P2119 2010 Nissan Altima Sedan Code - Electric Throttle Control Actuator
Quick Answer
The P2119 code on a 2010 Nissan Altima Sedan indicates a problem with the Electric Throttle Control Actuator. Common causes include Dirty or clogged throttle body, Faulty throttle position sensor, Wiring or electrical issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2119 2010 Nissan Altima Sedan indicates Electric Throttle Control Actuator.
- Common causes
- Common causes include Dirty or clogged throttle body, Faulty throttle position sensor, Wiring or electrical issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2119 2010 Nissan Altima Sedan Description
The P2119 code on a 2010 Nissan Altima Sedan indicates a problem with the Electric Throttle Control Actuator. This component is responsible for controlling the amount of air entering the engine, which is crucial for maintaining the proper air-fuel mixture for combustion. When this actuator malfunctions, it can lead to issues with engine performance, fuel efficiency, and overall drivability.
Common Causes of P2119 2010 Nissan Altima Sedan
- Dirty or clogged throttle body
- Faulty throttle position sensor
- Wiring or electrical issues
- Vacuum leaks
- Carbon buildup in the throttle body
Symptoms of P2119 2010 Nissan Altima Sedan
- Rough idling or stalling
- Hesitation or lack of response when accelerating
- Reduced fuel efficiency
- Check Engine Light illuminated
- Loss of power or engine performance
How to Fix P2119 2010 Nissan Altima Sedan
- Diagnose the issue using a scan tool to confirm the P2119 code and identify the specific cause of the Electric Throttle Control Actuator malfunction.
- Inspect the throttle body, throttle position sensor, and related wiring for any signs of damage, wear, or contamination.
- Clean the throttle body and throttle position sensor to remove any dirt, debris, or carbon buildup that may be affecting their operation.
- Test the throttle body and throttle position sensor for proper function and adjust or replace them as needed.
- Clear the diagnostic trouble codes from the ECU and perform a test drive to ensure that the issue has been resolved.
Cost to Fix P2119 2010 Nissan Altima Sedan
The typical repair costs for addressing a P2119 code related to the Electric Throttle Control Actuator on a 2010 Nissan Altima Sedan can range from $200 to $500, including parts and labor. However, it's important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops commonly charge between $80 and $150 per hour for labor. Rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It's advisable to check local rates for a more precise estimate.
When is the Code Detected?
Need more information about the P2119 2010 Nissan Altima Sedan code?
Need more information on how to fix the P2119 2010 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2119 2010 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2119 2010 Nissan Altima Sedan Code
1. What does the OBDII code P2119 mean on a 2010 Nissan Altima Sedan?
P2119 indicates a problem with the Electric Throttle Control Actuator, specifically that the throttle plate is not opening or closing as commanded by the engine control module (ECM).
2. What are the common symptoms of a P2119 code?
Symptoms include reduced engine performance, difficulty accelerating, the engine going into "limp mode," poor fuel efficiency, and the check engine light turning on.
3. What causes the P2119 code to appear in a 2010 Nissan Altima?
The most common causes are a malfunctioning throttle body, issues with the throttle position sensor, wiring or connector problems, or a failed ECM.
4. Can I still drive my 2010 Nissan Altima with a P2119 code?
Driving with a P2119 code is not recommended as it may lead to reduced performance, safety issues, and potential damage to the engine or other components.
5. How is the P2119 code diagnosed?
A technician will use an OBDII scanner to confirm the code, inspect the throttle body and wiring, check the throttle position sensor, and test the ECM for proper operation.
6. How do I fix the P2119 code on a 2010 Nissan Altima?
Repairs may include cleaning or replacing the throttle body, repairing damaged wires or connectors, or replacing the throttle position sensor or ECM if necessary.
7. How much does it cost to fix a P2119 code?
The cost varies depending on the issue, but throttle body cleaning or replacement can range from $150 to $600, while ECM replacement may cost $800 or more.
8. Can a dirty throttle body cause the P2119 code?
Yes, a dirty or clogged throttle body can prevent the throttle plate from moving properly, triggering the P2119 code.
9. Will clearing the P2119 code solve the problem?
Clearing the code may turn off the check engine light temporarily, but the issue will return unless the underlying cause is addressed.
10. How can I prevent the P2119 code from occurring?
Regular maintenance, such as cleaning the throttle body and inspecting wiring and connectors, can help prevent issues with the Electric Throttle Control Actuator.
Discuss the causes and fixes for P2119 2010 Nissan Altima Sedan OBDII Code
Code P2119 2010 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.