P207E Ford Code - Intake Manifold Tuning Valve Position Sensor/Switch Circuit Intermittent Bank 2
Quick Answer
The P207E Ford code indicates a problem with the Intake Manifold Tuning Valve Position Sensor/Switch Circuit on Bank 2 of the vehicle. Common causes include Loose or Corroded Electrical Connections: Poor electrical connections can disrupt the signal transmission between the sensor/switch and ECM, Damaged Wiring: Frayed or damaged wiring can cause intermittent circuit issues, Faulty Sensor/Switch: The sensor/switch itself may be malfunctioning and require replacement. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P207E Ford indicates Intake Manifold Tuning Valve Position Sensor/Switch Circuit Intermittent Bank 2.
- Common causes
- Common causes include Loose or Corroded Electrical Connections: Poor electrical connections can disrupt the signal transmission between the sensor/switch and ECM, Damaged Wiring: Frayed or damaged wiring can cause intermittent circuit issues, Faulty Sensor/Switch: The sensor/switch itself may be malfunctioning and require replacement.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P207E Ford Description
The P207E Ford code indicates a problem with the Intake Manifold Tuning Valve Position Sensor/Switch Circuit on Bank 2 of the vehicle. In modern vehicles, the intake manifold tuning valve plays a crucial role in optimizing the flow of air into the engine for combustion. This sensor or switch monitors the position of the valve and sends signals to the engine control module (ECM) to adjust the intake manifold accordingly. When this circuit is intermittent, it means that there is a disruption in the communication between the sensor/switch and the ECM, potentially leading to incorrect air/fuel ratios and suboptimal engine performance.
Common Causes of P207E Ford
- Loose or Corroded Electrical Connections: Poor electrical connections can disrupt the signal transmission between the sensor/switch and ECM.
- Damaged Wiring: Frayed or damaged wiring can cause intermittent circuit issues.
- Faulty Sensor/Switch: The sensor/switch itself may be malfunctioning and require replacement.
- ECM Malfunction: A faulty ECM can also cause communication errors with the sensor/switch.
- Intake Manifold Tuning Valve Issues: Problems with the valve itself, such as clogging or malfunction, can trigger this code.
Symptoms of P207E Ford
- Check Engine Light: The most common symptom associated with this code is the illumination of the Check Engine Light on the dashboard.
- Reduced Power: The vehicle may experience a loss of power, especially during acceleration.
- Rough Idling: The engine may run rough or exhibit uneven idling.
- Poor Fuel Economy: A decrease in fuel efficiency may be observed due to incorrect air/fuel ratios.
- Engine Stalling: In severe cases, the engine may stall while driving or at idle.
How to Fix P207E Ford
- Diagnostic Scan: Begin by using a diagnostic scanner to retrieve the specific error codes and pinpoint the issue with the intake manifold tuning valve position sensor/switch.
- Inspection: Inspect the sensor/switch, wiring, and connections for any visible damage or corrosion.
- Repair or Replace: Repair any damaged wiring or connections, and replace the sensor/switch if it is faulty.
- Clear Codes: After the repair, clear the error codes and reset the ECM to see if the issue has been resolved.
- Test Drive: Take the vehicle for a test drive to ensure that the symptoms associated with the code have been eliminated.
Cost to Fix P207E Ford
The typical repair costs for addressing the P207E Ford code can vary depending on the specific cause of the issue and the labor rates in your area. On average, the parts cost for a new intake manifold tuning valve position sensor/switch can range from $50 to $150, while labor costs can add another $100 to $200. Overall, the total repair cost may fall between $150 and $350, excluding any additional diagnostic fees or taxes.
Need more information about the P207E Ford code?
Need more information on how to fix the P207E Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P207E Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P207E Ford Code
No Frequently Asked Questions about P207E Ford Code found.
Discuss the causes and fixes for P207E Ford OBDII Code
Code P207E Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.