P2122 2011 Nissan Rogue Code - Accelerator Pedal Position Sensor Circuit Range/Performance
Quick Answer
The P2122 code on a 2011 Nissan Rogue indicates a problem with the Accelerator Pedal Position Sensor Circuit Range/Performance. Common causes include Faulty accelerator pedal position sensor, Wiring or connection issues in the sensor circuit, Corrosion or damage to sensor components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2122 2011 Nissan Rogue indicates Accelerator Pedal Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Wiring or connection issues in the sensor circuit, Corrosion or damage to sensor components.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2122 2011 Nissan Rogue Description
The P2122 code on a 2011 Nissan Rogue indicates a problem with the Accelerator Pedal Position Sensor Circuit Range/Performance. This sensor is responsible for detecting the position of the accelerator pedal and sending this information to the engine control module (ECM) to adjust fuel delivery and engine performance accordingly. When this circuit is not functioning within the expected range or performance parameters, it can lead to issues with the vehicle's acceleration and overall drivability.
Common Causes of P2122 2011 Nissan Rogue
- Faulty accelerator pedal position sensor.
- Wiring or connection issues in the sensor circuit.
- Corrosion or damage to sensor components.
- ECM software or hardware problems.
- Environmental factors such as moisture or debris affecting sensor operation.
Symptoms of P2122 2011 Nissan Rogue
- Reduced engine power or lack of response when pressing the accelerator pedal.
- Sudden changes in engine RPM while driving.
- Illumination of the Check Engine Light on the dashboard.
- Difficulty maintaining a consistent speed while driving.
- Stalling or hesitation during acceleration.
How to Fix P2122 2011 Nissan Rogue
- Begin by diagnosing the specific cause of the P2122 code using a diagnostic scanner to pinpoint the issue.
- Inspect the accelerator pedal position sensor and its wiring for any signs of damage or corrosion.
- Test the sensor's functionality and resistance to ensure it is operating within specifications.
- If the sensor is faulty, replace it with a new OEM unit and recalibrate as necessary.
- Clear the error code from the ECM memory and test drive the vehicle to confirm that the issue has been resolved.
Cost to Fix P2122 2011 Nissan Rogue
The cost of repairing a P2122 code on a 2011 Nissan Rogue can vary depending on the root cause of the issue. On average, replacing a faulty accelerator pedal position sensor can range from $100 to $300 for the part alone. Labor costs may add an additional $100 to $200, bringing the total repair cost to approximately $200 to $500. It's important to consider additional diagnostic fees and taxes that may affect the final price.
Need more information about the P2122 2011 Nissan Rogue code?
Need more information on how to fix the P2122 2011 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2122 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2122 2011 Nissan Rogue Code
1. What does the OBDII code P2122 mean on a 2011 Nissan Rogue?
P2122 indicates a low input signal from the accelerator pedal position (APP) sensor, suggesting a possible issue with the sensor or its circuit.
2. What are the common symptoms of the P2122 code?
Symptoms may include reduced engine performance, the throttle not responding properly, the Check Engine Light illuminating, or the vehicle entering "limp mode."
3. What causes the P2122 code to appear?
Common causes include a faulty APP sensor, damaged or corroded wiring, loose electrical connections, or issues with the engine control module (ECM).
4. Can I drive my 2011 Nissan Rogue with the P2122 code?
Driving is possible but not recommended, as the vehicle may have limited throttle response or reduced power, potentially posing safety risks.
5. How do I troubleshoot the P2122 code?
Inspect the APP sensor, check the wiring and connectors for damage or corrosion, and use a multimeter to test the sensor’s voltage output.
6. How is the P2122 code typically repaired?
Repairs may include replacing the APP sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming/updating the engine control module (ECM).
7. How much does it cost to fix the P2122 code?
Repair costs vary but typically range from $150 to $400, depending on whether the APP sensor, wiring, or ECM needs replacement or repair.
8. Can a dirty throttle body cause the P2122 code?
While a dirty throttle body can cause performance issues, it’s not a direct cause of the P2122 code, which is specific to the APP sensor circuit.
9. Will clearing the code with a scan tool fix the issue?
Clearing the code may temporarily turn off the Check Engine Light, but the underlying issue must be resolved to prevent the code from returning.
10. How can I prevent the P2122 code from recurring?
Regularly inspect and maintain the accelerator pedal assembly, wiring, and connectors, and address any issues with the APP sensor promptly.
Discuss the causes and fixes for P2122 2011 Nissan Rogue OBDII Code
Code P2122 2011 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.