Engine-Codes.com
Engine-Codes – Buick – P2092 Buick

P2092 Buick Code - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Low Voltage Bank 2

Quick Answer

The P2092 Buick code indicates a problem with the intake camshaft position actuator solenoid valve control circuit on Bank 2. Common causes include Wiring issues, Faulty actuator solenoid valve, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2092 Buick indicates Intake Camshaft Position Actuator Solenoid Valve Control Circuit Low Voltage Bank 2.
Common causes
Common causes include Wiring issues, Faulty actuator solenoid valve, Malfunctioning ECM.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 07, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2092 Buick Description

The P2092 Buick code indicates a problem with the intake camshaft position actuator solenoid valve control circuit on Bank 2. This component is responsible for controlling the intake camshaft position, which affects the timing of the intake valves in relation to the engine's operation. When the control circuit voltage is detected as low, it means that there is an issue with the electrical signal being sent to the actuator solenoid valve, which can lead to improper timing of the intake valves.

OBDII Code P2092 Buick - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Low Voltage Bank 2
P2092 Buick Code - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Low Voltage Bank 2

Common Causes of P2092 Buick

  1. Wiring issues
  2. Faulty actuator solenoid valve
  3. Malfunctioning ECM
  4. Camshaft position sensor problem

Symptoms of P2092 Buick

  1. Reduced engine power
  2. Poor fuel efficiency
  3. Rough idling
  4. Engine misfires
  5. Check engine light illuminated

How to Fix P2092 Buick

  1. Begin by inspecting the wiring connected to the intake camshaft position actuator solenoid valve for any damage or loose connections. Repair or replace any faulty wiring.
  2. Test the actuator solenoid valve to determine if it is functioning correctly. Replace the valve if it is found to be faulty.
  3. Check the ECM for any signs of damage or malfunction. If necessary, reprogram or replace the ECM.
  4. Inspect the camshaft position sensor for any issues. Replace the sensor if it is not working properly.
  5. Clear the diagnostic trouble codes and test drive the vehicle to ensure that the issue has been resolved.

Cost to Fix P2092 Buick

The typical repair costs for addressing a P2092 Buick code can vary depending on the specific cause of the issue. In general, parts for this repair can range from $100 to $300, while labor costs may be around $100 to $200. However, it's important to note that these are rough estimates and actual costs may vary based on factors such as location, vehicle make and model, and the rates of the auto repair shop. It's recommended to contact local shops for more accurate pricing information.

Need more information about the P2092 Buick code?

Need more information on how to fix the P2092 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2092 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2092 Buick Code

1. What does the OBDII code P2092 mean on a Buick?

P2092 indicates a low voltage issue in the intake camshaft position actuator solenoid valve control circuit for Bank 2.

2. What are the common symptoms of the P2092 code in a Buick?

Symptoms may include poor engine performance, rough idling, decreased fuel efficiency, and the check engine light turning on.

3. What causes the P2092 code in a Buick?

Common causes include a faulty camshaft position actuator solenoid, damaged wiring or connectors, a failing ECM, or low engine oil levels.

4. How do I diagnose the P2092 code on a Buick?

Diagnosis involves checking the solenoid valve, inspecting wiring and connectors for damage or corrosion, and verifying engine oil levels and pressure.

5. Can low engine oil cause the P2092 code in a Buick?

Yes, low or dirty engine oil can lead to improper camshaft actuator operation, triggering the P2092 code.

6. How is the P2092 code typically fixed on a Buick?

Repairs may include replacing the camshaft position actuator solenoid, repairing wiring or connectors, or addressing oil-related issues like a change or top-up.

7. Is it safe to drive a Buick with the P2092 code?

Driving is not recommended, as the issue can lead to poor engine performance and potential long-term damage if not resolved.

8. How much does it cost to repair the P2092 code on a Buick?

Repair costs vary but may range from $150 to $400, depending on whether the solenoid, wiring, or other components need replacement.

9. Can a faulty ECM cause the P2092 code in a Buick?

Yes, a malfunctioning ECM could fail to properly control the actuator solenoid, leading to the P2092 code.

10. How do I prevent the P2092 code from recurring in my Buick?

Regular oil changes, proper maintenance of electrical connections, and timely replacement of worn components can help prevent this code.

Discuss the causes and fixes for P2092 Buick OBDII Code

Submit a New Comment

Code P2092 Buick comments

No comments found for this page.