Engine-Codes.com
Engine-Codes – Ford – P2122 2008 Ford Fusion

P2122 2008 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'D' Circuit Low

Quick Answer

The P2122 diagnostic trouble code (DTC) for a 2008 Ford Fusion indicates an issue with the Throttle/Pedal Position Sensor/Switch 'D' Circuit being low. Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or contamination in the sensor connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2122 2008 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'D' Circuit Low.
Common causes
Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or contamination in the sensor connections.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2122 2008 Ford Fusion Description

The P2122 diagnostic trouble code (DTC) for a 2008 Ford Fusion indicates an issue with the Throttle/Pedal Position Sensor/Switch 'D' Circuit being low. This sensor is crucial for the proper functioning of the vehicle's throttle system, as it helps regulate the amount of air and fuel entering the engine. When the sensor detects that the voltage signal is lower than expected, it triggers the P2122 code, signaling a potential problem with the sensor or its circuit.

OBDII Code P2122 2008 Ford Fusion - Throttle/Pedal Position Sensor/Switch 'D' Circuit Low
P2122 2008 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'D' Circuit Low

Common Causes of P2122 2008 Ford Fusion

  1. Faulty throttle position sensor.
  2. Damaged wiring or connectors in the sensor circuit.
  3. Corrosion or contamination in the sensor connections.
  4. Issues with the engine control module (ECM).
  5. Environmental factors such as extreme temperatures affecting sensor performance.

Symptoms of P2122 2008 Ford Fusion

  1. Poor acceleration or lack of response when pressing the gas pedal.
  2. Rough idling or stalling while driving.
  3. Check Engine Light illuminated on the dashboard.
  4. Reduced fuel efficiency.
  5. Vehicle going into "limp mode" to prevent further damage.

How to Fix P2122 2008 Ford Fusion

  1. Begin by conducting a thorough inspection of the throttle position sensor and its wiring connections.
  2. Test the sensor's voltage output using a multimeter to determine if it is within the manufacturer's specified range.
  3. Replace the throttle position sensor if it is found to be faulty or not functioning correctly.
  4. Check and repair any damaged wiring or connectors in the sensor circuit.
  5. Clear the DTC and perform a test drive to ensure the issue has been resolved.

Cost to Fix P2122 2008 Ford Fusion

The typical repair costs for addressing a P2122 code on a 2008 Ford Fusion can range from $150 to $300, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Auto repair shops commonly charge between $80 and $150 per hour for labor, but rates may be higher in metropolitan areas or at dealerships, while independent shops may charge less. It's recommended to check local rates for a more accurate estimate of the repair costs.

Need more information about the P2122 2008 Ford Fusion code?

Need more information on how to fix the P2122 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2122 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2122 2008 Ford Fusion Code

1. What are the common symptoms of OBDII code P2122 in a 2008 Ford Fusion?

The common symptoms of code P2122 include reduced engine power, throttle response issues, and the vehicle going into limp mode.

2. What does the Throttle/Pedal Position Sensor/Switch 'D' Circuit Low mean in a 2008 Ford Fusion?

The code P2122 indicates that there is a low voltage condition in the circuit related to the throttle or pedal position sensor/switch 'D'.

3. What are the possible causes of OBDII code P2122 in a 2008 Ford Fusion?

Possible causes of code P2122 include a faulty throttle position sensor, damaged wiring or connectors, a defective pedal position sensor, or a problem with the Engine Control Module (ECM).

4. How can I diagnose the Throttle/Pedal Position Sensor/Switch 'D' Circuit Low in my 2008 Ford Fusion?

Diagnosing code P2122 involves using a scan tool to retrieve the code, checking the throttle and pedal position sensor readings, inspecting wiring and connectors for damage, and testing the sensor circuit.

5. Can I continue driving my 2008 Ford Fusion with OBDII code P2122?

It is not recommended to drive the vehicle with code P2122 as it can lead to unsafe driving conditions and potential damage to the engine or other components.

6. How can I repair OBDII code P2122 in a 2008 Ford Fusion?

To repair code P2122, you may need to replace the faulty throttle position sensor, repair damaged wiring or connectors, replace the pedal position sensor, or reprogram the ECM.

7. Is it possible to reset OBDII code P2122 in a 2008 Ford Fusion?

Resetting the code may temporarily clear it, but if the underlying issue is not addressed, the code is likely to reappear. It's essential to diagnose and repair the root cause of the problem.

8. How much does it typically cost to fix OBDII code P2122 in a 2008 Ford Fusion?

The cost of fixing code P2122 can vary depending on the cause of the issue, the parts needed for repair, and labor costs. It is recommended to consult with a mechanic for an accurate estimate.

9. Can a DIY enthusiast repair OBDII code P2122 in a 2008 Ford Fusion?

While some aspects of diagnosing and repairing code P2122 can be tackled by a DIY enthusiast, it may require specialized tools and expertise. It's advisable to seek professional help if unsure.

10. How can I prevent OBDII code P2122 from appearing in my 2008 Ford Fusion in the future?

Regular maintenance, such as checking and cleaning throttle components, inspecting wiring for damage, and addressing any issues promptly, can help prevent code P2122 from recurring.

Discuss the causes and fixes for P2122 2008 Ford Fusion OBDII Code

Submit a New Comment

Code P2122 2008 Ford Fusion comments

No comments found for this page.