P2118 2010 Honda Accord Code - Throttle Actuator Control Motor Current Range/Performance
Quick Answer
The P2118 code for a 2010 Honda Accord indicates a problem with the Throttle Actuator Control Motor Current Range/Performance. Common causes include Faulty throttle actuator control motor, Wiring issues or loose connections, Dirty throttle body. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2118 2010 Honda Accord indicates Throttle Actuator Control Motor Current Range/Performance.
- Common causes
- Common causes include Faulty throttle actuator control motor, Wiring issues or loose connections, Dirty throttle body.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2118 2010 Honda Accord Description
The P2118 code for a 2010 Honda Accord indicates a problem with the Throttle Actuator Control Motor Current Range/Performance. This means that the Engine Control Module (ECM) has detected that the current flowing to the throttle actuator control motor is outside of the expected range. The throttle actuator control motor is responsible for controlling the opening and closing of the throttle plate, which regulates the airflow into the engine. When this component is not functioning properly, it can lead to issues with acceleration, fuel efficiency, and overall engine performance.
Common Causes of P2118 2010 Honda Accord
- Faulty throttle actuator control motor
- Wiring issues or loose connections
- Dirty throttle body
- Throttle position sensor malfunction
- ECM software malfunction
Symptoms of P2118 2010 Honda Accord
- Reduced engine power
- Engine stalling or hesitation
- Poor acceleration
- Check Engine Light illuminated
- Rough idling
How to Fix P2118 2010 Honda Accord
- Perform a thorough inspection of the throttle actuator control motor and wiring connections.
- Clean the throttle body to ensure smooth operation.
- Test the throttle position sensor and replace if necessary.
- Reset the ECM and perform a throttle relearn procedure.
- If the issue persists, consider replacing the throttle actuator control motor.
Cost to Fix P2118 2010 Honda Accord
The cost of repairing a P2118 code on a 2010 Honda Accord can vary depending on the specific cause of the issue. In general, the cost of parts for this repair could range from $100 to $300, with labor costs adding an additional $100 to $200. Keep in mind that prices may vary based on location and the specific repair shop. It is recommended to consult with a professional mechanic to get an accurate estimate for your particular situation.
When is the Code Detected?
Need more information about the P2118 2010 Honda Accord code?
Need more information on how to fix the P2118 2010 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2118 2010 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2118 2010 Honda Accord Code
1. What are the common symptoms of OBDII code P2118 in a 2010 Honda Accord?
- Common symptoms include a check engine light, reduced engine power, difficulty accelerating, and potential stalling.
2. What does the OBDII code P2118 for a 2010 Honda Accord indicate?
- The code P2118 indicates an issue with the Throttle Actuator Control Motor Current Range/Performance.
3. What are some possible causes of OBDII code P2118 in a 2010 Honda Accord?
- Possible causes include a malfunctioning throttle actuator control motor, wiring issues, poor electrical connections, or a faulty throttle body.
4. How can I diagnose the OBDII code P2118 in my 2010 Honda Accord?
- Diagnostic steps may include checking the throttle actuator control motor, inspecting wiring and connections, and using a scan tool to monitor sensor data.
5. Is it safe to continue driving my 2010 Honda Accord with OBDII code P2118?
- It is not recommended to drive the vehicle with this code as it can lead to performance issues and potentially unsafe driving conditions.
6. Can I repair OBDII code P2118 in my 2010 Honda Accord myself?
- Depending on your skill level, you may be able to address the issue by checking and cleaning electrical connections, replacing the throttle actuator control motor, or seeking professional help if needed.
7. How much does it typically cost to repair OBDII code P2118 in a 2010 Honda Accord?
- Repair costs can vary based on the exact cause of the issue, but expenses may include parts and labor, ranging from a few hundred to a few thousand dollars.
8. Are there any preventive measures to avoid OBDII code P2118 in a 2010 Honda Accord?
- Regular maintenance, such as cleaning the throttle body, inspecting wiring, and addressing any engine performance issues promptly, can help prevent the occurrence of this code.
9. Will resetting the OBDII code P2118 in my 2010 Honda Accord make it go away permanently?
- Resetting the code may temporarily turn off the check engine light, but if the underlying issue is not resolved, the code is likely to reappear.
10. Can OBDII code P2118 in a 2010 Honda Accord affect fuel efficiency?
- Yes, this code can impact fuel efficiency due to the potential performance issues it causes, such as poor acceleration and engine power.
Discuss the causes and fixes for P2118 2010 Honda Accord OBDII Code
Code P2118 2010 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.