Engine-Codes.com
Engine-Codes – GMC – P2088 2014 GMC Sierra

P2088 2014 GMC Sierra Code - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Low Voltage Bank 1

Quick Answer

The P2088 diagnostic trouble code (DTC) for a 2014 GMC Sierra specifically refers to the Intake Camshaft Position Actuator Solenoid Valve Control Circuit Low Voltage Bank 1. Common causes include Faulty Intake Camshaft Position Actuator Solenoid Valve: The solenoid valve itself may be defective and not functioning properly, Wiring or Connector Issues: Damaged or corroded wiring or connectors in the control circuit can cause a low voltage condition, Engine Control Module (ECM) Malfunction: A malfunctioning ECM can fail to properly control the intake camshaft position actuator solenoid valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2088 2014 GMC Sierra indicates Intake Camshaft Position Actuator Solenoid Valve Control Circuit Low Voltage Bank 1.
Common causes
Common causes include Faulty Intake Camshaft Position Actuator Solenoid Valve: The solenoid valve itself may be defective and not functioning properly, Wiring or Connector Issues: Damaged or corroded wiring or connectors in the control circuit can cause a low voltage condition, Engine Control Module (ECM) Malfunction: A malfunctioning ECM can fail to properly control the intake camshaft position actuator solenoid valve.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 30, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2088 2014 GMC Sierra Description

The P2088 diagnostic trouble code (DTC) for a 2014 GMC Sierra specifically refers to the Intake Camshaft Position Actuator Solenoid Valve Control Circuit Low Voltage Bank 1. This code indicates that there is a low voltage condition detected in the control circuit of the intake camshaft position actuator solenoid valve for bank 1. The intake camshaft position actuator solenoid valve is responsible for controlling the oil flow to the camshaft phaser, which in turn controls the timing of the intake camshaft. This precise timing is crucial for the engine to operate efficiently and smoothly.

OBDII Code P2088 2014 GMC Sierra - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Low Voltage Bank 1
P2088 2014 GMC Sierra Code - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Low Voltage Bank 1

Common Causes of P2088 2014 GMC Sierra

  1. Faulty Intake Camshaft Position Actuator Solenoid Valve: The solenoid valve itself may be defective and not functioning properly.
  2. Wiring or Connector Issues: Damaged or corroded wiring or connectors in the control circuit can cause a low voltage condition.
  3. Engine Control Module (ECM) Malfunction: A malfunctioning ECM can fail to properly control the intake camshaft position actuator solenoid valve.
  4. Low Engine Oil Levels: Inadequate engine oil levels can affect the operation of the solenoid valve and lead to a low voltage condition.
  5. Mechanical Engine Issues: Problems with the camshaft phaser or other related components can also trigger this code.

Symptoms of P2088 2014 GMC Sierra

  1. Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
  2. Reduced Engine Performance: The engine may experience reduced power and performance, leading to sluggish acceleration and overall poor drivability.
  3. Rough Idling: The engine may idle roughly or inconsistently, causing vibrations and shaking while the vehicle is stationary.
  4. Poor Fuel Efficiency: A decrease in fuel efficiency may be noticed, resulting in more frequent visits to the gas station.
  5. Engine Stalling: In severe cases, the engine may stall unexpectedly, especially at idle or low speeds.

How to Fix P2088 2014 GMC Sierra

  1. Diagnose the Issue: Use a diagnostic scanner to retrieve the trouble code and perform further testing to pinpoint the exact cause of the low voltage condition.
  2. Inspect Wiring and Connectors: Check the wiring harness and connectors for any damage, corrosion, or loose connections. Repair or replace as needed.
  3. Test Intake Camshaft Position Actuator Solenoid Valve: Test the solenoid valve for proper operation and replace if found to be faulty.
  4. Check Engine Control Module (ECM): Inspect the ECM for any signs of malfunction and reprogram or replace if necessary.
  5. Verify Repair: Clear the trouble code, test drive the vehicle, and ensure that the symptoms associated with the code have been resolved.

Cost to Fix P2088 2014 GMC Sierra

The typical repair costs for addressing a P2088 code on a 2014 GMC Sierra can vary depending on the specific cause of the issue. In general, the cost of parts such as a new intake camshaft position actuator solenoid valve and potential wiring repairs can range from $100 to $300. Labor costs at an auto repair shop can add an additional $100 to $300, depending on the shop's hourly rates and the complexity of the repair. Overall, the total cost for resolving this issue may fall between $200 and $600. It's important to note that these estimates are rough averages, and actual costs can vary based on factors such as location, vehicle make and model, and the extent of the repairs needed. It's recommended to obtain quotes from local auto repair shops for a more accurate cost estimate.

Need more information about the P2088 2014 GMC Sierra code?

Need more information on how to fix the P2088 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2088 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2088 2014 GMC Sierra Code

1. What are the common symptoms of OBDII code P2088 on a 2014 GMC Sierra?

- Common symptoms include rough idling, poor engine performance, decreased fuel efficiency, and potential stalling.

2. What does the OBDII code P2088 "Intake Camshaft Position Actuator Solenoid Valve Control Circuit Low Voltage Bank 1" mean for a 2014 GMC Sierra?

- This code indicates a potential issue with the control circuit of the intake camshaft position actuator solenoid valve on bank 1 in the engine.

3. What are the possible causes of OBDII code P2088 on a 2014 GMC Sierra?

- Causes may include a faulty camshaft position actuator solenoid valve, wiring or connector issues, low engine oil levels, or engine mechanical problems.

4. How can I diagnose the cause of OBDII code P2088 on my 2014 GMC Sierra?

- Diagnosis typically involves checking the camshaft position actuator solenoid valve, inspecting wiring and connectors for damage, ensuring proper engine oil levels, and performing a thorough scan with an OBDII scanner.

5. Can I continue to drive my 2014 GMC Sierra with OBDII code P2088 present?

- It is not recommended to drive the vehicle with this code present, as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.

6. What are some repair tips for fixing OBDII code P2088 on a 2014 GMC Sierra?

- Repair tips may include replacing the faulty camshaft position actuator solenoid valve, repairing any damaged wiring or connectors, ensuring proper engine oil levels, and clearing the trouble codes.

7. How much does it typically cost to repair OBDII code P2088 on a 2014 GMC Sierra?

- Repair costs can vary depending on the exact cause of the issue and labor rates in your area. It is recommended to consult with a professional mechanic for an accurate estimate.

8. How urgent is it to fix OBDII code P2088 on a 2014 GMC Sierra?

- It is important to address this code promptly to prevent potential engine damage and ensure the vehicle's optimal performance and reliability.

9. Can OBDII code P2088 on a 2014 GMC Sierra cause other problems if left unresolved?

- Leaving this code unresolved can lead to issues such as reduced engine efficiency, potential engine misfires, and further damage to engine components over time.

10. Is it possible to reset the OBDII code P2088 on a 2014 GMC Sierra without fixing the underlying issue?

- While you can clear the code with an OBDII scanner, it is not recommended to do so without addressing the root cause, as the issue may persist and trigger the code again.

Discuss the causes and fixes for P2088 2014 GMC Sierra OBDII Code

Submit a New Comment

Code P2088 2014 GMC Sierra comments

No comments found for this page.