P2108 GMC Code - Throttle Actuator Control Module Performance
Quick Answer
The P2108 GMC code indicates an issue with the Throttle Actuator Control Module (TAC) performance. Common causes include Faulty throttle actuator control module, Wiring or electrical issues, Dirty or faulty throttle body. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2108 GMC indicates Throttle Actuator Control Module Performance.
- Common causes
- Common causes include Faulty throttle actuator control module, Wiring or electrical issues, Dirty or faulty throttle body.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2108 GMC Description
The P2108 GMC code indicates an issue with the Throttle Actuator Control Module (TAC) performance. The TAC module is responsible for managing the opening and closing of the throttle valve in response to driver input. When this code is triggered, it means that the TAC module is not functioning correctly, which can lead to poor engine performance, reduced fuel efficiency, and potential safety hazards. The throttle may not respond properly to driver input, leading to stalling, hesitation, or lack of acceleration.
Common Causes of P2108 GMC
- Faulty throttle actuator control module
- Wiring or electrical issues
- Dirty or faulty throttle body
- Vacuum leaks
- Faulty throttle position sensor
Symptoms of P2108 GMC
- Engine stalling or hesitation
- Reduced engine power
- Check Engine Light illuminated
- Rough idling
- Difficulty accelerating
How to Fix P2108 GMC
- Diagnose the specific cause of the issue by conducting a thorough inspection of the TAC module, wiring, and related components.
- Replace the faulty throttle actuator control module if necessary.
- Clean or replace the throttle body to ensure proper functioning.
- Repair any wiring or electrical issues that may be causing the problem.
- Reset the vehicle's computer system to clear the error code and ensure the issue has been resolved.
Cost to Fix P2108 GMC
The cost of repairing a P2108 GMC code can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay between $200 and $500 for parts and labor. Keep in mind that rates at dealerships or in metropolitan areas may be higher, while independent shops may offer more affordable options. It's best to get a few quotes from different auto repair shops to find the best price for your specific situation.
Tech Notes for P2108 GMC
2006-2007 GMC Savana 1500/2500/3500
2006-2007 GMC Sierra
2006-2007 GMC Sierra Flex Fuel
2006-2007 GMC Sierra Hybrid
2006-2007 GMC Sierra Performance Edition
2006-2007 GMC Sierra 2500/3500 HD
2006-2007 GMC Yukon
GMC Factory Service Bulletin OBDII Code P2108
When is the Code Detected?
Need more information about the P2108 GMC code?
Need more information on how to fix the P2108 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2108 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2108 GMC Code
What does the OBDII code P2108 mean on a GMC?
P2108 indicates a performance issue with the Throttle Actuator Control (TAC) Module, which monitors and controls the electronic throttle system.
What are the common symptoms of the P2108 code in a GMC?
Symptoms may include reduced engine power, the vehicle going into "limp mode," poor throttle response, and the Check Engine Light being illuminated.
What causes the P2108 code on a GMC vehicle?
Common causes include a faulty throttle actuator control module, damaged wiring or connectors, software issues, or a failing throttle body.
Can a dirty throttle body trigger the P2108 code?
Yes, a dirty or malfunctioning throttle body can interfere with the throttle actuator's performance and trigger the P2108 code.
How do I diagnose the P2108 code on my GMC?
Diagnosis involves checking the throttle actuator control module and throttle body for faults, inspecting wiring for damage, and using a scan tool to monitor sensor data.
Can I still drive my GMC with the P2108 code?
Driving with this code is not recommended, as it may result in reduced engine performance or limp mode, which could compromise safety.
How can I fix the P2108 code on a GMC vehicle?
Repairs could include cleaning or replacing the throttle body, repairing damaged wiring, updating the TAC module’s software, or replacing the module if necessary.
How much does it cost to fix a P2108 code on a GMC?
Repair costs can vary widely, ranging from $100 for a throttle body cleaning to $500 or more for module replacement or wiring repairs.
Do I need to reset the code after repairs?
Yes, after completing repairs, use a scan tool to clear the code and verify that it does not return.
Can a low battery cause the P2108 code to appear?
Yes, a weak or failing battery may cause voltage irregularities that can affect the throttle actuator control module's performance and trigger the code.
Discuss the causes and fixes for P2108 GMC OBDII Code
Code P2108 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.