P2119 2010 NISSAN PATHFINDER - Electric Throttle Control Actuator
P2119 2010 NISSAN PATHFINDER Possible Causes
- Faulty Electric Throttle Control Actuator
- Throttle plate sticking due to carbon build-up
- Electric Throttle Control Actuator harness is open or shorted
- Electric Throttle Control Actuator poor electrical circuit connection
How is the P2119 2010 NISSAN PATHFINDER code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the P2119 2010 NISSAN PATHFINDER code
Labor: 1.0The cost to diagnose the P2119 2010 NISSAN PATHFINDER code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
When is the code detected?The P2119 code is detected when electric throttle control actuator does not function properly due to the return spring malfunction or Engine Control Module (ECM) detect the throttle valve is stuck open.
- Engine Light ON (or Service Engine Soon Warning Light)
- No throttle pedal response
P2119 2010 NISSAN PATHFINDER MeaningElectric throttle control actuator consists of throttle control motor, throttle position sensor, etc. The throttle control motor is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve.
The throttle position sensor detects the throttle valve position, and feeds the voltage signal to the ECM. The ECM judges the current opening angle of the throttle valve and controls the throttle valve opening angle in response to driving conditions via the throttle control motor.
More InformationNeed more information on how to fix the P2119 2010 NISSAN PATHFINDER code?
Get Access to Factory Service Manuals