Engine-Codes.com
Engine-Codes – Chrysler – P2090 Chrysler

P2090 Chrysler Code - Bank 1 Camshaft 2 Position Actuator

Quick Answer

The P2090 Chrysler diagnostic trouble code (DTC) refers to the Bank 1 Camshaft 2 Position Actuator. Common causes include Faulty camshaft position actuator, Wiring or connector issues, Camshaft position sensor malfunction. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P2090 Chrysler indicates Bank 1 Camshaft 2 Position Actuator.
Common causes
Common causes include Faulty camshaft position actuator, Wiring or connector issues, Camshaft position sensor malfunction.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
What is this?
Table of contents Created and updated by William Orellana on Sep 09, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2090 Chrysler Description

The P2090 Chrysler diagnostic trouble code (DTC) refers to the Bank 1 Camshaft 2 Position Actuator. This code indicates that there is a malfunction in the camshaft position actuator for camshaft 2 on bank 1 of the engine. The camshaft position actuator is responsible for controlling the timing of the camshaft, which in turn controls the opening and closing of the engine valves. This is crucial for the proper operation of the engine, as it ensures that the valves open and close at the right time for optimal performance.

OBDII Code P2090 Chrysler - Bank 1 Camshaft 2 Position Actuator
P2090 Chrysler Code - Bank 1 Camshaft 2 Position Actuator

Common Causes of P2090 Chrysler

  1. Faulty camshaft position actuator
  2. Wiring or connector issues
  3. Camshaft position sensor malfunction
  4. Timing chain/belt problem
  5. Engine oil sludge buildup

Symptoms of P2090 Chrysler

  1. Rough engine idle
  2. Engine misfires
  3. Difficulty starting the engine
  4. Decreased fuel efficiency
  5. Increase in emissions

How to Fix P2090 Chrysler

  1. Diagnose the issue by using a scan tool to retrieve the P2090 code and inspecting the camshaft position actuator, sensor, and related components.
  2. Replace the faulty camshaft position actuator if necessary.
  3. Check and repair any wiring or connector issues.
  4. Verify the timing chain/belt is in good condition and replace if necessary.
  5. Clear the DTC and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P2090 Chrysler

The typical repair costs for addressing a P2090 Chrysler code can range from $200 to $500, including parts and labor. However, it's important to note that the specific diagnosis time and labor rates at auto repair shops can vary depending on various factors. Rates may be higher in metropolitan areas or at dealerships, while independent shops may offer lower prices. It's recommended to check with local shops for a more accurate estimate.

Need more information about the P2090 Chrysler code?

Need more information on how to fix the P2090 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2090 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2090 Chrysler Code

1. What does OBDII code P2090 mean for a Chrysler?

P2090 indicates an issue with the camshaft position actuator for Bank 1, Camshaft 2, where the actuator is not functioning as expected.

2. What are the common symptoms of code P2090?

Symptoms may include rough idling, reduced engine performance, poor fuel economy, and the Check Engine Light illuminating.

3. What causes the P2090 code to appear on a Chrysler?

Common causes include a malfunctioning camshaft position actuator, wiring issues, a faulty camshaft position sensor, or low engine oil levels.

4. Can low engine oil cause the P2090 code?

Yes, insufficient or dirty engine oil can affect the operation of the camshaft position actuator and trigger the P2090 code.

5. How can I diagnose the P2090 code on my Chrysler?

Start by checking the engine oil level and quality, inspecting the wiring and connectors around the camshaft position actuator, and testing the actuator and camshaft position sensor.

6. Is it safe to drive with the P2090 code?

It’s not recommended to drive for extended periods, as it could lead to further engine damage or reduced performance.

7. How do I fix the P2090 code?

Repairs may include replacing the camshaft position actuator, fixing damaged wiring, replacing the camshaft position sensor, or changing the engine oil and filter.

8. Can a bad camshaft position sensor cause the P2090 code?

Yes, a faulty camshaft position sensor may provide incorrect data to the engine control module, resulting in the P2090 code.

9. What does Bank 1, Camshaft 2 refer to in the P2090 code?

Bank 1 refers to the side of the engine with cylinder 1, and Camshaft 2 typically refers to the exhaust camshaft on that side.

10. How much does it cost to repair the P2090 code on a Chrysler?

Repair costs vary but may range from $150 to $500, depending on whether you need to replace the camshaft actuator, sensor, or perform other repairs.

Discuss the causes and fixes for P2090 Chrysler OBDII Code

Submit a New Comment

Code P2090 Chrysler comments

No comments found for this page.