P2122 2010 Nissan Rogue Code - Accelerator Pedal Position Sensor Circuit Range/Performance
Quick Answer
The P2122 diagnostic trouble code (DTC) for a 2010 Nissan Rogue refers to the Accelerator Pedal Position Sensor Circuit Range/Performance. Common causes include A faulty accelerator pedal position sensor, Damaged or corroded wiring/connectors in the sensor circuit, Issues with the ECM receiving or interpreting signals from the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2122 2010 Nissan Rogue indicates Accelerator Pedal Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include A faulty accelerator pedal position sensor, Damaged or corroded wiring/connectors in the sensor circuit, Issues with the ECM receiving or interpreting signals from the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2122 2010 Nissan Rogue Description
The P2122 diagnostic trouble code (DTC) for a 2010 Nissan Rogue refers to the Accelerator Pedal Position Sensor Circuit Range/Performance. This code indicates that there is a problem with the accelerator pedal position sensor, which is responsible for sending signals to the engine control module (ECM) regarding the position of the accelerator pedal. The ECM uses this information to determine the appropriate fuel delivery and ignition timing for optimal engine performance.
Common Causes of P2122 2010 Nissan Rogue
- A faulty accelerator pedal position sensor.
- Damaged or corroded wiring/connectors in the sensor circuit.
- Issues with the ECM receiving or interpreting signals from the sensor.
- Environmental factors such as moisture or debris affecting sensor operation.
- Wear and tear over time leading to sensor degradation.
Symptoms of P2122 2010 Nissan Rogue
- Poor acceleration or lack of response when pressing the accelerator pedal.
- Engine hesitation or surging during acceleration.
- Illumination of the Check Engine Light on the dashboard.
- Vehicle going into limp mode, limiting acceleration and speed.
- Rough idling or stalling when coming to a stop.
How to Fix P2122 2010 Nissan Rogue
- Begin by conducting a thorough inspection of the accelerator pedal position sensor and its wiring/connectors for any visible damage or corrosion.
- Use a multimeter to test the sensor's resistance and voltage output to determine if it is functioning within specifications.
- If the sensor is faulty, replace it with a new one following the manufacturer's guidelines.
- Clear the DTC from the ECM's memory using a scan tool and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, further diagnostic testing may be necessary to identify any underlying issues with the ECM or wiring.
Cost to Fix P2122 2010 Nissan Rogue
The typical repair costs for addressing a P2122 code on a 2010 Nissan Rogue can vary depending on the specific cause of the issue. In general, replacing the accelerator pedal position sensor can range from $100 to $300, including parts and labor. Additional costs may apply if further diagnostic testing or repairs are needed. It is advisable to consult with a trusted mechanic or auto repair shop to obtain a more accurate estimate based on the specific circumstances of your vehicle. Keep in mind that labor rates and parts prices can vary based on location, vehicle make and model, and other factors.
Need more information about the P2122 2010 Nissan Rogue code?
Need more information on how to fix the P2122 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2122 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2122 2010 Nissan Rogue Code
1. What does the OBDII code P2122 for a 2010 Nissan Rogue indicate?
The OBDII code P2122 in a 2010 Nissan Rogue specifically points to an issue with the Accelerator Pedal Position Sensor Circuit Range/Performance.
2. What are some common symptoms of the P2122 code in a 2010 Nissan Rogue?
Common symptoms associated with the P2122 code in a 2010 Nissan Rogue include decreased engine performance, unresponsive throttle, and potentially even the vehicle going into "limp mode."
3. What are the possible causes of the P2122 code in a 2010 Nissan Rogue?
The P2122 code in a 2010 Nissan Rogue can be triggered by a faulty accelerator pedal position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module.
4. How can I diagnose the P2122 code in my 2010 Nissan Rogue?
To diagnose the P2122 code in a 2010 Nissan Rogue, you can use an OBDII scanner to read the code and then inspect the accelerator pedal position sensor, its wiring, and connectors for any signs of damage or malfunction.
5. Can I continue driving my 2010 Nissan Rogue with the P2122 code present?
It is not recommended to drive your 2010 Nissan Rogue with the P2122 code present, as it can lead to further damage and potential safety hazards due to the unresponsive throttle.
6. How can I repair the P2122 code in my 2010 Nissan Rogue?
Repairing the P2122 code in a 2010 Nissan Rogue may involve replacing the accelerator pedal position sensor, repairing any damaged wiring or connectors, or resetting the engine control module.
7. Is it possible to reset the P2122 code in a 2010 Nissan Rogue without repairs?
While you can clear the P2122 code with an OBDII scanner, it is essential to address the underlying issue causing the code to prevent it from reoccurring.
8. How much does it cost to fix the P2122 code in a 2010 Nissan Rogue?
The cost of fixing the P2122 code in a 2010 Nissan Rogue can vary depending on the extent of the issue, but it may involve parts and labor costs for sensor replacement or wiring repairs.
9. Can a DIY enthusiast fix the P2122 code issue in a 2010 Nissan Rogue?
If you have the necessary tools, knowledge, and experience, you may be able to address the P2122 code issue in a 2010 Nissan Rogue yourself by following repair guides or tutorials.
10. How often does the P2122 code occur in a 2010 Nissan Rogue?
The P2122 code in a 2010 Nissan Rogue can occur sporadically due to sensor or wiring issues, but addressing it promptly is crucial to prevent further complications.
Discuss the causes and fixes for P2122 2010 Nissan Rogue OBDII Code
Code P2122 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.