P2112 2012 Ford Fusion Code - Throttle Actuator Control System - Stuck Closed
Quick Answer
The P2112 code for a 2012 Ford Fusion indicates a problem with the Throttle Actuator Control System being stuck closed. Common causes include Malfunctioning throttle actuator motor, Faulty throttle position sensor, Wiring issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2112 2012 Ford Fusion indicates Throttle Actuator Control System - Stuck Closed.
- Common causes
- Common causes include Malfunctioning throttle actuator motor, Faulty throttle position sensor, Wiring issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2112 2012 Ford Fusion Description
The P2112 code for a 2012 Ford Fusion indicates a problem with the Throttle Actuator Control System being stuck closed. The Throttle Actuator Control System regulates the throttle valve opening in response to driver inputs. When the system is stuck closed, it means that the throttle valve is not able to open properly, leading to issues with engine performance and drivability.
Common Causes of P2112 2012 Ford Fusion
- Malfunctioning throttle actuator motor
- Faulty throttle position sensor
- Wiring issues
- Stuck throttle plate
- Carbon build-up in the throttle body
Symptoms of P2112 2012 Ford Fusion
- Reduced engine power
- Poor acceleration
- Rough idling
- Stalling
- Check Engine Light illuminated
How to Fix P2112 2012 Ford Fusion
- Begin by verifying the P2112 code with a diagnostic scan tool.
- Inspect the throttle actuator motor and throttle position sensor for any signs of damage or malfunction.
- Check the wiring harness for any loose or damaged connections and repair as necessary.
- Clean the throttle body and throttle plate to remove any carbon build-up that may be causing the issue.
- If the issue persists, consider replacing the throttle actuator motor or throttle position sensor.
Cost to Fix P2112 2012 Ford Fusion
The typical repair costs for addressing a P2112 code on a 2012 Ford Fusion can range from $200 to $500, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that the diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging between $80 and $150. Factors such as location, vehicle make and model, and engine type can also influence the final repair costs. It's recommended to consult with a qualified mechanic to get an accurate estimate for this repair.
When is the Code Detected?
Need more information about the P2112 2012 Ford Fusion code?
Need more information on how to fix the P2112 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2112 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2112 2012 Ford Fusion Code
1. What are the common symptoms of OBDII code P2112 (Throttle Actuator Control System - Stuck Closed) in a 2012 Ford Fusion?
The common symptoms include the engine stalling, lack of power, hesitation during acceleration, and the vehicle going into "limp mode" with limited power.
2. What are the possible causes of OBDII code P2112 in a 2012 Ford Fusion?
The code P2112 can be triggered by a faulty throttle body, a stuck throttle plate, wiring issues, or a malfunctioning electronic throttle control system.
3. How serious is OBDII code P2112 in a 2012 Ford Fusion?
Code P2112 should be taken seriously as it can affect the drivability of the vehicle and potentially lead to unsafe driving conditions. It is important to address this issue promptly.
4. Can I continue to drive my 2012 Ford Fusion with OBDII code P2112?
It is not recommended to continue driving your vehicle with code P2112 present, as it can lead to further damage and safety risks. It is advisable to have the issue diagnosed and repaired as soon as possible.
5. How can I diagnose OBDII code P2112 in my 2012 Ford Fusion?
Diagnosing code P2112 typically involves checking the throttle body for any obstructions, inspecting the wiring and connectors for damage, and performing tests on the electronic throttle control system using a diagnostic scanner.
6. Is it possible to repair OBDII code P2112 in a 2012 Ford Fusion myself?
While some basic troubleshooting steps can be done at home, diagnosing and repairing code P2112 often requires specialized tools and expertise. It is recommended to seek professional help for accurate diagnosis and repair.
7. What is the typical cost to repair OBDII code P2112 in a 2012 Ford Fusion?
The cost of repairing code P2112 can vary depending on the underlying cause of the issue. It may involve replacing the throttle body, repairing wiring, or addressing other related components. Costs can range from a few hundred to over a thousand dollars.
8. Can a dirty throttle body cause OBDII code P2112 in a 2012 Ford Fusion?
Yes, a dirty or clogged throttle body can restrict the movement of the throttle plate, leading to the throttle actuator control system being stuck closed and triggering code P2112. Regular maintenance, such as cleaning the throttle body, can help prevent this issue.
9. Will resetting the OBDII code P2112 in a 2012 Ford Fusion make it go away permanently?
Resetting the code may temporarily clear the warning light, but if the underlying issue is not addressed, the code is likely to return. It is crucial to diagnose and repair the root cause of the problem to prevent code P2112 from reoccurring.
10. How long does it typically take to repair OBDII code P2112 in a 2012 Ford Fusion?
The repair time for code P2112 can vary depending on the specific cause of the issue and the availability of parts. In general, it may take a few hours to a full day for a professional mechanic to diagnose and repair the problem.
Discuss the causes and fixes for P2112 2012 Ford Fusion OBDII Code
Code P2112 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.