Begin by diagnosing the root cause of the issue using a scan tool to confirm the P2122 code and inspecting the throttle pedal position sensor and related wiring.
- If the sensor is faulty, replace it with a new one following the manufacturer's guidelines. Ensure proper calibration of the new sensor.
- Check for any wiring issues, corrosion, or poor connections in the sensor circuit. Repair or replace damaged wiring as needed.
- Clear the DTC from the ECM memory using the scan tool and perform a test drive to verify that the issue has been resolved.
- If the problem persists, further diagnostics may be required to identify any underlying ECM or mechanical issues.
Cost to Fix P2122 2013 Toyota RAV4
The typical repair costs for addressing a P2122 code on a 2013 Toyota RAV4 can vary depending on the specific cause of the issue. In general, replacing a faulty throttle pedal position sensor can cost between $100 and $200 for the part, with additional labor costs ranging from $100 to $200. Wiring repairs or ECM diagnostics may incur additional charges. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your location and vehicle specifics.
Need more information about the P2122 2013 Toyota RAV4 code?
Need more information on how to fix the P2122 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2122 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2122 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P2122 in a 2013 Toyota RAV4?
The common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.
2. What does the OBDII code P2122 in a 2013 Toyota RAV4 mean?
The code P2122 indicates an issue with the Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low in the vehicle's electronic throttle control system.
3. What are the possible causes of OBDII code P2122 in a 2013 Toyota RAV4?
Potential causes of this code include a faulty throttle position sensor, damaged wiring or connectors in the throttle pedal circuit, or issues with the engine control module.
4. How can I diagnose the Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low issue in my 2013 Toyota RAV4?
You can use a scan tool to read the OBDII code P2122 and then inspect the throttle pedal position sensor, wiring connections, and related components for any visible damage.
5. Can I drive my 2013 Toyota RAV4 with OBDII code P2122?
It is not recommended to drive the vehicle with this code as it can lead to unsafe driving conditions due to potential loss of engine power or control.
6. How can I repair OBDII code P2122 in my 2013 Toyota RAV4?
Repair options include replacing the faulty throttle position sensor, repairing damaged wiring or connectors, or resetting the engine control module after addressing the issue.
7. Will resetting the OBDII code P2122 in my 2013 Toyota RAV4 make it go away permanently?
Resetting the code may temporarily clear the warning light, but if the underlying issue is not fixed, the code is likely to reappear when the problem is detected again.
8. How much does it cost to fix OBDII code P2122 in a 2013 Toyota RAV4?
The cost of fixing this issue can vary depending on the exact cause and whether you perform the repairs yourself or take the vehicle to a mechanic. Costs may include parts and labor charges.
9. Can a DIY enthusiast fix OBDII code P2122 in a 2013 Toyota RAV4?
If you have the necessary tools, knowledge, and experience working on automotive systems, you may be able to diagnose and repair the issue yourself. Otherwise, it's best to seek professional help.
10. How often does OBDII code P2122 occur in a 2013 Toyota RAV4?
The occurrence of this code can vary depending on the vehicle's usage, maintenance, and other factors. If the issue is not addressed promptly, it can lead to further complications in the throttle control system.
Discuss the causes and fixes for P2122 2013 Toyota RAV4 OBDII Code
Code P2122 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.