P2122 2010 Nissan Altima Sedan Code - Accelerator Pedal Position Sensor Circuit Range/Performance
Quick Answer
The P2122 diagnostic trouble code for a 2010 Nissan Altima Sedan indicates a problem with the Accelerator Pedal Position Sensor Circuit Range/Performance. Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or poor connections in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2122 2010 Nissan Altima Sedan indicates Accelerator Pedal Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or poor connections in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2122 2010 Nissan Altima Sedan Description
The P2122 diagnostic trouble code for a 2010 Nissan Altima Sedan indicates a problem with the Accelerator Pedal Position Sensor Circuit Range/Performance. This sensor is responsible for monitoring the position of the accelerator pedal and sending this information to the engine control module (ECM). The ECM uses this data to determine the appropriate fuel delivery and ignition timing for optimal engine performance.
Common Causes of P2122 2010 Nissan Altima Sedan
- Faulty accelerator pedal position sensor
- Damaged wiring or connectors in the sensor circuit
- Corrosion or poor connections in the sensor circuit
- Issues with the ECM
- Environmental factors such as moisture or debris affecting the sensor
Symptoms of P2122 2010 Nissan Altima Sedan
- Reduced engine power
- Difficulty accelerating
- Engine stalling
- Check Engine Light illuminated
- Rough idling
How to Fix P2122 2010 Nissan Altima Sedan
- Begin by diagnosing the specific cause of the P2122 code using a diagnostic scanner to pinpoint the issue.
- Inspect the accelerator pedal position sensor and its wiring for any signs of damage or corrosion.
- Test the sensor's output voltage and resistance to determine if it is functioning correctly.
- Replace the accelerator pedal position sensor if it is found to be faulty, ensuring proper installation and calibration.
- Clear the diagnostic trouble codes from the ECM and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P2122 2010 Nissan Altima Sedan
The typical repair costs for addressing a P2122 code on a 2010 Nissan Altima Sedan can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate. Keep in mind that rates may be higher at dealerships or in metropolitan areas, while independent shops may offer more affordable pricing.
Need more information about the P2122 2010 Nissan Altima Sedan code?
Need more information on how to fix the P2122 2010 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2122 2010 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2122 2010 Nissan Altima Sedan Code
1. What does the OBDII code P2122 mean on a 2010 Nissan Altima Sedan?
P2122 indicates a low voltage signal from the Accelerator Pedal Position (APP) Sensor, which monitors the position of the gas pedal to control the throttle.
2. What are the common symptoms of code P2122 in a 2010 Nissan Altima?
Symptoms may include reduced engine power, hesitation during acceleration, the throttle not responding properly, or the vehicle entering "limp mode."
3. What causes the P2122 code to appear in a Nissan Altima?
Common causes include a faulty APP sensor, damaged or corroded wiring, a poor electrical connection, or a malfunction in the throttle control system.
4. How can I fix the P2122 code on my 2010 Nissan Altima?
Start by checking the APP sensor and its wiring for damage or corrosion. If no issues are found, replacing the APP sensor is often necessary.
5. Can I drive my 2010 Nissan Altima with the P2122 code?
Driving with this code is not recommended, as it may cause reduced throttle response or the vehicle entering limp mode, potentially creating unsafe driving conditions.
6. How do I diagnose the P2122 code in my Nissan Altima?
Use a scan tool to confirm the code, inspect the APP sensor and wiring for visible damage, and test the sensor's voltage output against manufacturer specifications.
7. How much does it cost to repair the P2122 code on a 2010 Nissan Altima?
Repair costs can vary but typically range from $100 to $300, depending on whether the APP sensor needs replacement or if wiring repairs are necessary.
8. Can a dirty throttle body cause the P2122 code on a 2010 Nissan Altima?
A dirty throttle body is not a direct cause of P2122, but it can contribute to throttle issues. Cleaning it may help if paired with other repairs.
9. What tools are needed to troubleshoot the P2122 code?
You’ll need an OBDII scanner, a multimeter to test voltage, and possibly wiring diagrams specific to the 2010 Nissan Altima.
10. Does the P2122 code require reprogramming after repairs?
In most cases, no reprogramming is needed, but after replacing the APP sensor, clear the code and test drive to ensure the issue is resolved.
Discuss the causes and fixes for P2122 2010 Nissan Altima Sedan OBDII Code
Code P2122 2010 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.