P2086 Dodge Code - Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 2
Quick Answer
The P2086 code for Dodge vehicles indicates an issue with the Exhaust Gas Temperature (EGT) sensor circuit for Bank 2 Sensor 2. Common causes include Faulty EGT Sensor: The EGT sensor itself may be faulty, providing inaccurate readings to the ECM, Damaged Wiring or Connectors: Damage to the wiring or connectors in the EGT sensor circuit can disrupt the signal between the sensor and the ECM, ECM Issues: Problems with the engine control module can affect the EGT sensor's performance and readings. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P2086 Dodge indicates Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty EGT Sensor: The EGT sensor itself may be faulty, providing inaccurate readings to the ECM, Damaged Wiring or Connectors: Damage to the wiring or connectors in the EGT sensor circuit can disrupt the signal between the sensor and the ECM, ECM Issues: Problems with the engine control module can affect the EGT sensor's performance and readings.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2086 Dodge Description
The P2086 code for Dodge vehicles indicates an issue with the Exhaust Gas Temperature (EGT) sensor circuit for Bank 2 Sensor 2. This sensor is responsible for monitoring the exhaust gas temperature after it has passed through the catalytic converter. The EGT sensor plays a crucial role in ensuring optimal fuel efficiency, emissions control, and overall engine performance.
Common Causes of P2086 Dodge
- Faulty EGT Sensor: The EGT sensor itself may be faulty, providing inaccurate readings to the ECM.
- Damaged Wiring or Connectors: Damage to the wiring or connectors in the EGT sensor circuit can disrupt the signal between the sensor and the ECM.
- ECM Issues: Problems with the engine control module can affect the EGT sensor's performance and readings.
- Exhaust System Leaks: Leaks in the exhaust system can impact the EGT sensor's readings and trigger the P2086 code.
- Catalytic Converter Issues: Problems with the catalytic converter, such as clogging or damage, can affect exhaust gas temperatures and trigger the code.
Symptoms of P2086 Dodge
- Check Engine Light: The most common symptom associated with the P2086 code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Decreased Fuel Efficiency: A malfunctioning EGT sensor can lead to suboptimal fuel combustion, resulting in decreased fuel efficiency.
- Rough Idle: A faulty EGT sensor can cause engine misfires or rough idling as the ECM struggles to adjust fuel delivery based on inaccurate sensor readings.
- Increased Emissions: A malfunctioning EGT sensor can lead to increased emissions output, potentially causing the vehicle to fail emissions tests.
- Reduced Engine Performance: The ECM relies on accurate data from the EGT sensor to adjust engine parameters for optimal performance. A faulty sensor can result in reduced engine performance and responsiveness.
How to Fix P2086 Dodge
- Diagnostic Scan: Begin by using a diagnostic scanner to read and clear the P2086 code from the ECM.
- EGT Sensor Replacement: Inspect the EGT sensor for any signs of damage or malfunction and replace it if necessary.
- Check Wiring and Connectors: Inspect the wiring and connectors in the EGT sensor circuit for any damage or corrosion. Repair or replace as needed.
- Verify Repair: After completing the repairs, clear the code from the ECM and test drive the vehicle to ensure that the issue has been resolved.
- Emissions Test: Consider conducting an emissions test after the repair to ensure that the vehicle is meeting emissions standards.
Cost to Fix P2086 Dodge
The cost of repairing the P2086 code for a Dodge vehicle can vary depending on the specific model, year, and engine type. On average, the cost of replacing an EGT sensor and addressing related issues can range from $200 to $500, including parts and labor. Additional costs may be incurred if there are other underlying issues contributing to the code. It's important to note that labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. Rates may be higher at dealerships or in metropolitan areas, while independent shops may offer more competitive pricing. It's recommended to obtain a detailed estimate from a professional mechanic to determine the exact cost of repairing the P2086 code for your specific vehicle.
Need more information about the P2086 Dodge code?
Need more information on how to fix the P2086 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2086 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2086 Dodge Code
No Frequently Asked Questions about P2086 Dodge Code found.
Discuss the causes and fixes for P2086 Dodge OBDII Code
Code P2086 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.