Engine-Codes.com
Engine-Codes – Toyota – P2118 2008 Toyota Prius

P2118 2008 Toyota Prius Code - Throttle Actuator Control Motor Current Range/Performance

Quick Answer

The P2118 diagnostic trouble code (DTC) for a 2008 Toyota Prius refers to the Throttle Actuator Control Motor Current Range/Performance. Common causes include Faulty throttle actuator control motor, Wiring or connector issues, Malfunctioning throttle position sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2118 2008 Toyota Prius indicates Throttle Actuator Control Motor Current Range/Performance.
Common causes
Common causes include Faulty throttle actuator control motor, Wiring or connector issues, Malfunctioning throttle position sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2118 2008 Toyota Prius Description

The P2118 diagnostic trouble code (DTC) for a 2008 Toyota Prius refers to the Throttle Actuator Control Motor Current Range/Performance. This code indicates that the Engine Control Module (ECM) has detected a problem with the throttle actuator control motor's current range or performance. The throttle actuator control motor is responsible for controlling the opening and closing of the throttle valve, which regulates the amount of air entering the engine. This, in turn, affects the engine's performance and fuel efficiency.

OBDII Code P2118 2008 Toyota Prius - Throttle Actuator Control Motor Current Range/Performance
P2118 2008 Toyota Prius Code - Throttle Actuator Control Motor Current Range/Performance

Common Causes of P2118 2008 Toyota Prius

  1. Faulty throttle actuator control motor
  2. Wiring or connector issues
  3. Malfunctioning throttle position sensor
  4. ECM malfunction
  5. Poor electrical connection

Symptoms of P2118 2008 Toyota Prius

  1. Erratic idling or stalling
  2. Lack of acceleration or reduced power output
  3. Poor fuel economy
  4. Difficulty starting
  5. Vehicle going into limp mode

How to Fix P2118 2008 Toyota Prius

  1. Begin by conducting a thorough inspection of the throttle actuator control motor, wiring, and connectors to identify any visible damage or loose connections.
  2. Test the throttle position sensor to determine if it is functioning correctly.
  3. Use a scan tool to check for any stored trouble codes and perform a reset to clear the code.
  4. If the issue persists, consider replacing the throttle actuator control motor or addressing any underlying electrical issues.
  5. After completing the repair, perform a test drive to ensure that the issue has been resolved and that the vehicle is operating smoothly.

Cost to Fix P2118 2008 Toyota Prius

The typical repair costs for addressing a P2118 code on a 2008 Toyota Prius can range from $200 to $500, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, but rates may be higher in metropolitan areas or at dealerships, while independent shops may offer lower rates. For a more accurate estimate, it's recommended to check local rates before proceeding with the repair.

When is the Code Detected?

The Engine Control Module (ECM) monitors the battery supply voltage applied to the electronic throttle actuator. When the power supply voltage drops below the threshold, the ECM concludes that the power supply circuit has an open circuit. A DTC is set and the MIL is turned on.

Need more information about the P2118 2008 Toyota Prius code?

Need more information on how to fix the P2118 2008 Toyota Prius code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2118 2008 Toyota Prius code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2118 2008 Toyota Prius Code

1. What are common symptoms of OBDII code P2118 on a 2008 Toyota Prius?

The common symptoms of code P2118 include the Check Engine Light illuminating on the dashboard, reduced engine power, and difficulty accelerating.

2. What does the OBDII code P2118 for a 2008 Toyota Prius indicate?

Code P2118 indicates an issue with the Throttle Actuator Control Motor current range or performance in the 2008 Toyota Prius.

3. What are possible causes of OBDII code P2118 in a 2008 Toyota Prius?

Possible causes of code P2118 in a 2008 Toyota Prius include a faulty throttle actuator control motor, wiring issues, or a problem with the throttle body.

4. How can I diagnose the OBDII code P2118 on my 2008 Toyota Prius?

Diagnosing code P2118 involves using an OBDII scanner to retrieve the code, checking the throttle actuator control motor and related wiring for any visible damage, and performing a thorough inspection of the throttle body.

5. Can I drive my 2008 Toyota Prius with OBDII code P2118?

It is not recommended to drive your 2008 Toyota Prius with code P2118, as it may lead to further damage and unsafe driving conditions. It is best to address the issue promptly.

6. How can I repair OBDII code P2118 on my 2008 Toyota Prius?

Repairing code P2118 may involve replacing the throttle actuator control motor, repairing any damaged wiring, or cleaning and recalibrating the throttle body. It is advisable to consult a professional mechanic for proper diagnosis and repair.

7. Can a DIY enthusiast fix OBDII code P2118 in a 2008 Toyota Prius?

While some basic troubleshooting steps can be performed by a DIY enthusiast, addressing code P2118 may require specialized tools and expertise. It is recommended to seek assistance from a qualified mechanic for proper diagnosis and repair.

8. Is OBDII code P2118 a serious issue in a 2008 Toyota Prius?

Code P2118 should be addressed promptly, as it can affect the performance and drivability of your 2008 Toyota Prius. Ignoring this code may lead to further complications and potentially unsafe driving conditions.

9. How much does it cost to fix OBDII code P2118 on a 2008 Toyota Prius?

The cost of fixing code P2118 on a 2008 Toyota Prius can vary depending on the underlying cause of the issue, parts needed for repair, and labor costs. It is advisable to get a diagnostic assessment from a mechanic for an accurate estimate.

10. How can I prevent OBDII code P2118 from recurring in my 2008 Toyota Prius?

To prevent the recurrence of code P2118 in your 2008 Toyota Prius, it is essential to perform regular maintenance, such as keeping the throttle body clean, inspecting wiring for signs of wear, and addressing any issues promptly to avoid further damage.

Discuss the causes and fixes for P2118 2008 Toyota Prius OBDII Code

Submit a New Comment

Code P2118 2008 Toyota Prius comments

No comments found for this page.