Engine-Codes - Ford - P2100 2006 FORD FUSION

P2100 2006 FORD FUSION - Throttle Actuator Control Motor Circuit Open

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What is this?
Table of contents

P2100 2006 FORD FUSION Possible Causes

  • Faulty Throttle Actuator Control Motor
  • Throttle Actuator Control Motor harness is open
  • Throttle Actuator Control Motor circuit poor electrical connection

How is the P2100 2006 FORD FUSION code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

What is the cost to diagnose the P2100 2006 FORD FUSION code

Labor: 1.0

The cost to diagnose the P2100 2006 FORD FUSION code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
How much do you know about cars?

Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge

Play Now

When is the code detected?

A powertrain control module (PCM) fault flag is set indicating the motor circuit is open, and may require cycling the key.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P2100 2006 FORD FUSION Meaning

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle.

More Information

Need more information on how to fix the P2100 2006 FORD FUSION code?
Get Access to Factory Service Manuals

Need more help?

Get the P2100 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area