P2112 2007 Ford Fusion Code - Throttle Actuator Control System - Stuck Closed
Quick Answer
The P2112 diagnostic trouble code (DTC) for a 2007 Ford Fusion indicates a problem with the Throttle Actuator Control System being stuck closed. Common causes include Faulty throttle body: The most common cause of a stuck closed throttle actuator is a malfunctioning throttle body, which may be due to wear and tear, electronic failures, or carbon buildup, Throttle position sensor issues: A faulty throttle position sensor can also cause the throttle actuator to become stuck closed, as it may not be sending the correct signals to the electronic control module, Wiring or connector problems: Issues with the wiring or connectors related to the throttle actuator control system can disrupt the communication between components and lead to the actuator getting stuck closed. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2112 2007 Ford Fusion indicates Throttle Actuator Control System - Stuck Closed.
- Common causes
- Common causes include Faulty throttle body: The most common cause of a stuck closed throttle actuator is a malfunctioning throttle body, which may be due to wear and tear, electronic failures, or carbon buildup, Throttle position sensor issues: A faulty throttle position sensor can also cause the throttle actuator to become stuck closed, as it may not be sending the correct signals to the electronic control module, Wiring or connector problems: Issues with the wiring or connectors related to the throttle actuator control system can disrupt the communication between components and lead to the actuator getting stuck closed.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2112 2007 Ford Fusion Description
The P2112 diagnostic trouble code (DTC) for a 2007 Ford Fusion indicates a problem with the Throttle Actuator Control System being stuck closed. This code is specifically related to the electronic throttle control system, which is responsible for regulating the amount of air entering the engine to control the vehicle's speed. When the throttle actuator is stuck closed, it means that the throttle plate inside the throttle body is not able to open properly, leading to a restriction in airflow. This can have a significant impact on the vehicle's performance, as it affects the engine's ability to respond to driver inputs and maintain the correct air-fuel mixture for combustion.
Common Causes of P2112 2007 Ford Fusion
- Faulty throttle body: The most common cause of a stuck closed throttle actuator is a malfunctioning throttle body, which may be due to wear and tear, electronic failures, or carbon buildup.
- Throttle position sensor issues: A faulty throttle position sensor can also cause the throttle actuator to become stuck closed, as it may not be sending the correct signals to the electronic control module.
- Wiring or connector problems: Issues with the wiring or connectors related to the throttle actuator control system can disrupt the communication between components and lead to the actuator getting stuck closed.
- Electronic control module failure: A malfunctioning electronic control module can also be a potential cause of the throttle actuator being stuck closed, as it is responsible for regulating the throttle body's operation.
Symptoms of P2112 2007 Ford Fusion
- Reduced engine power
- Poor acceleration
- Stalling
- Rough idling
- Vehicle going into limp mode
How to Fix P2112 2007 Ford Fusion
- Diagnose the issue: Use a diagnostic scan tool to retrieve the trouble codes and perform a thorough inspection of the throttle actuator control system to identify the root cause of the problem.
- Clean or replace throttle body: If the throttle body is found to be the culprit, it may need to be cleaned to remove any carbon buildup or replaced if it is beyond repair.
- Test throttle position sensor: Check the throttle position sensor for proper operation and replace it if necessary to ensure accurate throttle control.
- Inspect wiring and connectors: Examine the wiring and connectors for any signs of damage or corrosion, and repair or replace them as needed to restore proper communication between components.
- Reset electronic control module: Reset the electronic control module and perform a throttle body relearn procedure to recalibrate the throttle actuator control system.
Cost to Fix P2112 2007 Ford Fusion
The typical repair costs for addressing a P2112 code on a 2007 Ford Fusion can range from $200 to $500, depending on the specific cause of the issue and the parts and labor required for the repair. It's important to note that the actual cost may vary based on factors such as the location of the repair shop, the make and model of the vehicle, and the type of engine. Additionally, diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging between $80 and $150. It's recommended to obtain quotes from multiple shops to get a more accurate estimate for the repair.
When is the Code Detected?
Need more information about the P2112 2007 Ford Fusion code?
Need more information on how to fix the P2112 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2112 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2112 2007 Ford Fusion Code
1. What does the OBDII code P2112 mean on a 2007 Ford Fusion?
The P2112 code indicates that the Throttle Actuator Control (TAC) system is stuck in the closed position, meaning the throttle cannot move as it should. This can affect engine performance since the throttle valve controls airflow to the engine.
2. What are common symptoms of code P2112 in a 2007 Ford Fusion?
Symptoms include a lack of power, the engine running rough, poor acceleration, and the vehicle might enter a limp mode to prevent damage. You might also notice the check engine light is on.
3. What causes the throttle actuator control system to get stuck closed in a 2007 Ford Fusion?
Common causes include a faulty throttle actuator, carbon buildup preventing the throttle plate from moving, damaged wiring, or a faulty throttle position sensor.
4. How can I fix the OBDII code P2112 in my 2007 Ford Fusion?
Repairs might involve cleaning or replacing the throttle body, repairing any damaged wiring or connectors, or replacing the throttle position sensor or throttle actuator if they are faulty.
5. Is it safe to drive my 2007 Ford Fusion with the code P2112?
Driving with this code is not recommended as it can lead to reduced engine performance and potentially cause the vehicle to stall, which could be dangerous in traffic conditions.
6. How do I diagnose the P2112 code in a 2007 Ford Fusion?
Diagnosis should start with a visual inspection of the throttle body and associated wiring. Use an OBDII scanner to check for additional codes and a voltmeter to ensure the throttle actuator and position sensor are receiving the correct voltages.
7. Can a dirty throttle body cause the P2112 code on a 2007 Ford Fusion?
Yes, if the throttle body is dirty, it can prevent the throttle plate from moving freely, causing the system to register a P2112 code. Cleaning the throttle body can often resolve this issue.
8. What tools are needed to fix the P2112 error on a 2007 Ford Fusion?
You will need basic hand tools to remove and install the throttle body, an OBDII scanner to diagnose and clear the code, and possibly a multimeter to check electrical connections and voltages.
9. Could the P2112 code be triggered by electrical issues in a 2007 Ford Fusion?
Yes, electrical issues such as faulty wiring or bad connections can cause incorrect signals to be sent to the throttle actuator, leading to the P2112 code. Always check the electrical connections and wiring during diagnosis.
10. After repairing a P2112 issue, how do I ensure it is completely fixed in my 2007 Ford Fusion?
After repairs, clear the P2112 code using an OBDII scanner, then drive the vehicle to see if the code reappears. If it does not, and the vehicle performs well, the issue is likely resolved. Always ensure to perform a thorough test drive to cover various driving conditions.
Discuss the causes and fixes for P2112 2007 Ford Fusion OBDII Code
Code P2112 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.